eHealth Infrastructure
3.3.0 - ci-build Denmark flag

eHealth Infrastructure, published by Den telemedicinske infrastruktur (eHealth Infrastructure). This guide is not an authorized publication; it is the continuous build for version 3.3.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/fut-infrastructure/implementation-guide/ and changes regularly. See the Directory of published versions

Resource Profile: ehealth-consent - Detailed Descriptions

Active as of 2024-10-16

Definitions for the ehealth-consent resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Consent
2. Consent.category
BindingThe codes SHALL be taken from Consent Category
(required to http://ehealth.sundhed.dk/vs/consent-category)
4. Consent.patient
Control1..?
TypeReference(ehealth-patient)referenced
6. Consent.organization
TypeReference(ehealth-organization)referenced
8. Consent.source[x]
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
SlicingThis element introduces a set of slices on Consent.source[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
  • 10. Consent.source[x]:sourceReference
    Slice NamesourceReference
    Control0..1
    TypeReference(ehealth-consent, ehealth-documentreference, Contract, ehealth-questionnaireresponse)
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]

    Guidance on how to interpret the contents of this table can be found here

    0. Consent
    Definition

    A record of a healthcare consumer’s choices, which permits or denies identified recipient(s) or recipient role(s) to perform one or more actions within a given policy context, for specific purposes and periods of time.

    ShortA healthcare consumer's choices to permit or deny recipients or roles to perform actions for specific purposes and periods of time
    Comments

    Broadly, there are 3 key areas of consent for patients: Consent around sharing information (aka Privacy Consent Directive - Authorization to Collect, Use, or Disclose information), consent for specific treatment, or kinds of treatment, and general advance care directives.

    Control0..*
    Is Modifierfalse
    Summaryfalse
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    ppc-1: Either a Policy or PolicyRule (policy.exists() or policyRule.exists())
    ppc-2: IF Scope=privacy, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not())
    ppc-3: IF Scope=research, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='research').exists().not())
    ppc-4: IF Scope=adr, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='adr').exists().not())
    ppc-5: IF Scope=treatment, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not())
    ppc-1: Either a Policy or PolicyRule (policy.exists() or policyRule.exists())
    ppc-2: IF Scope=privacy, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not())
    ppc-3: IF Scope=research, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='research').exists().not())
    ppc-4: IF Scope=adr, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='adr').exists().not())
    ppc-5: IF Scope=treatment, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not())
    2. Consent.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. Consent.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    6. Consent.status
    Definition

    Indicates the current state of this consent.

    Shortdraft | proposed | active | rejected | inactive | entered-in-error
    Comments

    This element is labeled as a modifier because the status contains the codes rejected and entered-in-error that mark the Consent as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from ConsentStatehttp://hl7.org/fhir/ValueSet/consent-state-codes|4.0.1
    (required to http://hl7.org/fhir/ValueSet/consent-state-codes|4.0.1)

    Indicates the state of the consent.

    Typecode
    Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    The Consent Directive that is pointed to might be in various lifecycle states, e.g., a revoked Consent Directive.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. Consent.scope
    Definition

    A selector of the type of consent being presented: ADR, Privacy, Treatment, Research. This list is now extensible.

    ShortWhich of the four areas this resource covers (extensible)
    Control1..1
    BindingUnless not suitable, these codes SHALL be taken from ConsentScopeCodeshttp://hl7.org/fhir/ValueSet/consent-scope
    (extensible to http://hl7.org/fhir/ValueSet/consent-scope)

    The four anticipated uses for the Consent Resource.

    TypeCodeableConcept
    Is Modifiertrue because Allows changes to codes based on scope selection
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Consent.category
    Definition

    A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements.

    ShortClassification of the consent statement - for indexing/retrieval
    Control1..*
    BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from Consent Categoryhttp://hl7.org/fhir/ValueSet/consent-category
    (required to http://ehealth.sundhed.dk/vs/consent-category)
    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Consent.patient
    Definition

    The patient/healthcare consumer to whom this consent applies.

