define "Initial Population":
  exists "Qualifying Encounter During Day Of Measurement Period" QualifyingEncounter
    where "AgeInYearsAt"(date from start of QualifyingEncounter.period) >= 18

define "Initial Population":
  exists "Qualifying Encounter During Day Of Measurement Period" QualifyingEncounter
    where "AgeInYearsAt"(date from start of QualifyingEncounter.period) >= 18

define "Denominator":
  "Initial Population"

define "Denominator Exclusions":
  Hospice."Has Hospice Services"
    or PalliativeCare."Has Palliative Care in the Measurement Period"
    or exists "Is Pregnant During Day Of Measurement Period"

define "Numerator":
  exists "High BMI And Follow Up Provided"
    or exists "Low BMI And Follow Up Provided"
    or "Has Normal BMI"

define "Denominator Exceptions":
  exists "Medical Reason For Not Documenting A Follow Up Plan For Low Or High BMI"
    or exists "Medical Reason Or Patient Reason For Not Performing BMI Exam"

define "Has Hospice Services":
  exists ((([Encounter: "Encounter Inpatient"]).isEncounterPerformed()) InpatientEncounter
      where (InpatientEncounter.hospitalization.dischargeDisposition ~ "Discharge to home for hospice care (procedure)"
          or InpatientEncounter.hospitalization.dischargeDisposition ~ "Discharge to healthcare facility for hospice care (procedure)"
      )
        and InpatientEncounter.period.toInterval() ends during day of "Measurement Period"
  )
    or exists ((([Encounter: "Hospice Encounter"]).isEncounterPerformed()) HospiceEncounter
        where HospiceEncounter.period.toInterval() overlaps day of "Measurement Period"
    )
    or exists ((([ObservationScreeningAssessment: "Hospice care [Minimum Data Set]"]).isAssessmentPerformed()) HospiceAssessment
        where HospiceAssessment.value ~ "Yes (qualifier value)"
          and HospiceAssessment.effective.toInterval() overlaps day of "Measurement Period"
    )
    or exists ((([ServiceRequest: "Hospice Care Ambulatory"]).isInterventionOrder()) HospiceOrder
        where HospiceOrder.authoredOn.toInterval() during day of "Measurement Period"
    )
    or exists ((([Procedure: "Hospice Care Ambulatory"]).isInterventionPerformed()) HospicePerformed
        where HospicePerformed.performed.toInterval() overlaps day of "Measurement Period"
    )
    or exists ((([ConditionProblemsHealthConcerns: "Hospice Diagnosis"])
        union ([ConditionEncounterDiagnosis: "Hospice Diagnosis"])) HospiceCareDiagnosis
        where HospiceCareDiagnosis.prevalenceInterval() overlaps day of "Measurement Period"
    )

define "Has Palliative Care in the Measurement Period":
  exists ((([ObservationScreeningAssessment: "Functional Assessment of Chronic Illness Therapy - Palliative Care Questionnaire (FACIT-Pal)"]).isAssessmentPerformed()) PalliativeAssessment
      where PalliativeAssessment.effective.toInterval() overlaps day of "Measurement Period"
  )
    or exists ((([ConditionProblemsHealthConcerns: "Palliative Care Diagnosis"])
    union ([ConditionEncounterDiagnosis: "Palliative Care Diagnosis"])) PalliativeDiagnosis
        where PalliativeDiagnosis.prevalenceInterval() overlaps day of "Measurement Period"
    )
    or exists ((([Encounter: "Palliative Care Encounter"]).isEncounterPerformed()) PalliativeEncounter
        where PalliativeEncounter.period.toInterval() overlaps day of "Measurement Period"
    )
    or exists ((([Procedure: "Palliative Care Intervention"]).isInterventionPerformed()) PalliativeIntervention
        where PalliativeIntervention.performed.toInterval() overlaps day of "Measurement Period"
    )

define "SDE Sex":
  case
    when Patient.sex = '248153007' then "Male (finding)"
    when Patient.sex = '248152002' then "Female (finding)"
    else null
  end

define "SDE Payer":
  [Coverage: type in "Payer Type"] Payer
    return {
      code: Payer.type,
      period: Payer.period
    }

define "SDE Ethnicity":
  Patient.ethnicity E
    return Tuple {
      codes: { E.ombCategory } union E.detailed,
      display: E.text
    }

