Generated Narrative: StructureDefinition EHDSObservation

NameFlagsCard.TypeDescription & Constraintsdoco
.. EHDSObservation 0..*EHDSDataSetObservation model

Elements defined in Ancestors:header
Instances of this logical model can be the target of a Reference
... header
.... subject 1..1EHDSPatientPatient who is receiving health care. This patient might be different from the direct subject of the observation.
.... status 1..1CodeableConceptStatus of the resource or document
Binding Description: (preferred): HL7 Observation status
.... directSubject[x] 0..1The direct subject of the observation if different from the patient (subject of care), e.g. an observation of an implanted device
..... directSubjectEHDSPatientEHDSPatient
..... directSubjectEHDSPatientAnimalEHDSPatientAnimal
..... directSubjectEHDSLocationEHDSLocation
..... directSubjectEHDSDeviceEHDSDevice
..... directSubjectEHDSHealthProfessionalEHDSHealthProfessional
..... directSubjectEHDSOrganisationEHDSOrganisation
..... directSubjectEHDSProcedureEHDSProcedure
... observationDate[x] 1..1Clinically relevant time or time period for the observation
.... observationDateDateTimedateTime
.... observationDatePeriodPeriod
... type 1..1CodeableConceptObservation type. Code and name representing the type of the observation using the agreed code systems.
Binding Description: (preferred): LOINC, NPU, SNOMED CT
... originalName 0..1stringOriginal (conventional) name of the observation as used in the local laboratory or clinical system.
... method 0..1CodeableConceptObservation method
Binding Description: (preferred): SNOMED CT
... specimen 0..1EHDSSpecimenSpecimen used for this observation.
... order 0..1EHDSServiceRequestIdentifies order and order placer this observation belongs to
... performer[x] 0..*Performer of the observation. Some test could be performed by the patient himself or by a care giver. Those are in the scope of this deliverable under specified conditions.
.... performerEHDSOrganisationEHDSOrganisation
.... performerEHDSHealthProfessionalEHDSHealthProfessional
.... performerEHDSPatientEHDSPatient
.... performerEHDSRelatedPersonEHDSRelatedPerson
... bodySite 0..1EHDSBodyStructureAnatomic location and laterality where the observation was performed.
... result 1..1BaseResult of the observation including text, numeric, coded, and other types of results of the measurement and measurement uncertainty. Content of the observation result will vary according to the type of the observation.
.... value[x] 0..1Observation result value according to the type of observation. Model covers only most frequently used data types but other data types can be used as well. Text result value should be used only if coded result value is not expected otherwise use valueCodeableConcept.text. For Quantity, Range and Ratio, result units of the measurement should be provided.
Binding Description: (preferred): UCUM for units, SNOMED CT for coded results
..... valueStringstring
..... valueQuantityQuantity
..... valueRangeRange
..... valueRatioRatio
..... valueCodeableConceptCodeableConcept
.... uncertainty 0..1BaseMeasurement uncertainty type and interval if needed.
..... value 1..1decimalThe numerical value of the measurement uncertainty.
..... type 0..1CodingProbability Distribution Type for uncertainty
Binding Description: (preferred): HL7 ProbabilityDistributionType
.... dataAbsentReason 0..1CodeableConceptProvides a reason why the expected value in the element Observation.value[x] is missing.
Binding Description: (preferred): HL7 Data absent reason
... referenceRange 0..*BaseReference range, multiple reference ranges of different types could by provided. Provides guide for interpretation of the result.
.... low 0..1QuantityLow limit of the reference range.
Binding Description: (preferred): UCUM for units
.... high 0..1QuantityHigh limit of the reference range.
Binding Description: (preferred): UCUM for units
.... normalValue 0..1CodeableConceptNormal value, if relevant for the reference range.
Binding Description: (preferred): SNOMED CT
.... type 0..1CodeableConceptType of reference range.
Binding Description: (preferred): HL7 Observation Reference Range Meaning Codes
.... appliesTo 0..*CodeableConceptCodes to indicate the target population this reference range applies to.
