Care Coordination Management
0.0.1 - ci-build Estonia (EST)

Care Coordination Management, published by Helex OÜ. This guide is not an authorized publication; it is the continuous build for version 0.0.1 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/helexlab/ig-ccm/ and changes regularly. See the Directory of published versions

Resource Profile: CcmResearchStudy - Detailed Descriptions

Draft as of 2025-08-20

Definitions for the CcmResearchStudy resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. ResearchStudy
Definition

A scientific study of nature that sometimes includes processes involved in health and disease. For example, clinical trials are research studies that involve people. These studies may be related to new ways to screen, prevent, diagnose, and treat disease. They may also study certain outcomes and certain groups of people by looking at data collected in the past or future.

ShortInvestigation to increase healthcare-related patient-independent knowledge
Comments

Need to make sure we encompass public health studies.

Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate NamesClinical Trial, Study
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. ResearchStudy.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. ResearchStudy.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. ResearchStudy.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on ResearchStudy.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 8. ResearchStudy.extension:location
    Slice Namelocation
    Definition

    Aadressiandmete süsteemi (ADS) aadressi versiooni unikaalne identifikaator

    ShortADS ADR-ID extension
    Control0..*
    TypeExtension(EEBase ADS AdrId) (Extension Type: Coding)
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. ResearchStudy.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Must Supportfalse
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. ResearchStudy.identifier
    Definition

    Identifiers assigned to this research study by the sponsor or other systems.

    ShortBusiness Identifier for study
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control10..*
    TypeIdentifier
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Allows identification of the research study as it is known by various participating systems and in a way that remains consistent across servers.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. ResearchStudy.title
    Definition

    The human readable name of the research study.

    ShortHuman readable name of the study
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. ResearchStudy.label
    Definition

    Additional names for the study.

    ShortAdditional names for the study
    Control0..0*
    TypeBackboneElement
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    19. ResearchStudy.protocol
    Definition

    The set of steps expected to be performed as part of the execution of the study.

    ShortSteps followed in executing study
    Control0..0*
    TypeReference(PlanDefinition)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    21. ResearchStudy.partOf
    Definition

    A larger research study of which this particular study is a component or step.

    ShortPart of larger study
    Control0..0*
    TypeReference(ResearchStudy)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Requirements

    Allows breaking a study into components (e.g. by study site) each with their own PI, status, enrollment, etc.

    Alternate Namescontainer
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    23. ResearchStudy.relatedArtifact
    Definition

    Citations, references, URLs and other related documents. When using relatedArtifact to share URLs, the relatedArtifact.type will often be set to one of "documentation" or "supported-with" and the URL value will often be in relatedArtifact.document.url but another possible location is relatedArtifact.resource when it is a canonical URL.

    ShortReferences, URLs, and attachments
    Control0..0*
    TypeRelatedArtifact
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    25. ResearchStudy.status
    Definition

    The publication state of the resource (not of the study).

    Shortdraft | active | retired | unknown
    Control1..1
    BindingThe codes SHALL be taken from PublicationStatushttp://hl7.org/fhir/ValueSet/publication-status|5.0.0
    (required to http://hl7.org/fhir/ValueSet/publication-status|5.0.0)

    Codes that convey the current publication status of the research study resource.

    Typecode
    Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    27. ResearchStudy.primaryPurposeType
    Definition

    The type of study based upon the intent of the study activities. A classification of the intent of the study.

    Shorttreatment | prevention | diagnostic | supportive-care | screening | health-services-research | basic-science | device-feasibility
    Control0..01
    BindingThe codes SHOULD be taken from ResearchStudyPrimaryPurposeTypehttp://hl7.org/fhir/ValueSet/research-study-prim-purp-type
    (preferred to http://hl7.org/fhir/ValueSet/research-study-prim-purp-type)

    Codes for the main intent of the study.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    29. ResearchStudy.phase
    Definition

    The stage in the progression of a therapy from initial experimental use in humans in clinical trials to post-market evaluation.