    ShortWho the consent applies to
    Comments

    Commonly, the patient the consent pertains to is the author, but for young and old people, it may be some other person.

    Control10..1
    TypeReference(ehealth-patient, Patient)referenced
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. Consent.organization
    Definition

    The organization that manages the consent, and the framework within which it is executed.

    ShortCustodian of the consent
    Control0..*
    TypeReference(ehealth-organization, Organization)referenced
    Is Modifierfalse
    Summarytrue
    Alternate Namescustodian
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Consent.source[x]
    Definition

    The source on which this consent statement is based. The source might be a scanned original paper form, or a reference to a consent that links back to such a source, a reference to a document repository (e.g. XDS) that stores the original consent document.

    ShortSource from which this consent is taken
    Comments

    The source can be contained inline (Attachment), referenced directly (Consent), referenced in a consent repository (DocumentReference), or simply by an identifier (Identifier), e.g. a CDA document id.

    Control0..1
    TypeChoice of: Attachment, Reference(Consent, DocumentReference, Contract, QuestionnaireResponse)
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Consent.source[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • type @ $this
    • 18. Consent.source[x]:sourceReference
      Slice NamesourceReference
      Definition

      The source on which this consent statement is based. The source might be a scanned original paper form, or a reference to a consent that links back to such a source, a reference to a document repository (e.g. XDS) that stores the original consent document.

      ShortSource from which this consent is taken
      Comments

      The source can be contained inline (Attachment), referenced directly (Consent), referenced in a consent repository (DocumentReference), or simply by an identifier (Identifier), e.g. a CDA document id.

      Control0..1
      TypeReference(ehealth-consent, ehealth-documentreference, Contract, ehealth-questionnaireresponse, Consent, DocumentReference, QuestionnaireResponse), Attachment
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be found here

      0. Consent
      Definition

      A record of a healthcare consumer’s choices, which permits or denies identified recipient(s) or recipient role(s) to perform one or more actions within a given policy context, for specific purposes and periods of time.

      ShortA healthcare consumer's choices to permit or deny recipients or roles to perform actions for specific purposes and periods of time
      Comments

      Broadly, there are 3 key areas of consent for patients: Consent around sharing information (aka Privacy Consent Directive - Authorization to Collect, Use, or Disclose information), consent for specific treatment, or kinds of treatment, and general advance care directives.

      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      ppc-1: Either a Policy or PolicyRule (policy.exists() or policyRule.exists())
      ppc-2: IF Scope=privacy, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not())
      ppc-3: IF Scope=research, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='research').exists().not())
      ppc-4: IF Scope=adr, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='adr').exists().not())
      ppc-5: IF Scope=treatment, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not())
      2. Consent.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. Consent.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. Consent.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. Consent.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages)

      A human language.

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. Consent.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      TypeNarrative
      Is Modifierfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. Consent.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

      Control0..*
      TypeResource
      Is Modifierfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. Consent.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      16. Consent.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      18. Consent.identifier
      Definition

      Unique identifier for this copy of the Consent Statement.

      ShortIdentifier for this record (external references)
      Comments

      This identifier identifies this copy of the consent. Where this identifier is also used elsewhere as the identifier for a consent record (e.g. a CDA consent document) then the consent details are expected to be the same.

      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      TypeIdentifier
      Is Modifierfalse
      Summarytrue
      Example<br/><b>General</b>:{ "system" : "http://acme.org/identifier/local/eCMS", "value" : "Local eCMS identifier" }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Consent.status
      Definition

      Indicates the current state of this consent.

      Shortdraft | proposed | active | rejected | inactive | entered-in-error
      Comments

      This element is labeled as a modifier because the status contains the codes rejected and entered-in-error that mark the Consent as not currently valid.

      Control1..1
      BindingThe codes SHALL be taken from ConsentState
      (required to http://hl7.org/fhir/ValueSet/consent-state-codes|4.0.1)

      Indicates the state of the consent.