Binding Description: (preferred): SNOMED CT, HL7 v3-Race
.... age 0..1RangeAge range to which this reference range applies if applicable.
Binding Description: (preferred): UCUM for units
.... text 0..1stringText based reference range in an observation.
... interpretation 0..*CodeableConceptInformation about reference intervals and result interpretation.
Binding Description: (preferred): SNOMED CT, HL7 ObservationInterpretation
... note 0..1stringComments and narrative representation of the observation result and findings.
... component 0..*BaseComponent in case the observation consists of multiple sub-observations (e.g. blood pressure).
.... code 1..1CodeableConceptCode representing the observation using the agreed code systems.
Binding Description: (preferred): LOINC, NPU, SNOMED CT
.... originalName 0..1stringOriginal (conventional) name of the observation as used in the local laboratory or clinical system.
.... result 1..1BaseResult of the observation including text, numeric, coded, and other types of results of the measurement and measurement uncertainty. Content of the observation result will vary according to the type of the observation.
..... value[x] 0..1Observation result value according to the type of observation. Model covers only most frequently used data types but other data types can be used as well. Text result value should be used only if coded result value is not expected otherwise use valueCodeableConcept.text. For Quantity, Range and Ratio, result units of the measurement should be provided.
Binding Description: (preferred): UCUM for units, SNOMED CT for coded results
...... valueStringstring
...... valueQuantityQuantity
...... valueRangeRange
...... valueRatioRatio
...... valueCodeableConceptCodeableConcept
..... uncertainty 0..1BaseMeasurement uncertainty type and interval if needed.
...... value 1..1decimalThe numerical value of the measurement uncertainty.
...... type 0..1CodingProbability Distribution Type for uncertainty
Binding Description: (preferred): HL7 ProbabilityDistributionType
..... dataAbsentReason 0..1CodeableConceptProvides a reason why the expected value in the element component.value[x] is missing.
Binding Description: (preferred): HL7 Data absent reason
.... referenceRange 0..*BaseReference range, multiple reference ranges of different types could by provided. Provides guide for interpretation of the result.
..... low 0..1QuantityLow limit of the reference range.
Binding Description: (preferred): UCUM for units
..... high 0..1QuantityHigh limit of the reference range.
Binding Description: (preferred): UCUM for units
..... normalValue 0..1CodeableConceptNormal value, if relevant for the reference range.
Binding Description: (preferred): SNOMED CT
..... type 0..1CodeableConceptType of reference range.
Binding Description: (preferred): HL7 Observation Reference Range Meaning Codes
..... appliesTo 0..*CodeableConceptCodes to indicate the target population this reference range applies to.
Binding Description: (preferred): SNOMED CT, HL7 v3-Race
..... age 0..1RangeAge range to which this reference range applies if applicable.
Binding Description: (preferred): UCUM for units
..... text 0..1stringText based reference range in an observation.
.... interpretation 0..*CodeableConceptInformation about reference intervals and result interpretation.
Binding Description: (preferred): SNOMED CT, HL7 ObservationInterpretation
... derivedFrom[x] 0..*Reference to the related resource from which the observation has been made. For example, a calculated anion gap or a fetal measurement based on an ultrasound image.
.... derivedFromEHDSObservationEHDSObservation
.... derivedFromEHDSLaboratoryObservationEHDSLaboratoryObservation
.... derivedFromEHDSImagingStudyEHDSImagingStudy
... hasMember[x] 0..*This observation is a group observation (e.g. a battery, a panel of tests, a set of vital sign measurements) that includes the target as a member of the group.
