Care Coordination Management
0.0.1 - ci-build Estonia (EST)

Care Coordination Management, published by Helex OÜ. This guide is not an authorized publication; it is the continuous build for version 0.0.1 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/helexlab/ig-ccm/ and changes regularly. See the Directory of published versions

Resource Profile: ResearchStudyCcm - Detailed Descriptions

Draft as of 2025-12-05

Definitions for the research-study-ccm resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. ResearchStudy
Definition

A scientific study of nature that sometimes includes processes involved in health and disease. For example, clinical trials are research studies that involve people. These studies may be related to new ways to screen, prevent, diagnose, and treat disease. They may also study certain outcomes and certain groups of people by looking at data collected in the past or future.

ShortInvestigation to increase healthcare-related patient-independent knowledge
Comments

Need to make sure we encompass public health studies.

Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate NamesClinical Trial, Study
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. ResearchStudy.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. ResearchStudy.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. ResearchStudy.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on ResearchStudy.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 8. ResearchStudy.extension:location
    Slice Namelocation
    Definition

    Aadressiandmete süsteemi (ADS) aadressi versiooni unikaalne identifikaator

    ShortADS ADR-ID extension
    Control0..*
    TypeExtension(EEBase ADS AdrId) (Extension Type: Coding)
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. ResearchStudy.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Must Supportfalse
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. ResearchStudy.identifier
    Definition

    Identifiers assigned to this research study by the sponsor or other systems.

    ShortBusiness Identifier for study
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control10..*
    TypeIdentifier
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Allows identification of the research study as it is known by various participating systems and in a way that remains consistent across servers.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. ResearchStudy.title
    Definition

    The human readable name of the research study.

    ShortName ResearchStudy (in Lithuanian)Human readable name of the study
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. ResearchStudy.title.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortName ResearchStudy (in English)Additional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on ResearchStudy.title.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 18. ResearchStudy.title.extension:translation
      Slice Nametranslation
      Definition

      Language translation from base language of resource to another language.

      ShortLanguage Translation (Localization)
      Control0..*
      TypeExtension(Translation) (Complex Extension)
      Is Modifierfalse
      Must Supporttrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      20. ResearchStudy.label
      Definition

      Additional names for the study.

      ShortAdditional names for the study
      Control0..0*
      TypeBackboneElement
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      23. ResearchStudy.protocol
      Definition

      The set of steps expected to be performed as part of the execution of the study.

      ShortSteps followed in executing study
      Control0..0*
      TypeReference(PlanDefinition)
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      25. ResearchStudy.partOf
      Definition

      A larger research study of which this particular study is a component or step.

      ShortPart of larger study
      Control0..0*
      TypeReference(ResearchStudy)
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Requirements

      Allows breaking a study into components (e.g. by study site) each with their own PI, status, enrollment, etc.

      Alternate Namescontainer
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      27. ResearchStudy.relatedArtifact
      Definition

      Citations, references, URLs and other related documents. When using relatedArtifact to share URLs, the relatedArtifact.type will often be set to one of "documentation" or "supported-with" and the URL value will often be in relatedArtifact.document.url but another possible location is relatedArtifact.resource when it is a canonical URL.

      ShortReferences, URLs, and attachments
      Control0..0*
      TypeRelatedArtifact
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      29. ResearchStudy.status
      Definition

      The publication state of the resource (not of the study).

      Shortdraft | active | retired | unknown
      Control1..1
      BindingThe codes SHALL be taken from PublicationStatushttp://hl7.org/fhir/ValueSet/publication-status|5.0.0
      (required to http://hl7.org/fhir/ValueSet/publication-status|5.0.0)

      Codes that convey the current publication status of the research study resource.

      Typecode
      Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      31. ResearchStudy.primaryPurposeType
      Definition

      The type of study based upon the intent of the study activities. A classification of the intent of the study.