      Typecode
      Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      The Consent Directive that is pointed to might be in various lifecycle states, e.g., a revoked Consent Directive.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Consent.scope
      Definition

      A selector of the type of consent being presented: ADR, Privacy, Treatment, Research. This list is now extensible.

      ShortWhich of the four areas this resource covers (extensible)
      Control1..1
      BindingUnless not suitable, these codes SHALL be taken from ConsentScopeCodes
      (extensible to http://hl7.org/fhir/ValueSet/consent-scope)

      The four anticipated uses for the Consent Resource.

      TypeCodeableConcept
      Is Modifiertrue because Allows changes to codes based on scope selection
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Consent.category
      Definition

      A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements.

      ShortClassification of the consent statement - for indexing/retrieval
      Control1..*
      BindingThe codes SHALL be taken from Consent Category
      (required to http://ehealth.sundhed.dk/vs/consent-category)
      TypeCodeableConcept
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. Consent.patient
      Definition

      The patient/healthcare consumer to whom this consent applies.

      ShortWho the consent applies to
      Comments

      Commonly, the patient the consent pertains to is the author, but for young and old people, it may be some other person.

      Control1..1
      TypeReference(ehealth-patient)referenced
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. Consent.dateTime
      Definition

      When this Consent was issued / created / indexed.

      ShortWhen this Consent was created or indexed
      Comments

      This is not the time of the original consent, but the time that this statement was made or derived.

      Control0..1
      TypedateTime
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. Consent.performer
      Definition

      Either the Grantor, which is the entity responsible for granting the rights listed in a Consent Directive or the Grantee, which is the entity responsible for complying with the Consent Directive, including any obligations or limitations on authorizations and enforcement of prohibitions.

      ShortWho is agreeing to the policy and rules
      Comments

      Commonly, the patient the consent pertains to is the consentor, but particularly for young and old people, it may be some other person - e.g. a legal guardian.

      Control0..*
      TypeReference(Organization, Patient, Practitioner, RelatedPerson, PractitionerRole)
      Is Modifierfalse
      Summarytrue
      Alternate Namesconsentor
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      32. Consent.organization
      Definition

      The organization that manages the consent, and the framework within which it is executed.

      ShortCustodian of the consent
      Control0..*
      TypeReference(ehealth-organization)referenced
      Is Modifierfalse
      Summarytrue
      Alternate Namescustodian
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. Consent.source[x]
      Definition

      The source on which this consent statement is based. The source might be a scanned original paper form, or a reference to a consent that links back to such a source, a reference to a document repository (e.g. XDS) that stores the original consent document.

      ShortSource from which this consent is taken
      Comments

      The source can be contained inline (Attachment), referenced directly (Consent), referenced in a consent repository (DocumentReference), or simply by an identifier (Identifier), e.g. a CDA document id.

      Control0..1
      TypeChoice of: Attachment, Reference(Consent, DocumentReference, Contract, QuestionnaireResponse)
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Consent.source[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • type @ $this
      • 36. Consent.source[x]:sourceReference
        Slice NamesourceReference
        Definition

        The source on which this consent statement is based. The source might be a scanned original paper form, or a reference to a consent that links back to such a source, a reference to a document repository (e.g. XDS) that stores the original consent document.

        ShortSource from which this consent is taken
        Comments

        The source can be contained inline (Attachment), referenced directly (Consent), referenced in a consent repository (DocumentReference), or simply by an identifier (Identifier), e.g. a CDA document id.

        Control0..1
        TypeReference(ehealth-consent, ehealth-documentreference, Contract, ehealth-questionnaireresponse)
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        38. Consent.policy
        Definition

        The references to the policies that are included in this consent scope. Policies may be organizational, but are often defined jurisdictionally, or in law.

        ShortPolicies covered by this consent
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. Consent.policy.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        42. Consent.policy.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        44. Consent.policy.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        46. Consent.policy.authority
        Definition

        Entity or Organization having regulatory jurisdiction or accountability for enforcing policies pertaining to Consent Directives.