    Shortn-a | early-phase-1 | phase-1 | phase-1-phase-2 | phase-2 | phase-2-phase-3 | phase-3 | phase-4
    Control0..01
    BindingFor example codes, see ResearchStudyPhasehttp://hl7.org/fhir/ValueSet/research-study-phase
    (example to http://hl7.org/fhir/ValueSet/research-study-phase)

    Codes for the stage in the progression of a therapy from initial experimental use in humans in clinical trials to post-market evaluation.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    31. ResearchStudy.studyDesign
    Definition

    Codes categorizing the type of study such as investigational vs. observational, type of blinding, type of randomization, safety vs. efficacy, etc.

    ShortClassifications of the study design characteristics
    Control0..0*
    BindingThe codes SHOULD be taken from StudyDesignhttp://hl7.org/fhir/ValueSet/study-design
    (preferred to http://hl7.org/fhir/ValueSet/study-design)

    This is a set of terms for study design characteristics.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    33. ResearchStudy.focus
    Definition

    The medication(s), food(s), therapy(ies), device(s) or other concerns or interventions that the study is seeking to gain more information about.

    ShortDrugs, devices, etc. under study
    Control0..0*
    BindingFor example codes, see ResearchStudyFocusTypehttp://hl7.org/fhir/ValueSet/research-study-focus-type
    (example to http://hl7.org/fhir/ValueSet/research-study-focus-type)

    Common codes of research study focus

    TypeCodeableReference(Medication, MedicinalProductDefinition, SubstanceDefinition, EvidenceVariable)
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    35. ResearchStudy.condition
    Definition

    The condition that is the focus of the study. For example, In a study to examine risk factors for Lupus, might have as an inclusion criterion "healthy volunteer", but the target condition code would be a Lupus SNOMED code.

    ShortCondition being studied
    Control0..0*
    BindingFor example codes, see ConditionProblemDiagnosisCodeshttp://hl7.org/fhir/ValueSet/condition-code
    (example to http://hl7.org/fhir/ValueSet/condition-code)

    Identification of the condition or diagnosis.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    37. ResearchStudy.keyword
    Definition

    Key terms to aid in searching for or filtering the study.

    ShortUsed to search for the study
    Control0..0*
    Binding

    Words associated with the study that may be useful in discovery.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    39. ResearchStudy.region
    Definition

    A country, state or other area where the study is taking place rather than its precise geographic location or address.

    ShortGeographic area for the study
    Control0..0*
    BindingUnless not suitable, these codes SHALL be taken from JurisdictionValueSethttp://hl7.org/fhir/ValueSet/jurisdiction
    (extensible to http://hl7.org/fhir/ValueSet/jurisdiction)

    Countries and regions within which this artifact is targeted for use.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    41. ResearchStudy.descriptionSummary
    Definition

    A brief text for explaining the study.

    ShortBrief text explaining the study
    Control0..01
    Typemarkdown
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    43. ResearchStudy.description
    Definition

    A detailed and human-readable narrative of the study. E.g., study abstract.

    ShortDetailed narrative of the study
    Control0..01
    Typemarkdown
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    45. ResearchStudy.period
    Definition

    Identifies the start date and the expected (or actual, depending on status) end date for the study.

    ShortWhen the study began and ended
    Control0..01
    TypePeriod
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Alternate Namestiming
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    47. ResearchStudy.site
    Definition

    A facility in which study activities are conducted.

    ShortFacility where study activities are conducted
    Control0..0*
    TypeReference(Location, ResearchStudy, Organization)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    49. ResearchStudy.note
    Definition

    Comments made about the study by the performer, subject or other participants.

    ShortComments made about the study
    Control0..0*
    TypeAnnotation
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    51. ResearchStudy.classifier
    Definition

    Additional grouping mechanism or categorization of a research study. Example: FDA regulated device, FDA regulated drug, MPG Paragraph 23b (a German legal requirement), IRB-exempt, etc. Implementation Note: do not use the classifier element to support existing semantics that are already supported thru explicit elements in the resource.