define "SDE Race":
  Patient.race R
    return Tuple {
      codes: R.ombCategory union R.detailed,
      display: R.text
    }

define "SDE Sex":
  SDE."SDE Sex"

define "BMI During Measurement Period":
  [USCoreBMIProfile] BMI
    where BMI.value > 0 'kg/m2'
      and BMI.status in { 'final', 'amended', 'corrected' }
      and BMI.effective.toInterval ( ) during day of "Measurement Period"

define "Documented High BMI During Measurement Period":
  "BMI During Measurement Period" BMI
    where BMI.effective.toInterval ( ) during day of "Measurement Period"
      and BMI.value >= 25 'kg/m2'

define "High BMI Interventions Ordered":
  ( ( [ServiceRequest: "Follow Up for Above Normal BMI"]
      union [ServiceRequest: "Referrals Where Weight Assessment May Occur"]
      union [MedicationRequest: "Medications for Above Normal BMI"] ) HighInterventionsOrdered
      where HighInterventionsOrdered.reasonCode in "Overweight or Obese"
        or ( exists [ConditionProblemsHealthConcerns: "Overweight or Obese"] OverweightObese
            where ( OverweightObese.isProblemListItem ( )
                or OverweightObese.isHealthConcern ( )
            )
              and OverweightObese.isActive ( )
              and OverweightObese.prevalenceInterval ( ) starts before or on day of HighInterventionsOrdered.authoredOn
        )
  )

define "High BMI Interventions Performed":
  ( [Procedure: "Follow Up for Above Normal BMI"] HighInterventionsPerformed
      where HighInterventionsPerformed.reasonCode in "Overweight or Obese"
        or ( exists [ConditionProblemsHealthConcerns: "Overweight or Obese"] OverweightObese
            where OverweightObese.prevalenceInterval ( ) starts before or on day of start of HighInterventionsPerformed.performed.toInterval ( )
              and not ( OverweightObese.prevalenceInterval ( ) ends before day of start of HighInterventionsPerformed.performed.toInterval ( ) )
        )
  )

define "High BMI And Follow Up Provided":
  "Documented High BMI During Measurement Period" HighBMI
    with ( "High BMI Interventions Ordered"
      union "High BMI Interventions Performed" ) HighBMIInterventions
      such that Coalesce(HighBMIInterventions.performed.toInterval(), HighBMIInterventions.authoredOn.toInterval()) starts during day of "Measurement Period"

define "Documented Low BMI During Measurement Period":
  "BMI During Measurement Period" BMI
    where BMI.effective.toInterval ( ) during day of "Measurement Period"
      and BMI.value < 18.5 'kg/m2'

define "Low BMI Interventions Ordered":
  ( ( [ServiceRequest: "Follow Up for Below Normal BMI"]
      union [ServiceRequest: "Referrals Where Weight Assessment May Occur"]
      union [MedicationRequest: "Medications for Below Normal BMI"] ) LowInterventionsOrdered
      where LowInterventionsOrdered.reasonCode in "Underweight"
        or ( exists [ConditionProblemsHealthConcerns: "Underweight"] UnderweightDiagnosis
            where ( UnderweightDiagnosis.isHealthConcern ( ) )
              and UnderweightDiagnosis.isActive ( )
              and UnderweightDiagnosis.prevalenceInterval ( ) starts before or on day of LowInterventionsOrdered.authoredOn
              and LowInterventionsOrdered.authoredOn during day of "Measurement Period"
        )
  )

define "Low BMI Interventions Performed":
  ( [Procedure: "Follow Up for Below Normal BMI"] LowInterventionsPerformed
      where LowInterventionsPerformed.reasonCode in "Underweight"
        and LowInterventionsPerformed.status = 'completed'
        or ( exists [ConditionProblemsHealthConcerns: "Underweight"] UnderweightDiagnosis
            where ( UnderweightDiagnosis.isHealthConcern ( ) )
              and UnderweightDiagnosis.isActive ( )
              and UnderweightDiagnosis.prevalenceInterval ( ) starts before or on day of start of LowInterventionsPerformed.performed.toInterval ( )
              and LowInterventionsPerformed.performed.toInterval ( ) during day of "Measurement Period"
              and not ( UnderweightDiagnosis.prevalenceInterval ( ) ends before day of start of LowInterventionsPerformed.performed.toInterval ( ) )
        )
  )