      Shorttreatment | prevention | diagnostic | supportive-care | screening | health-services-research | basic-science | device-feasibility
      Control0..01
      BindingThe codes SHOULD be taken from ResearchStudyPrimaryPurposeTypehttp://hl7.org/fhir/ValueSet/research-study-prim-purp-type|5.0.0
      (preferred to http://hl7.org/fhir/ValueSet/research-study-prim-purp-type|5.0.0)

      Codes for the main intent of the study.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      33. ResearchStudy.phase
      Definition

      The stage in the progression of a therapy from initial experimental use in humans in clinical trials to post-market evaluation.

      Shortn-a | early-phase-1 | phase-1 | phase-1-phase-2 | phase-2 | phase-2-phase-3 | phase-3 | phase-4
      Control0..01
      BindingFor example codes, see ResearchStudyPhasehttp://hl7.org/fhir/ValueSet/research-study-phase|5.0.0
      (example to http://hl7.org/fhir/ValueSet/research-study-phase|5.0.0)

      Codes for the stage in the progression of a therapy from initial experimental use in humans in clinical trials to post-market evaluation.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      35. ResearchStudy.studyDesign
      Definition

      Codes categorizing the type of study such as investigational vs. observational, type of blinding, type of randomization, safety vs. efficacy, etc.

      ShortClassifications of the study design characteristics
      Control0..0*
      BindingThe codes SHOULD be taken from StudyDesignhttp://hl7.org/fhir/ValueSet/study-design|5.0.0
      (preferred to http://hl7.org/fhir/ValueSet/study-design|5.0.0)

      This is a set of terms for study design characteristics.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      37. ResearchStudy.focus
      Definition

      The medication(s), food(s), therapy(ies), device(s) or other concerns or interventions that the study is seeking to gain more information about.

      ShortDrugs, devices, etc. under study
      Control0..0*
      BindingFor example codes, see ResearchStudyFocusTypehttp://hl7.org/fhir/ValueSet/research-study-focus-type|5.0.0
      (example to http://hl7.org/fhir/ValueSet/research-study-focus-type|5.0.0)

      Common codes of research study focus

      TypeCodeableReference(Medication, MedicinalProductDefinition, SubstanceDefinition, EvidenceVariable)
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      39. ResearchStudy.condition
      Definition

      The condition that is the focus of the study. For example, In a study to examine risk factors for Lupus, might have as an inclusion criterion "healthy volunteer", but the target condition code would be a Lupus SNOMED code.

      ShortCondition being studied
      Control0..0*
      BindingFor example codes, see ConditionProblemDiagnosisCodeshttp://hl7.org/fhir/ValueSet/condition-code|5.0.0
      (example to http://hl7.org/fhir/ValueSet/condition-code|5.0.0)

      Identification of the condition or diagnosis.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      41. ResearchStudy.keyword
      Definition

      Key terms to aid in searching for or filtering the study.

      ShortUsed to search for the study
      Control0..0*
      Binding

      Words associated with the study that may be useful in discovery.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      43. ResearchStudy.region
      Definition

      A country, state or other area where the study is taking place rather than its precise geographic location or address.

      ShortGeographic area for the study
      Control0..0*
      BindingUnless not suitable, these codes SHALL be taken from JurisdictionValueSethttp://hl7.org/fhir/ValueSet/jurisdiction|5.0.0
      (extensible to http://hl7.org/fhir/ValueSet/jurisdiction|5.0.0)

      Countries and regions within which this artifact is targeted for use.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      45. ResearchStudy.descriptionSummary
      Definition

      A brief text for explaining the study.

      ShortBrief text explaining the study
      Control0..01
      Typemarkdown
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      47. ResearchStudy.description
      Definition

      A detailed and human-readable narrative of the study. E.g., study abstract.

      ShortDetailed narrative of the study
      Control0..01
      Typemarkdown
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      49. ResearchStudy.period
      Definition

      Identifies the start date and the expected (or actual, depending on status) end date for the study.