    ShortClassification for the study
    Control0..0*
    BindingFor example codes, see ResearchStudyClassifiershttp://hl7.org/fhir/ValueSet/research-study-classifiers
    (example to http://hl7.org/fhir/ValueSet/research-study-classifiers)

    desc.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    53. ResearchStudy.associatedParty
    Definition

    Sponsors, collaborators, and other parties.

    ShortSponsors, collaborators, and other parties
    Comments

    For a Sponsor or a PrincipalInvestigator use the dedicated attributes provided.

    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    While there are explicit attributes for a Sponsor and a PrincipalInvestigator many trial record a range of other organizations and individuals in key roles.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    55. ResearchStudy.associatedParty.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    57. ResearchStudy.associatedParty.name
    Definition

    Name of associated party.

    ShortName of associated party
    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    59. ResearchStudy.associatedParty.role
    Definition

    Type of association.

    Shortsponsor | lead-sponsor | sponsor-investigator | primary-investigator | collaborator | funding-source | general-contact | recruitment-contact | sub-investigator | study-director | study-chair
    Control1..1
    BindingUnless not suitable, these codes SHALL be taken from ResearchStudyPartyRolehttp://hl7.org/fhir/ValueSet/research-study-party-role
    (extensible to http://hl7.org/fhir/ValueSet/research-study-party-role)

    desc.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    61. ResearchStudy.associatedParty.period
    Definition

    Identifies the start date and the end date of the associated party in the role.

    ShortWhen active in the role
    Comments

    The cardinality is 0..* due to the fact that an associated party may be intermittently active in a given role over multiple time periods.

    Control10..1*
    TypePeriod
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    63. ResearchStudy.associatedParty.party
    Definition

    Individual or organization associated with study (use practitionerRole to specify their organisation).

    ShortIndividual or organization associated with study (use practitionerRole to specify their organisation)
    Comments

    Suggestions of a better attribute name are appreciated

    Control10..1
    TypeReference(Practitioner, PractitionerRole, Organization)
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    65. ResearchStudy.progressStatus
    Definition

    Status of study with time for that status.

    ShortStatus of study with time for that status
    Control0..0*
    TypeBackboneElement
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    69. ResearchStudy.whyStopped
    Definition

    A description and/or code explaining the premature termination of the study.

    Shortaccrual-goal-met | closed-due-to-toxicity | closed-due-to-lack-of-study-progress | temporarily-closed-per-study-design
    Control0..01
    BindingFor example codes, see ResearchStudyReasonStoppedhttp://hl7.org/fhir/ValueSet/research-study-reason-stopped
    (example to http://hl7.org/fhir/ValueSet/research-study-reason-stopped)

    Codes for why the study ended prematurely.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    71. ResearchStudy.recruitment
    Definition

    Target or actual group of participants enrolled in study.

    ShortTarget or actual group of participants enrolled in study
    Control0..01
    TypeBackboneElement
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    74. ResearchStudy.comparisonGroup
    Definition

    Describes an expected event or sequence of events for one of the subjects of a study. E.g. for a living subject: exposure to drug A, wash-out, exposure to drug B, wash-out, follow-up. E.g. for a stability study: {store sample from lot A at 25 degrees for 1 month}, {store sample from lot A at 40 degrees for 1 month}.

    ShortDefined path through the study for a subject
    Comments

    In many clinical trials this is refered to as the ARM of the study, but such a term is not used in other sorts of trials even when there is a comparison between two or more groups.

    Control0..0*
    TypeBackboneElement
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Alternate Namesarm
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    78. ResearchStudy.objective
    Definition

    A goal that the study is aiming to achieve in terms of a scientific question to be answered by the analysis of data collected during the study.

    ShortA goal for the study
    Control0..0*
    TypeBackboneElement
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    81. ResearchStudy.outcomeMeasure
    Definition

    An "outcome measure", "endpoint", "effect measure" or "measure of effect" is a specific measurement or observation used to quantify the effect of experimental variables on the participants in a study, or for observational studies, to describe patterns of diseases or traits or associations with exposures, risk factors or treatment.