define "Low BMI And Follow Up Provided":
  ( "Documented Low BMI During Measurement Period" LowBMI
      with ( "Low BMI Interventions Ordered"
        union "Low BMI Interventions Performed" ) LowBMIInterventions
        such that Coalesce(LowBMIInterventions.performed.toInterval(), LowBMIInterventions.authoredOn.toInterval()) starts during day of "Measurement Period"
  )

define "Has Normal BMI":
  exists ( "BMI During Measurement Period" BMI
      where BMI.value >= 18.5 'kg/m2'
        and BMI.value < 25 'kg/m2'
  )
    and not ( exists "Documented High BMI During Measurement Period"
        or exists "Documented Low BMI During Measurement Period"
    )

define "Numerator":
  exists "High BMI And Follow Up Provided"
    or exists "Low BMI And Follow Up Provided"
    or "Has Normal BMI"

define "Qualifying Encounter During Day Of Measurement Period":
  [Encounter: type in "Encounter to Evaluate BMI"] BMIEncounter
    where BMIEncounter.period during day of "Measurement Period"
      and BMIEncounter.class !~ "virtual"
      and BMIEncounter.status = 'finished'

define "Initial Population":
  exists "Qualifying Encounter During Day Of Measurement Period" QualifyingEncounter
    where "AgeInYearsAt"(date from start of QualifyingEncounter.period) >= 18

define "Denominator":
  "Initial Population"

define "SDE Payer":
  SDE."SDE Payer"

define "Initial Population":
  exists "Qualifying Encounter During Day Of Measurement Period" QualifyingEncounter
    where "AgeInYearsAt"(date from start of QualifyingEncounter.period) >= 18

define "SDE Ethnicity":
  SDE."SDE Ethnicity"

define "Is Pregnant During Day Of Measurement Period":
  ( [ConditionProblemsHealthConcerns: "Pregnancy or Other Related Diagnoses"]
    union [ConditionEncounterDiagnosis: "Pregnancy or Other Related Diagnoses"] ) PregnancyDiagnosis
    with "Qualifying Encounter During Day Of Measurement Period" QualifyingEncounter
      such that PregnancyDiagnosis.clinicalStatus ~ QICoreCommon."active"
        and PregnancyDiagnosis.prevalenceInterval ( ) overlaps day of "Measurement Period"

define "Denominator Exclusions":
  Hospice."Has Hospice Services"
    or PalliativeCare."Has Palliative Care in the Measurement Period"
    or exists "Is Pregnant During Day Of Measurement Period"

define "SDE Race":
  SDE."SDE Race"

define "Medical Reason For Not Documenting A Follow Up Plan For Low Or High BMI":
  ( ( [ServiceNotRequested: "Referrals Where Weight Assessment May Occur"]
      union [ServiceNotRequested: "Follow Up for Above Normal BMI"]
      union [ServiceNotRequested: "Follow Up for Below Normal BMI"] ) NoBMIFollowUp
      with "Qualifying Encounter During Day Of Measurement Period" QualifyingEncounter
        such that NoBMIFollowUp.authoredOn same day as start of QualifyingEncounter.period
      where NoBMIFollowUp.status ~ 'completed'
        and NoBMIFollowUp.reasonRefused in "Medical Reason"
  )
    union ( ( [MedicationNotRequested: "Medications for Above Normal BMI"]
        union [MedicationNotRequested: "Medications for Below Normal BMI"] ) NoBMIFollowUp
        with "Qualifying Encounter During Day Of Measurement Period" QualifyingEncounter
          such that NoBMIFollowUp.authoredOn same day as start of QualifyingEncounter.period
        where NoBMIFollowUp.status ~ 'completed'
          // TODO: https://oncprojectracking.healthit.gov/support/projects/MADIE/issues/MADIE-2124
          // Expecting 4 failures until this translator issue is incorporated into MADiE
          
          
          and NoBMIFollowUp.reasonCode in "Medical Reason"
    )

define "Medical Reason Or Patient Reason For Not Performing BMI Exam":
  [ObservationCancelled: code = "Body mass index (BMI) [Ratio]"] NoBMI
    with "Qualifying Encounter During Day Of Measurement Period" QualifyingEncounter
      such that NoBMI.effective.toInterval ( ) ends same day as start of QualifyingEncounter.period
    where NoBMI.status = 'cancelled'
      and ( NoBMI.notDoneReason in "Patient Declined"
          or NoBMI.notDoneReason in "Medical Reason"
      )

define "Denominator Exceptions":
  exists "Medical Reason For Not Documenting A Follow Up Plan For Low Or High BMI"
    or exists "Medical Reason Or Patient Reason For Not Performing BMI Exam"