      ShortWhen the study began and ended
      Control0..01
      TypePeriod
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Alternate Namestiming
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      51. ResearchStudy.site
      Definition

      A facility in which study activities are conducted.

      ShortFacility where study activities are conducted
      Control0..0*
      TypeReference(Location, ResearchStudy, Organization)
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      53. ResearchStudy.note
      Definition

      Comments made about the study by the performer, subject or other participants.

      ShortComments made about the study
      Control0..0*
      TypeAnnotation
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      55. ResearchStudy.classifier
      Definition

      Additional grouping mechanism or categorization of a research study. Example: FDA regulated device, FDA regulated drug, MPG Paragraph 23b (a German legal requirement), IRB-exempt, etc. Implementation Note: do not use the classifier element to support existing semantics that are already supported thru explicit elements in the resource.

      ShortClassification for the study
      Control0..0*
      BindingFor example codes, see ResearchStudyClassifiershttp://hl7.org/fhir/ValueSet/research-study-classifiers|5.0.0
      (example to http://hl7.org/fhir/ValueSet/research-study-classifiers|5.0.0)

      desc.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      57. ResearchStudy.associatedParty
      Definition

      Sponsors, collaborators, and other parties.

      ShortSponsors, collaborators, and other parties
      Comments

      For a Sponsor or a PrincipalInvestigator use the dedicated attributes provided.

      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      While there are explicit attributes for a Sponsor and a PrincipalInvestigator many trial record a range of other organizations and individuals in key roles.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      59. ResearchStudy.associatedParty.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      61. ResearchStudy.associatedParty.name
      Definition

      Name of associated party.

      ShortName of associated party
      Control10..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      63. ResearchStudy.associatedParty.role
      Definition

      Type of association.

      Shortsponsor | lead-sponsor | sponsor-investigator | primary-investigator | collaborator | funding-source | general-contact | recruitment-contact | sub-investigator | study-director | study-chair
      Control1..1
      BindingUnless not suitable, these codes SHALL be taken from ResearchStudyPartyRolehttp://hl7.org/fhir/ValueSet/research-study-party-role|5.0.0
      (extensible to http://hl7.org/fhir/ValueSet/research-study-party-role|5.0.0)

      desc.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      65. ResearchStudy.associatedParty.period
      Definition

      Identifies the start date and the end date of the associated party in the role.

      ShortWhen active in the role
      Comments

      The cardinality is 0..* due to the fact that an associated party may be intermittently active in a given role over multiple time periods.

      Control10..1*
      TypePeriod
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      67. ResearchStudy.associatedParty.party
      Definition

      Individual or organization associated with study (use practitionerRole to specify their organisation).

      ShortIndividual or organization associated with study (use practitionerRole to specify their organisation)
      Comments

      Suggestions of a better attribute name are appreciated

      Control10..1
      TypeReference(Practitioner, Practitioner, PractitionerRole, Organization)
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      69. ResearchStudy.progressStatus
      Definition

      Status of study with time for that status.

      ShortStatus of study with time for that status
      Control0..0*
      TypeBackboneElement
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      73. ResearchStudy.whyStopped
      Definition

      A description and/or code explaining the premature termination of the study.

      Shortaccrual-goal-met | closed-due-to-toxicity | closed-due-to-lack-of-study-progress | temporarily-closed-per-study-design
      Control0..01
      BindingFor example codes, see ResearchStudyReasonStoppedhttp://hl7.org/fhir/ValueSet/research-study-reason-stopped|5.0.0
      (example to http://hl7.org/fhir/ValueSet/research-study-reason-stopped|5.0.0)

      Codes for why the study ended prematurely.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      75. ResearchStudy.recruitment
      Definition

      Target or actual group of participants enrolled in study.

      ShortTarget or actual group of participants enrolled in study
      Control0..01
      TypeBackboneElement
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      78. ResearchStudy.comparisonGroup
      Definition

      Describes an expected event or sequence of events for one of the subjects of a study. E.g. for a living subject: exposure to drug A, wash-out, exposure to drug B, wash-out, follow-up. E.g. for a stability study: {store sample from lot A at 25 degrees for 1 month}, {store sample from lot A at 40 degrees for 1 month}.