    ShortA variable measured during the study
    Comments

    A study may have multiple distinct outcome measures that can be used to assess the overall goal for a study. The goal of a study is in the objective whereas the metric by which the goal is assessed is the outcomeMeasure. Examples: Time to Local Recurrence (TLR), Disease-free Survival (DFS), 30 Day Mortality, Systolic BP

    Control0..0*
    TypeBackboneElement
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    84. ResearchStudy.result
    Definition

    Link to one or more sets of results generated by the study. Could also link to a research registry holding the results such as ClinicalTrials.gov.

    ShortLink to results generated during the study
    Control0..0*
    TypeReference(EvidenceReport, Citation, DiagnosticReport)
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be foundhere

    0. ResearchStudy
    2. ResearchStudy.extension
    SlicingThis element introduces a set of slices on ResearchStudy.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 4. ResearchStudy.extension:location
      Slice Namelocation
      Control0..*
      TypeExtension(EEBase ADS AdrId) (Extension Type: Coding)
      6. ResearchStudy.identifier
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control1..?
      Must Supporttrue
      8. ResearchStudy.title
      Control1..?
      Must Supporttrue
      10. ResearchStudy.label
      Control0..0
      12. ResearchStudy.protocol
      Control0..0
      14. ResearchStudy.partOf
      Control0..0
      16. ResearchStudy.relatedArtifact
      Control0..0
      18. ResearchStudy.primaryPurposeType
      Control0..0
      20. ResearchStudy.phase
      Control0..0
      22. ResearchStudy.studyDesign
      Control0..0
      24. ResearchStudy.focus
      Control0..0
      26. ResearchStudy.condition
      Control0..0
      28. ResearchStudy.keyword
      Control0..0
      30. ResearchStudy.region
      Control0..0
      32. ResearchStudy.descriptionSummary
      Control0..0
      34. ResearchStudy.description
      Control0..0
      36. ResearchStudy.period
      Control0..0
      38. ResearchStudy.site
      Control0..0
      40. ResearchStudy.note
      Control0..0
      42. ResearchStudy.classifier
      Control0..0
      44. ResearchStudy.associatedParty
      Must Supporttrue
      46. ResearchStudy.associatedParty.name
      Control1..?
      Must Supporttrue
      48. ResearchStudy.associatedParty.role
      Must Supporttrue
      50. ResearchStudy.associatedParty.period
      Control1..1
      Must Supporttrue
      52. ResearchStudy.associatedParty.party
      Control1..?
      TypeReference(Practitioner)
      Must Supporttrue
      54. ResearchStudy.progressStatus
      Control0..0
      56. ResearchStudy.whyStopped
      Control0..0
      58. ResearchStudy.recruitment
      Control0..0
      60. ResearchStudy.comparisonGroup
      Control0..0
      62. ResearchStudy.objective
      Control0..0
      64. ResearchStudy.outcomeMeasure
      Control0..0
      66. ResearchStudy.result
      Control0..0

      Guidance on how to interpret the contents of this table can be foundhere

      0. ResearchStudy
      Definition

      A scientific study of nature that sometimes includes processes involved in health and disease. For example, clinical trials are research studies that involve people. These studies may be related to new ways to screen, prevent, diagnose, and treat disease. They may also study certain outcomes and certain groups of people by looking at data collected in the past or future.

      ShortInvestigation to increase healthcare-related patient-independent knowledge
      Comments

      Need to make sure we encompass public health studies.

      Control0..*
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate NamesClinical Trial, Study
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      2. ResearchStudy.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

      Control0..1
      Typeid
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      4. ResearchStudy.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. ResearchStudy.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. ResearchStudy.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHALL be taken from AllLanguages
      (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

      IETF language tag for a human language

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. ResearchStudy.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      This element is affected by the following invariants: dom-6
      TypeNarrative
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. ResearchStudy.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

      Control0..*
      This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
      TypeResource
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. ResearchStudy.extension
      Definition

      An Extension

      ShortExtension
      Control0..*
      TypeExtension
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on ResearchStudy.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 16. ResearchStudy.extension:location
        Slice Namelocation
        Definition

        Aadressiandmete süsteemi (ADS) aadressi versiooni unikaalne identifikaator

        ShortADS ADR-ID extension
        Control0..*
        TypeExtension(EEBase ADS AdrId) (Extension Type: Coding)
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        18. ResearchStudy.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Must Supportfalse
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        20. ResearchStudy.url
        Definition

        Canonical identifier for this study resource, represented as a globally unique URI.