        ShortEnforcement source for policy
        Control0..1
        This element is affected by the following invariants: ppc-1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        48. Consent.policy.uri
        Definition

        The references to the policies that are included in this consent scope. Policies may be organizational, but are often defined jurisdictionally, or in law.

        ShortSpecific policy covered by this consent
        Comments

        This element is for discoverability / documentation and does not modify or qualify the policy rules.

        Control0..1
        This element is affected by the following invariants: ppc-1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        50. Consent.policyRule
        Definition

        A reference to the specific base computable regulation or policy.

        ShortRegulation that this consents to
        Comments

        If the policyRule is absent, computable consent would need to be constructed from the elements of the Consent resource.

        Control0..1
        This element is affected by the following invariants: ppc-1
        BindingUnless not suitable, these codes SHALL be taken from ConsentPolicyRuleCodes
        (extensible to http://hl7.org/fhir/ValueSet/consent-policy)

        Regulatory policy examples.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Requirements

        Might be a unique identifier of a policy set in XACML, or other rules engine.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        52. Consent.verification
        Definition

        Whether a treatment instruction (e.g. artificial respiration yes or no) was verified with the patient, his/her family or another authorized person.

        ShortConsent Verified by patient or family
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        54. Consent.verification.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        56. Consent.verification.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        58. Consent.verification.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        60. Consent.verification.verified
        Definition

        Has the instruction been verified.

        ShortHas been verified
        Control1..1
        Typeboolean
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        62. Consent.verification.verifiedWith
        Definition

        Who verified the instruction (Patient, Relative or other Authorized Person).

        ShortPerson who verified
        Control0..1
        TypeReference(Patient, RelatedPerson)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        64. Consent.verification.verificationDate
        Definition

        Date verification was collected.

        ShortWhen consent verified
        Control0..1
        TypedateTime
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        66. Consent.provision
        Definition

        An exception to the base policy of this consent. An exception can be an addition or removal of access permissions.

        ShortConstraints to the base Consent.policyRule
        Control0..1
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        68. Consent.provision.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        70. Consent.provision.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        72. Consent.provision.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        74. Consent.provision.type
        Definition

        Action to take - permit or deny - when the rule conditions are met. Not permitted in root rule, required in all nested rules.

        Shortdeny | permit
        Control0..1
        BindingThe codes SHALL be taken from ConsentProvisionType
        (required to http://hl7.org/fhir/ValueSet/consent-provision-type|4.0.1)

        How a rule statement is applied, such as adding additional consent or removing consent.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        76. Consent.provision.period
        Definition

        The timeframe in this rule is valid.

        ShortTimeframe for this rule
        Control0..1
        TypePeriod
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        78. Consent.provision.actor
        Definition

        Who or what is controlled by this rule. Use group to identify a set of actors by some property they share (e.g. 'admitting officers').

        ShortWho|what controlled by this rule (or group, by role)
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Meaning if MissingThere is no specific actor associated with the exception
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        80. Consent.provision.actor.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        82. Consent.provision.actor.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        84. Consent.provision.actor.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        86. Consent.provision.actor.role
        Definition

        How the individual is involved in the resources content that is described in the exception.

        ShortHow the actor is involved
        Control1..1
        BindingUnless not suitable, these codes SHALL be taken from SecurityRoleType
        (extensible to http://hl7.org/fhir/ValueSet/security-role-type)

        How an actor is involved in the consent considerations.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        88. Consent.provision.actor.reference
        Definition

        The resource that identifies the actor. To identify actors by type, use group to identify a set of actors by some property they share (e.g. 'admitting officers').

        ShortResource for the actor (or group, by role)
        Control1..1
        TypeReference(Device, Group, CareTeam, Organization, Patient, Practitioner, RelatedPerson, PractitionerRole)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        90. Consent.provision.action
        Definition

        Actions controlled by this Rule.

        ShortActions controlled by this rule
        Comments

        Note that this is the direct action (not the grounds for the action covered in the purpose element). At present, the only action in the understood and tested scope of this resource is 'read'.