      ShortDefined path through the study for a subject
      Comments

      In many clinical trials this is refered to as the ARM of the study, but such a term is not used in other sorts of trials even when there is a comparison between two or more groups.

      Control0..0*
      TypeBackboneElement
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate Namesarm
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      82. ResearchStudy.objective
      Definition

      A goal that the study is aiming to achieve in terms of a scientific question to be answered by the analysis of data collected during the study.

      ShortA goal for the study
      Control0..0*
      TypeBackboneElement
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      85. ResearchStudy.outcomeMeasure
      Definition

      An "outcome measure", "endpoint", "effect measure" or "measure of effect" is a specific measurement or observation used to quantify the effect of experimental variables on the participants in a study, or for observational studies, to describe patterns of diseases or traits or associations with exposures, risk factors or treatment.

      ShortA variable measured during the study
      Comments

      A study may have multiple distinct outcome measures that can be used to assess the overall goal for a study. The goal of a study is in the objective whereas the metric by which the goal is assessed is the outcomeMeasure. Examples: Time to Local Recurrence (TLR), Disease-free Survival (DFS), 30 Day Mortality, Systolic BP

      Control0..0*
      TypeBackboneElement
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      88. ResearchStudy.result
      Definition

      Link to one or more sets of results generated by the study. Could also link to a research registry holding the results such as ClinicalTrials.gov.

      ShortLink to results generated during the study
      Control0..0*
      TypeReference(EvidenceReport, Citation, DiagnosticReport)
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be foundhere

      0. ResearchStudy
      2. ResearchStudy.extension
      SlicingThis element introduces a set of slices on ResearchStudy.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 4. ResearchStudy.extension:location
        Slice Namelocation
        Control0..*
        TypeExtension(EEBase ADS AdrId) (Extension Type: Coding)
        6. ResearchStudy.identifier
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control1..?
        Must Supporttrue
        8. ResearchStudy.title
        ShortName ResearchStudy (in Lithuanian)
        Control1..?
        Must Supporttrue
        10. ResearchStudy.title.extension
        ShortName ResearchStudy (in English)
        SlicingThis element introduces a set of slices on ResearchStudy.title.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 12. ResearchStudy.title.extension:translation
          Slice Nametranslation
          Control0..*
          TypeExtension(Translation) (Complex Extension)
          Must Supporttrue
          14. ResearchStudy.label
          Control0..0
          16. ResearchStudy.protocol
          Control0..0
          18. ResearchStudy.partOf
          Control0..0
          20. ResearchStudy.relatedArtifact
          Control0..0
          22. ResearchStudy.primaryPurposeType
          Control0..0
          24. ResearchStudy.phase
          Control0..0
          26. ResearchStudy.studyDesign
          Control0..0
          28. ResearchStudy.focus
          Control0..0
          30. ResearchStudy.condition
          Control0..0
          32. ResearchStudy.keyword
          Control0..0
          34. ResearchStudy.region
          Control0..0
          36. ResearchStudy.descriptionSummary
          Control0..0
          38. ResearchStudy.description
          Control0..0
          40. ResearchStudy.period
          Control0..0
          42. ResearchStudy.site
          Control0..0
          44. ResearchStudy.note
          Control0..0
          46. ResearchStudy.classifier
          Control0..0
          48. ResearchStudy.associatedParty
          Must Supporttrue
          50. ResearchStudy.associatedParty.name
          Control1..?
          Must Supporttrue
          52. ResearchStudy.associatedParty.role
          Must Supporttrue
          54. ResearchStudy.associatedParty.period
          Control1..1
          Must Supporttrue
          56. ResearchStudy.associatedParty.party
          Control1..?
          TypeReference(Practitioner)
          Must Supporttrue
          58. ResearchStudy.progressStatus
          Control0..0
          60. ResearchStudy.whyStopped
          Control0..0
          62. ResearchStudy.recruitment
          Control0..0
          64. ResearchStudy.comparisonGroup
          Control0..0
          66. ResearchStudy.objective
          Control0..0
          68. ResearchStudy.outcomeMeasure
          Control0..0
          70. ResearchStudy.result
          Control0..0