        ShortCanonical identifier for this study resource
        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. ResearchStudy.identifier
        Definition

        Identifiers assigned to this research study by the sponsor or other systems.

        ShortBusiness Identifier for study
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control1..*
        TypeIdentifier
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Allows identification of the research study as it is known by various participating systems and in a way that remains consistent across servers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. ResearchStudy.version
        Definition

        The business version for the study record.

        ShortThe business version for the study record
        NoteThis is a business version Id, not a resource version Id (see discussion)
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. ResearchStudy.name
        Definition

        Name for this study (computer friendly).

        ShortName for this study (computer friendly)
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. ResearchStudy.title
        Definition

        The human readable name of the research study.

        ShortHuman readable name of the study
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. ResearchStudy.label
        Definition

        Additional names for the study.

        ShortAdditional names for the study
        Control0..0
        TypeBackboneElement
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        37. ResearchStudy.protocol
        Definition

        The set of steps expected to be performed as part of the execution of the study.

        ShortSteps followed in executing study
        Control0..0
        TypeReference(PlanDefinition)
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        39. ResearchStudy.partOf
        Definition

        A larger research study of which this particular study is a component or step.

        ShortPart of larger study
        Control0..0
        TypeReference(ResearchStudy)
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Requirements

        Allows breaking a study into components (e.g. by study site) each with their own PI, status, enrollment, etc.

        Alternate Namescontainer
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        41. ResearchStudy.relatedArtifact
        Definition

        Citations, references, URLs and other related documents. When using relatedArtifact to share URLs, the relatedArtifact.type will often be set to one of "documentation" or "supported-with" and the URL value will often be in relatedArtifact.document.url but another possible location is relatedArtifact.resource when it is a canonical URL.

        ShortReferences, URLs, and attachments
        Control0..0
        TypeRelatedArtifact
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        43. ResearchStudy.date
        Definition

        The date (and optionally time) when the ResearchStudy Resource was last significantly changed. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the ResearchStudy Resource changes.

        ShortDate the resource last changed
        Control0..1
        TypedateTime
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        45. ResearchStudy.status
        Definition

        The publication state of the resource (not of the study).

        Shortdraft | active | retired | unknown
        Control1..1
        BindingThe codes SHALL be taken from PublicationStatus
        (required to http://hl7.org/fhir/ValueSet/publication-status|5.0.0)

        Codes that convey the current publication status of the research study resource.

        Typecode
        Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        47. ResearchStudy.primaryPurposeType
        Definition

        The type of study based upon the intent of the study activities. A classification of the intent of the study.

        Shorttreatment | prevention | diagnostic | supportive-care | screening | health-services-research | basic-science | device-feasibility
        Control0..0
        BindingThe codes SHOULD be taken from ResearchStudyPrimaryPurposeType
        (preferred to http://hl7.org/fhir/ValueSet/research-study-prim-purp-type)

        Codes for the main intent of the study.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        49. ResearchStudy.phase
        Definition

        The stage in the progression of a therapy from initial experimental use in humans in clinical trials to post-market evaluation.

        Shortn-a | early-phase-1 | phase-1 | phase-1-phase-2 | phase-2 | phase-2-phase-3 | phase-3 | phase-4
        Control0..0
        BindingFor example codes, see ResearchStudyPhase
        (example to http://hl7.org/fhir/ValueSet/research-study-phase)

        Codes for the stage in the progression of a therapy from initial experimental use in humans in clinical trials to post-market evaluation.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        51. ResearchStudy.studyDesign
        Definition

        Codes categorizing the type of study such as investigational vs. observational, type of blinding, type of randomization, safety vs. efficacy, etc.