/*
@description: Returns true if the given condition is a problem list item.
*/
define fluent function isProblemListItem(condition Choice<"ConditionEncounterDiagnosis", "ConditionProblemsHealthConcerns">):
  exists (condition.category C
    where C ~ "problem-list-item"
  )

/*
@description: Returns true if the given condition is a health concern
*/
define fluent function isHealthConcern(condition Choice<"ConditionEncounterDiagnosis", "ConditionProblemsHealthConcerns">):
  exists (condition.category C
    where C ~ "health-concern"
  )

/* Candidates for FHIRCommon */

/*
@description: Returns true if the given condition has a clinical status of active, recurrence, or relapse
*/
define fluent function isActive(condition Choice<"ConditionEncounterDiagnosis", "ConditionProblemsHealthConcerns">):
  condition.clinicalStatus ~ "active"
    or condition.clinicalStatus ~ "recurrence"
    or condition.clinicalStatus ~ "relapse"

/*
@description: Returns an interval representing the normalized prevalence period of a given Condition.
@comment: Uses the ToInterval and ToAbatementInterval functions to determine the widest potential interval from
onset to abatement as specified in the given Condition. If the condition is active, or has an abatement date the resulting 
interval will have a closed ending boundary. Otherwise, the resulting interval will have an open ending boundary.
*/
define fluent function prevalenceInterval(condition Choice<"ConditionEncounterDiagnosis", "ConditionProblemsHealthConcerns">):
if condition.clinicalStatus ~ "active"
  or condition.clinicalStatus ~ "recurrence"
  or condition.clinicalStatus ~ "relapse" then
  Interval[start of condition.onset.toInterval(), end of condition.abatementInterval()]
else
    (end of condition.abatementInterval()) abatementDate
    return if abatementDate is null then
      Interval[start of condition.onset.toInterval(), abatementDate)
    else
      Interval[start of condition.onset.toInterval(), abatementDate]

/*
@description: Returns an interval representing the normalized abatement of a given Condition.
@comment: If the abatement element of the Condition is represented as a DateTime, the result
is an interval beginning and ending on that DateTime.
If the abatement is represented as a Quantity, the quantity is expected to be a calendar-duration and is interpreted as the age of the patient. The
result is an interval from the date the patient turned that age to immediately before one year later.
If the abatement is represented as a Quantity Interval, the quantities are expected to be calendar-durations and are interpreted as an age range during
which the abatement occurred. The result is an interval from the date the patient turned the starting age of the quantity interval, and ending immediately
before one year later than the date the patient turned the ending age of the quantity interval.
*/
define fluent function abatementInterval(condition Choice<"ConditionEncounterDiagnosis", "ConditionProblemsHealthConcerns">):
	if condition.abatement is DateTime then
	  Interval[condition.abatement as DateTime, condition.abatement as DateTime]
	else if condition.abatement is Quantity then
		Interval[Patient.birthDate + (condition.abatement as Quantity),
			Patient.birthDate + (condition.abatement as Quantity) + 1 year)
	else if condition.abatement is Interval<Quantity> then
	  Interval[Patient.birthDate + (condition.abatement.low as Quantity),
		  Patient.birthDate + (condition.abatement.high as Quantity) + 1 year)
	else if condition.abatement is Interval<DateTime> then
	  Interval[condition.abatement.low, condition.abatement.high)
	else null as Interval<DateTime>