          Guidance on how to interpret the contents of this table can be foundhere

          0. ResearchStudy
          Definition

          A scientific study of nature that sometimes includes processes involved in health and disease. For example, clinical trials are research studies that involve people. These studies may be related to new ways to screen, prevent, diagnose, and treat disease. They may also study certain outcomes and certain groups of people by looking at data collected in the past or future.

          ShortInvestigation to increase healthcare-related patient-independent knowledge
          Comments

          Need to make sure we encompass public health studies.

          Control0..*
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Alternate NamesClinical Trial, Study
          Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
          dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
          dom-6: A resource should have narrative for robust management (text.`div`.exists())
          2. ResearchStudy.id
          Definition

          The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

          ShortLogical id of this artifact
          Comments

          Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

          Control0..1
          Typeid
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          4. ResearchStudy.meta
          Definition

          The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

          ShortMetadata about the resource
          Control0..1
          TypeMeta
          Is Modifierfalse
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          6. ResearchStudy.implicitRules
          Definition

          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

          ShortA set of rules under which this content was created
          Comments

          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

          Control0..1
          Typeuri
          Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          8. ResearchStudy.language
          Definition

          The base language in which the resource is written.

          ShortLanguage of the resource content
          Comments

          Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

          Control0..1
          BindingThe codes SHALL be taken from AllLanguages
          (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

          IETF language tag for a human language

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          10. ResearchStudy.text
          Definition

          A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

          ShortText summary of the resource, for human interpretation
          Comments

          Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

          Control0..1
          This element is affected by the following invariants: dom-6
          TypeNarrative
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Alternate Namesnarrative, html, xhtml, display
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          12. ResearchStudy.contained
          Definition

          These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

          ShortContained, inline Resources
          Comments

          This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

          Control0..*
          This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
          TypeResource
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Alternate Namesinline resources, anonymous resources, contained resources
          14. ResearchStudy.extension
          Definition

          An Extension

          ShortExtension
          Control0..*
          TypeExtension
          Is Modifierfalse
          Must Supportfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on ResearchStudy.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 16. ResearchStudy.extension:location
            Slice Namelocation
            Definition

            Aadressiandmete süsteemi (ADS) aadressi versiooni unikaalne identifikaator

            ShortADS ADR-ID extension
            Control0..*
            TypeExtension(EEBase ADS AdrId) (Extension Type: Coding)
            Is Modifierfalse
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            18. ResearchStudy.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
            Must Supportfalse
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            20. ResearchStudy.url
            Definition

            Canonical identifier for this study resource, represented as a globally unique URI.

            ShortCanonical identifier for this study resource
            Control0..1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            22. ResearchStudy.identifier
            Definition

            Identifiers assigned to this research study by the sponsor or other systems.

            ShortBusiness Identifier for study
            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control1..*
            TypeIdentifier
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Requirements

            Allows identification of the research study as it is known by various participating systems and in a way that remains consistent across servers.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            24. ResearchStudy.version
            Definition

            The business version for the study record.

            ShortThe business version for the study record
            NoteThis is a business version Id, not a resource version Id (see discussion)
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            26. ResearchStudy.name
            Definition

            Name for this study (computer friendly).

            ShortName for this study (computer friendly)
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supportfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            28. ResearchStudy.title
            Definition

            The human readable name of the research study.

            ShortName ResearchStudy (in Lithuanian)
            Control1..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            30. ResearchStudy.title.id
            Definition

            unique id for the element within a resource (for internal references)

            Shortxml:id (or equivalent in JSON)
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            32. ResearchStudy.title.extension
            Definition

            An Extension

            ShortName ResearchStudy (in English)
            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on ResearchStudy.title.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 34. ResearchStudy.title.extension:translation
              Slice Nametranslation
              Definition

              Language translation from base language of resource to another language.