        ShortClassifications of the study design characteristics
        Control0..0
        BindingThe codes SHOULD be taken from StudyDesign
        (preferred to http://hl7.org/fhir/ValueSet/study-design)

        This is a set of terms for study design characteristics.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        53. ResearchStudy.focus
        Definition

        The medication(s), food(s), therapy(ies), device(s) or other concerns or interventions that the study is seeking to gain more information about.

        ShortDrugs, devices, etc. under study
        Control0..0
        BindingFor example codes, see ResearchStudyFocusType
        (example to http://hl7.org/fhir/ValueSet/research-study-focus-type)

        Common codes of research study focus

        TypeCodeableReference(Medication, MedicinalProductDefinition, SubstanceDefinition, EvidenceVariable)
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        55. ResearchStudy.condition
        Definition

        The condition that is the focus of the study. For example, In a study to examine risk factors for Lupus, might have as an inclusion criterion "healthy volunteer", but the target condition code would be a Lupus SNOMED code.

        ShortCondition being studied
        Control0..0
        BindingFor example codes, see ConditionProblemDiagnosisCodes
        (example to http://hl7.org/fhir/ValueSet/condition-code)

        Identification of the condition or diagnosis.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        57. ResearchStudy.keyword
        Definition

        Key terms to aid in searching for or filtering the study.

        ShortUsed to search for the study
        Control0..0
        Binding

        Words associated with the study that may be useful in discovery.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        59. ResearchStudy.region
        Definition

        A country, state or other area where the study is taking place rather than its precise geographic location or address.

        ShortGeographic area for the study
        Control0..0
        BindingUnless not suitable, these codes SHALL be taken from JurisdictionValueSet
        (extensible to http://hl7.org/fhir/ValueSet/jurisdiction)

        Countries and regions within which this artifact is targeted for use.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        61. ResearchStudy.descriptionSummary
        Definition

        A brief text for explaining the study.

        ShortBrief text explaining the study
        Control0..0
        Typemarkdown
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        63. ResearchStudy.description
        Definition

        A detailed and human-readable narrative of the study. E.g., study abstract.

        ShortDetailed narrative of the study
        Control0..0
        Typemarkdown
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        65. ResearchStudy.period
        Definition

        Identifies the start date and the expected (or actual, depending on status) end date for the study.

        ShortWhen the study began and ended
        Control0..0
        TypePeriod
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Alternate Namestiming
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        67. ResearchStudy.site
        Definition

        A facility in which study activities are conducted.

        ShortFacility where study activities are conducted
        Control0..0
        TypeReference(Location, ResearchStudy, Organization)
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        69. ResearchStudy.note
        Definition

        Comments made about the study by the performer, subject or other participants.

        ShortComments made about the study
        Control0..0
        TypeAnnotation
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        71. ResearchStudy.classifier
        Definition

        Additional grouping mechanism or categorization of a research study. Example: FDA regulated device, FDA regulated drug, MPG Paragraph 23b (a German legal requirement), IRB-exempt, etc. Implementation Note: do not use the classifier element to support existing semantics that are already supported thru explicit elements in the resource.

        ShortClassification for the study
        Control0..0
        BindingFor example codes, see ResearchStudyClassifiers
        (example to http://hl7.org/fhir/ValueSet/research-study-classifiers)

        desc.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        73. ResearchStudy.associatedParty
        Definition

        Sponsors, collaborators, and other parties.

        ShortSponsors, collaborators, and other parties
        Comments

        For a Sponsor or a PrincipalInvestigator use the dedicated attributes provided.

        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Requirements

        While there are explicit attributes for a Sponsor and a PrincipalInvestigator many trial record a range of other organizations and individuals in key roles.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        75. ResearchStudy.associatedParty.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        This element is affected by the following invariants: ele-1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        77. ResearchStudy.associatedParty.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        79. ResearchStudy.associatedParty.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        81. ResearchStudy.associatedParty.name
        Definition

        Name of associated party.

        ShortName of associated party
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        83. ResearchStudy.associatedParty.role
        Definition

        Type of association.