        Control0..*
        BindingFor example codes, see ConsentActionCodes
        (example to http://hl7.org/fhir/ValueSet/consent-action)

        Detailed codes for the consent action.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Meaning if Missingall actions
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        92. Consent.provision.securityLabel
        Definition

        A security label, comprised of 0..* security label fields (Privacy tags), which define which resources are controlled by this exception.

        ShortSecurity Labels that define affected resources
        Comments

        If the consent specifies a security label of "R" then it applies to all resources that are labeled "R" or lower. E.g. for Confidentiality, it's a high water mark. For other kinds of security labels, subsumption logic applies. When the purpose of use tag is on the data, access request purpose of use shall not conflict.

        Control0..*
        BindingUnless not suitable, these codes SHALL be taken from All Security Labels
        (extensible to http://hl7.org/fhir/ValueSet/security-labels)

        Security Labels from the Healthcare Privacy and Security Classification System.

        TypeCoding
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        94. Consent.provision.purpose
        Definition

        The context of the activities a user is taking - why the user is accessing the data - that are controlled by this rule.

        ShortContext of activities covered by this rule
        Comments

        When the purpose of use tag is on the data, access request purpose of use shall not conflict.

        Control0..*
        BindingUnless not suitable, these codes SHALL be taken from PurposeOfUse
        (extensible to http://terminology.hl7.org/ValueSet/v3-PurposeOfUse)

        What purposes of use are controlled by this exception. If more than one label is specified, operations must have all the specified labels.

        TypeCoding
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        96. Consent.provision.class
        Definition

        The class of information covered by this rule. The type can be a FHIR resource type, a profile on a type, or a CDA document, or some other type that indicates what sort of information the consent relates to.

        Shorte.g. Resource Type, Profile, CDA, etc.
        Comments

        Multiple types are or'ed together. The intention of the contentType element is that the codes refer to profiles or document types defined in a standard or an implementation guide somewhere.

        Control0..*
        BindingUnless not suitable, these codes SHALL be taken from ConsentContentClass
        (extensible to http://hl7.org/fhir/ValueSet/consent-content-class)

        The class (type) of information a consent rule covers.

        TypeCoding
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        98. Consent.provision.code
        Definition

        If this code is found in an instance, then the rule applies.

        Shorte.g. LOINC or SNOMED CT code, etc. in the content
        Comments

        Typical use of this is a Document code with class = CDA.

        Control0..*
        BindingFor example codes, see ConsentContentCodes
        (example to http://hl7.org/fhir/ValueSet/consent-content-code)

        If this code is found in an instance, then the exception applies.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        100. Consent.provision.dataPeriod
        Definition

        Clinical or Operational Relevant period of time that bounds the data controlled by this rule.

        ShortTimeframe for data controlled by this rule
        Comments

        This has a different sense to the Consent.period - that is when the consent agreement holds. This is the time period of the data that is controlled by the agreement.

        Control0..1
        TypePeriod
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        102. Consent.provision.data
        Definition

        The resources controlled by this rule if specific resources are referenced.

        ShortData controlled by this rule
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summarytrue
        Meaning if Missingall data
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        104. Consent.provision.data.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        106. Consent.provision.data.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        108. Consent.provision.data.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        110. Consent.provision.data.meaning
        Definition

        How the resource reference is interpreted when testing consent restrictions.

        Shortinstance | related | dependents | authoredby
        Control1..1
        BindingThe codes SHALL be taken from ConsentDataMeaning
        (required to http://hl7.org/fhir/ValueSet/consent-data-meaning|4.0.1)

        How a resource reference is interpreted when testing consent restrictions.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        112. Consent.provision.data.reference
        Definition

        A reference to a specific resource that defines which resources are covered by this consent.

        ShortThe actual data reference
        Control1..1
        TypeReference(Resource)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        114. Consent.provision.provision
        Definition

        Rules which provide exceptions to the base rule or subrules.

        ShortNested Exception Rules
        Control0..*
        TypeSeettp://hl7.org/fhir/StructureDefinition/Consent#Consent.provision
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))