              ShortLanguage Translation (Localization)
              Control0..*
              TypeExtension(Translation) (Complex Extension)
              Is Modifierfalse
              Must Supporttrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              36. ResearchStudy.title.value
              Definition

              The actual value

              ShortPrimitive value for string
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              Max Length:1048576
              38. ResearchStudy.label
              Definition

              Additional names for the study.

              ShortAdditional names for the study
              Control0..0
              TypeBackboneElement
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              45. ResearchStudy.protocol
              Definition

              The set of steps expected to be performed as part of the execution of the study.

              ShortSteps followed in executing study
              Control0..0
              TypeReference(PlanDefinition)
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              47. ResearchStudy.partOf
              Definition

              A larger research study of which this particular study is a component or step.

              ShortPart of larger study
              Control0..0
              TypeReference(ResearchStudy)
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Requirements

              Allows breaking a study into components (e.g. by study site) each with their own PI, status, enrollment, etc.

              Alternate Namescontainer
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              49. ResearchStudy.relatedArtifact
              Definition

              Citations, references, URLs and other related documents. When using relatedArtifact to share URLs, the relatedArtifact.type will often be set to one of "documentation" or "supported-with" and the URL value will often be in relatedArtifact.document.url but another possible location is relatedArtifact.resource when it is a canonical URL.

              ShortReferences, URLs, and attachments
              Control0..0
              TypeRelatedArtifact
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              51. ResearchStudy.date
              Definition

              The date (and optionally time) when the ResearchStudy Resource was last significantly changed. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the ResearchStudy Resource changes.

              ShortDate the resource last changed
              Control0..1
              TypedateTime
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              53. ResearchStudy.status
              Definition

              The publication state of the resource (not of the study).

              Shortdraft | active | retired | unknown
              Control1..1
              BindingThe codes SHALL be taken from PublicationStatus
              (required to http://hl7.org/fhir/ValueSet/publication-status|5.0.0)

              Codes that convey the current publication status of the research study resource.

              Typecode
              Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              55. ResearchStudy.primaryPurposeType
              Definition

              The type of study based upon the intent of the study activities. A classification of the intent of the study.

              Shorttreatment | prevention | diagnostic | supportive-care | screening | health-services-research | basic-science | device-feasibility
              Control0..0
              BindingThe codes SHOULD be taken from ResearchStudyPrimaryPurposeType
              (preferred to http://hl7.org/fhir/ValueSet/research-study-prim-purp-type|5.0.0)

              Codes for the main intent of the study.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              57. ResearchStudy.phase
              Definition

              The stage in the progression of a therapy from initial experimental use in humans in clinical trials to post-market evaluation.

              Shortn-a | early-phase-1 | phase-1 | phase-1-phase-2 | phase-2 | phase-2-phase-3 | phase-3 | phase-4
              Control0..0
              BindingFor example codes, see ResearchStudyPhase
              (example to http://hl7.org/fhir/ValueSet/research-study-phase|5.0.0)

              Codes for the stage in the progression of a therapy from initial experimental use in humans in clinical trials to post-market evaluation.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              59. ResearchStudy.studyDesign
              Definition

              Codes categorizing the type of study such as investigational vs. observational, type of blinding, type of randomization, safety vs. efficacy, etc.

              ShortClassifications of the study design characteristics
              Control0..0
              BindingThe codes SHOULD be taken from StudyDesign
              (preferred to http://hl7.org/fhir/ValueSet/study-design|5.0.0)

              This is a set of terms for study design characteristics.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              61. ResearchStudy.focus
              Definition

              The medication(s), food(s), therapy(ies), device(s) or other concerns or interventions that the study is seeking to gain more information about.