        Shortsponsor | lead-sponsor | sponsor-investigator | primary-investigator | collaborator | funding-source | general-contact | recruitment-contact | sub-investigator | study-director | study-chair
        Control1..1
        BindingUnless not suitable, these codes SHALL be taken from ResearchStudyPartyRole
        (extensible to http://hl7.org/fhir/ValueSet/research-study-party-role)

        desc.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        85. ResearchStudy.associatedParty.period
        Definition

        Identifies the start date and the end date of the associated party in the role.

        ShortWhen active in the role
        Comments

        The cardinality is 0..* due to the fact that an associated party may be intermittently active in a given role over multiple time periods.

        Control1..1
        TypePeriod
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        87. ResearchStudy.associatedParty.classifier
        Definition

        A categorization other than role for the associated party.

        Shortnih | fda | government | nonprofit | academic | industry
        Control0..*
        BindingFor example codes, see ResearchStudyPartyOrgType
        (example to http://hl7.org/fhir/ValueSet/research-study-party-organization-type)

        A characterization or type of the entity.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        89. ResearchStudy.associatedParty.party
        Definition

        Individual or organization associated with study (use practitionerRole to specify their organisation).

        ShortIndividual or organization associated with study (use practitionerRole to specify their organisation)
        Comments

        Suggestions of a better attribute name are appreciated

        Control1..1
        TypeReference(Practitioner)
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        91. ResearchStudy.progressStatus
        Definition

        Status of study with time for that status.

        ShortStatus of study with time for that status
        Control0..0
        TypeBackboneElement
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        99. ResearchStudy.whyStopped
        Definition

        A description and/or code explaining the premature termination of the study.

        Shortaccrual-goal-met | closed-due-to-toxicity | closed-due-to-lack-of-study-progress | temporarily-closed-per-study-design
        Control0..0
        BindingFor example codes, see ResearchStudyReasonStopped
        (example to http://hl7.org/fhir/ValueSet/research-study-reason-stopped)

        Codes for why the study ended prematurely.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        101. ResearchStudy.recruitment
        Definition

        Target or actual group of participants enrolled in study.

        ShortTarget or actual group of participants enrolled in study
        Control0..0
        TypeBackboneElement
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        110. ResearchStudy.comparisonGroup
        Definition

        Describes an expected event or sequence of events for one of the subjects of a study. E.g. for a living subject: exposure to drug A, wash-out, exposure to drug B, wash-out, follow-up. E.g. for a stability study: {store sample from lot A at 25 degrees for 1 month}, {store sample from lot A at 40 degrees for 1 month}.

        ShortDefined path through the study for a subject
        Comments

        In many clinical trials this is refered to as the ARM of the study, but such a term is not used in other sorts of trials even when there is a comparison between two or more groups.

        Control0..0
        TypeBackboneElement
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Alternate Namesarm
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        121. ResearchStudy.objective
        Definition

        A goal that the study is aiming to achieve in terms of a scientific question to be answered by the analysis of data collected during the study.

        ShortA goal for the study
        Control0..0
        TypeBackboneElement
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        129. ResearchStudy.outcomeMeasure
        Definition

        An "outcome measure", "endpoint", "effect measure" or "measure of effect" is a specific measurement or observation used to quantify the effect of experimental variables on the participants in a study, or for observational studies, to describe patterns of diseases or traits or associations with exposures, risk factors or treatment.

        ShortA variable measured during the study
        Comments

        A study may have multiple distinct outcome measures that can be used to assess the overall goal for a study. The goal of a study is in the objective whereas the metric by which the goal is assessed is the outcomeMeasure. Examples: Time to Local Recurrence (TLR), Disease-free Survival (DFS), 30 Day Mortality, Systolic BP

        Control0..0
        TypeBackboneElement
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        138. ResearchStudy.result
        Definition

        Link to one or more sets of results generated by the study. Could also link to a research registry holding the results such as ClinicalTrials.gov.

        ShortLink to results generated during the study
        Control0..0
        TypeReference(EvidenceReport, Citation, DiagnosticReport)
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))