/*
@description: Normalizes a value that is a choice of timing-valued types to an equivalent interval
@comment: Normalizes a choice type of DateTime, Quanitty, Interval<DateTime>, or Interval<Quantity> types
to an equivalent interval. This selection of choice types is a superset of the majority of choice types that are used as possible
representations for timing-valued elements in QICore, allowing this function to be used across any resource.
The input can be provided as a DateTime, Quantity, Interval<DateTime> or Interval<Quantity>.
The intent of this function is to provide a clear and concise mechanism to treat single
elements that have multiple possible representations as intervals so that logic doesn't have to account
for the variability. More complex calculations (such as medication request period or dispense period
calculation) need specific guidance and consideration. That guidance may make use of this function, but
the focus of this function is on single element calculations where the semantics are unambiguous.
If the input is a DateTime, the result a DateTime Interval beginning and ending on that DateTime.
If the input is a Quantity, the quantity is expected to be a calendar-duration interpreted as an Age,
and the result is a DateTime Interval beginning on the Date the patient turned that age and ending immediately before one year later.
If the input is a DateTime Interval, the result is the input.
If the input is a Quantity Interval, the quantities are expected to be calendar-durations interpreted as an Age, and the result
is a DateTime Interval beginning on the date the patient turned the age given as the start of the quantity interval, and ending
immediately before one year later than the date the patient turned the age given as the end of the quantity interval.
If the input is a Timing, an error will be thrown indicating that Timing calculations are not implemented. Any other input will reslt in a null DateTime Interval
*/
define fluent function toInterval(choice Choice<DateTime, Quantity, Interval<DateTime>, Interval<Quantity>, Timing>):
  case
	  when choice is DateTime then
    	Interval[choice as DateTime, choice as DateTime]
		when choice is Interval<DateTime> then
  		choice as Interval<DateTime>
		when choice is Quantity then
		  Interval[Patient.birthDate + (choice as Quantity),
			  Patient.birthDate + (choice as Quantity) + 1 year)
		when choice is Interval<Quantity> then
		  Interval[Patient.birthDate + (choice.low as Quantity),
			  Patient.birthDate + (choice.high as Quantity) + 1 year)
		when choice is Timing then
      Message(null, true, 'NOT_IMPLEMENTED', 'Error', 'Calculation of an interval from a Timing value is not supported') as Interval<DateTime>
		else
			null as Interval<DateTime>
	end

define function ToString(value uri): value.value

/*
@description: Converts the given FHIR [CodeableConcept](https://hl7.org/fhir/datatypes.html#CodeableConcept) value to a CQL Concept.
*/
define function ToConcept(concept FHIR.CodeableConcept):
    if concept is null then
        null
    else
        System.Concept {
            codes: concept.coding C return ToCode(C),
            display: concept.text.value
        }

/*
@description: Converts the given FHIR [Coding](https://hl7.org/fhir/datatypes.html#Coding) value to a CQL Code.
*/
define function ToCode(coding FHIR.Coding):
    if coding is null then
        null
    else
        System.Code {
          code: coding.code.value,
          system: coding.system.value,
          version: coding.version.value,
          display: coding.display.value
        }

/*
@description: Converts the given [Period](https://hl7.org/fhir/datatypes.html#Period)
value to a CQL DateTime Interval
@comment: If the start value of the given period is unspecified, the starting
boundary of the resulting interval will be open (meaning the start of the interval
is unknown, as opposed to interpreted as the beginning of time).
*/
define function ToInterval(period FHIR.Period):
    if period is null then
        null
    else
        if period."start" is null then
            Interval(period."start".value, period."end".value]
        else
            Interval[period."start".value, period."end".value]

//Encounter, Performed
//General usage unless required otherwise by measure intent (e.g., follow-up encounters)
define fluent function isEncounterPerformed(Enc List<Encounter>):
  Enc E
    where E.status in {'finished', 'arrived', 'triaged', 'in-progress', 'onleave'}

//This library contains functions used to constrain FHIR resource elements for measures authored by NCQA, based on QICore 6.0.0 resources including IG and authoring patterns. The functions may appear similar to some QICoreCommon functions but differ in that they have constraints that are relevant for measures authored by NCQA.

//Assessment, Performed
define fluent function isAssessmentPerformed(Obs List<ObservationScreeningAssessment>):
  Obs O
    where O.status in { 'final', 'amended', 'corrected' }

//Intervention, Order
define fluent function isInterventionOrder(ServiceRequest List<ServiceRequest>):
  ServiceRequest S
    where S.status in { 'active', 'completed' }
      and S.intent = 'order'

//Intervention, Performed
define fluent function isInterventionPerformed(Proc List<Procedure>):
  Proc P
    where P.status ~ 'completed'