              ShortDrugs, devices, etc. under study
              Control0..0
              BindingFor example codes, see ResearchStudyFocusType
              (example to http://hl7.org/fhir/ValueSet/research-study-focus-type|5.0.0)

              Common codes of research study focus

              TypeCodeableReference(Medication, MedicinalProductDefinition, SubstanceDefinition, EvidenceVariable)
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              63. ResearchStudy.condition
              Definition

              The condition that is the focus of the study. For example, In a study to examine risk factors for Lupus, might have as an inclusion criterion "healthy volunteer", but the target condition code would be a Lupus SNOMED code.

              ShortCondition being studied
              Control0..0
              BindingFor example codes, see ConditionProblemDiagnosisCodes
              (example to http://hl7.org/fhir/ValueSet/condition-code|5.0.0)

              Identification of the condition or diagnosis.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              65. ResearchStudy.keyword
              Definition

              Key terms to aid in searching for or filtering the study.

              ShortUsed to search for the study
              Control0..0
              Binding

              Words associated with the study that may be useful in discovery.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              67. ResearchStudy.region
              Definition

              A country, state or other area where the study is taking place rather than its precise geographic location or address.

              ShortGeographic area for the study
              Control0..0
              BindingUnless not suitable, these codes SHALL be taken from JurisdictionValueSet
              (extensible to http://hl7.org/fhir/ValueSet/jurisdiction|5.0.0)

              Countries and regions within which this artifact is targeted for use.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              69. ResearchStudy.descriptionSummary
              Definition

              A brief text for explaining the study.

              ShortBrief text explaining the study
              Control0..0
              Typemarkdown
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              71. ResearchStudy.description
              Definition

              A detailed and human-readable narrative of the study. E.g., study abstract.

              ShortDetailed narrative of the study
              Control0..0
              Typemarkdown
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              73. ResearchStudy.period
              Definition

              Identifies the start date and the expected (or actual, depending on status) end date for the study.

              ShortWhen the study began and ended
              Control0..0
              TypePeriod
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Alternate Namestiming
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              75. ResearchStudy.site
              Definition

              A facility in which study activities are conducted.

              ShortFacility where study activities are conducted
              Control0..0
              TypeReference(Location, ResearchStudy, Organization)
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              77. ResearchStudy.note
              Definition

              Comments made about the study by the performer, subject or other participants.

              ShortComments made about the study
              Control0..0
              TypeAnnotation
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              79. ResearchStudy.classifier
              Definition

              Additional grouping mechanism or categorization of a research study. Example: FDA regulated device, FDA regulated drug, MPG Paragraph 23b (a German legal requirement), IRB-exempt, etc. Implementation Note: do not use the classifier element to support existing semantics that are already supported thru explicit elements in the resource.

              ShortClassification for the study
              Control0..0
              BindingFor example codes, see ResearchStudyClassifiers
              (example to http://hl7.org/fhir/ValueSet/research-study-classifiers|5.0.0)

              desc.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              81. ResearchStudy.associatedParty
              Definition

              Sponsors, collaborators, and other parties.

              ShortSponsors, collaborators, and other parties
              Comments

              For a Sponsor or a PrincipalInvestigator use the dedicated attributes provided.

              Control0..*
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Requirements

              While there are explicit attributes for a Sponsor and a PrincipalInvestigator many trial record a range of other organizations and individuals in key roles.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              83. ResearchStudy.associatedParty.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              This element is affected by the following invariants: ele-1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              85. ResearchStudy.associatedParty.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              87. ResearchStudy.associatedParty.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              89. ResearchStudy.associatedParty.name
              Definition

              Name of associated party.

              ShortName of associated party
              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              91. ResearchStudy.associatedParty.role
              Definition

              Type of association.

              Shortsponsor | lead-sponsor | sponsor-investigator | primary-investigator | collaborator | funding-source | general-contact | recruitment-contact | sub-investigator | study-director | study-chair
              Control1..1
              BindingUnless not suitable, these codes SHALL be taken from ResearchStudyPartyRole
              (extensible to http://hl7.org/fhir/ValueSet/research-study-party-role|5.0.0)

              desc.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              93. ResearchStudy.associatedParty.period
              Definition

              Identifies the start date and the end date of the associated party in the role.

              ShortWhen active in the role
              Comments

              The cardinality is 0..* due to the fact that an associated party may be intermittently active in a given role over multiple time periods.

              Control1..1
              TypePeriod
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              95. ResearchStudy.associatedParty.classifier
              Definition

              A categorization other than role for the associated party.

              Shortnih | fda | government | nonprofit | academic | industry
              Control0..*
              BindingFor example codes, see ResearchStudyPartyOrgType
              (example to http://hl7.org/fhir/ValueSet/research-study-party-organization-type|5.0.0)

              A characterization or type of the entity.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              97. ResearchStudy.associatedParty.party
              Definition

              Individual or organization associated with study (use practitionerRole to specify their organisation).

              ShortIndividual or organization associated with study (use practitionerRole to specify their organisation)
              Comments

              Suggestions of a better attribute name are appreciated

              Control1..1
              TypeReference(Practitioner)
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              99. ResearchStudy.progressStatus
              Definition

              Status of study with time for that status.

              ShortStatus of study with time for that status
              Control0..0
              TypeBackboneElement
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              107. ResearchStudy.whyStopped
              Definition

              A description and/or code explaining the premature termination of the study.

              Shortaccrual-goal-met | closed-due-to-toxicity | closed-due-to-lack-of-study-progress | temporarily-closed-per-study-design
              Control0..0
              BindingFor example codes, see ResearchStudyReasonStopped
              (example to http://hl7.org/fhir/ValueSet/research-study-reason-stopped|5.0.0)

              Codes for why the study ended prematurely.

              TypeCodeableConcept
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              109. ResearchStudy.recruitment
              Definition

              Target or actual group of participants enrolled in study.

              ShortTarget or actual group of participants enrolled in study
              Control0..0
              TypeBackboneElement
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              118. ResearchStudy.comparisonGroup
              Definition

              Describes an expected event or sequence of events for one of the subjects of a study. E.g. for a living subject: exposure to drug A, wash-out, exposure to drug B, wash-out, follow-up. E.g. for a stability study: {store sample from lot A at 25 degrees for 1 month}, {store sample from lot A at 40 degrees for 1 month}.

              ShortDefined path through the study for a subject
              Comments

              In many clinical trials this is refered to as the ARM of the study, but such a term is not used in other sorts of trials even when there is a comparison between two or more groups.

              Control0..0
              TypeBackboneElement
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Alternate Namesarm
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              129. ResearchStudy.objective
              Definition

              A goal that the study is aiming to achieve in terms of a scientific question to be answered by the analysis of data collected during the study.

              ShortA goal for the study
              Control0..0
              TypeBackboneElement
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              137. ResearchStudy.outcomeMeasure
              Definition

              An "outcome measure", "endpoint", "effect measure" or "measure of effect" is a specific measurement or observation used to quantify the effect of experimental variables on the participants in a study, or for observational studies, to describe patterns of diseases or traits or associations with exposures, risk factors or treatment.

              ShortA variable measured during the study
              Comments

              A study may have multiple distinct outcome measures that can be used to assess the overall goal for a study. The goal of a study is in the objective whereas the metric by which the goal is assessed is the outcomeMeasure. Examples: Time to Local Recurrence (TLR), Disease-free Survival (DFS), 30 Day Mortality, Systolic BP

              Control0..0
              TypeBackboneElement
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              146. ResearchStudy.result
              Definition

              Link to one or more sets of results generated by the study. Could also link to a research registry holding the results such as ClinicalTrials.gov.

              ShortLink to results generated during the study
              Control0..0
              TypeReference(EvidenceReport, Citation, DiagnosticReport)
              Is Modifierfalse
              Must Supportfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))