.... hasMemberEHDSLaboratoryObservationEHDSLaboratoryObservation
.... hasMemberEHDSObservationEHDSObservation

doco Documentation for this format
 <status value="draft"/> <date value="2026-02-05T13:46:24+00:00"/> <publisher value="Xt-EHR"/> <contact> <name value="Xt-EHR"/> <telecom> <system value="url"/> <value value="http://www.xt-ehr.eu/"/> </telecom> </contact> <description value="EHDS refined base model for Observation information"/> <fhirVersion value="5.0.0"/> <mapping> <identity value="rim"/> <uri value="http://hl7.org/v3"/> <name value="RIM Mapping"/> </mapping> <kind value="logical"/> <abstract value="false"/> <type value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSObservation"/> <baseDefinition value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSDataSet"/> <derivation value="specialization"/> <snapshot> <extension url="http://hl7.org/fhir/tools/StructureDefinition/snapshot-base-version"> <valueString value="0.2.1"/> </extension> <element id="EHDSObservation"> <path value="EHDSObservation"/> <short value="Observation model"/> <definition value="EHDS refined base model for Observation information"/> <min value="0"/> <max value="*"/> <base> <path value="Base"/> <min value="0"/> <max value="*"/> </base> <isModifier value="false"/> <mapping> <identity value="rim"/> <map value="n/a"/> </mapping> </element> <element id="EHDSObservation.header"> <path value="EHDSObservation.header"/> <short value="Basic metadata for this information"/> <definition value="Basic metadata for this information"/> <min value="1"/> <max value="1"/> <base> <path value="EHDSDataSet.header"/> <min value="1"/> <max value="1"/> </base> <type> <code value="Base"/> </type> </element> <element id="EHDSObservation.header.subject"> <path value="EHDSObservation.header.subject"/> <short value="Patient who is receiving health care. This patient might be different from the direct subject of the observation."/> <definition value="Patient/subject information"/> <min value="1"/> <max value="1"/> <base> <path value="EHDSDataSet.header.subject"/> <min value="1"/> <max value="1"/> </base> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSPatient"/> </type> </element> <element id="EHDSObservation.header.identifier"> <path value="EHDSObservation.header.identifier"/> <short value="Business identifier for the object, unique within its system. Supporting disambiguation between different contexts (systems/countries)."/> <definition value="Business identifier for the object, unique within its system. Supporting disambiguation between different contexts (systems/countries)."/> <min value="0"/> <max value="*"/> <base> <path value="EHDSDataSet.header.identifier"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Identifier"/> </type> </element> <element id="EHDSObservation.header.author[x]"> <path value="EHDSObservation.header.author[x]"/> <short value="Author(s) responsible for the provided information."/> <definition value="Author(s) responsible for the provided information. The exact role of the responsible author varies across use cases and is specific to individual models."/> <min value="0"/> <max value="*"/> <base> <path value="EHDSDataSet.header.author[x]"/> <min value="0"/> <max value="*"/> </base> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSHealthProfessional"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSOrganisation"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSDevice"/> </type> </element> <element id="EHDSObservation.header.date"> <path value="EHDSObservation.header.date"/> <short value="Date and optionally time of authoring/issuing"/> <definition value="Date and optionally time of authoring/issuing"/> <min value="0"/> <max value="1"/> <base> <path value="EHDSDataSet.header.date"/> <min value="0"/> <max value="1"/> </base> <type> <code value="dateTime"/> </type> </element> <element id="EHDSObservation.header.status"> <path value="EHDSObservation.header.status"/> <short value="Status of the resource or document"/> <definition value="Status of the resource or document"/> <min value="1"/> <max value="1"/> <base> <path value="EHDSDataSet.header.status"/> <min value="1"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="HL7 Observation status"/> </binding> </element> <element id="EHDSObservation.header.source"> <path value="EHDSObservation.header.source"/> <short value="Source of information (e.g. patient, patient's proxy). Used in case the patient has authored the information or the author has submitted patient-stated information."/> <definition value="Source of information (e.g. patient, patient's proxy). Used in case the patient has authored the information or the author has submitted patient-stated information."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSDataSet.header.source"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> </element> <element id="EHDSObservation.header.language"> <path value="EHDSObservation.header.language"/> <short value="Language in which the resource is written. Language is expressed by the IETF language tag."/> <definition value="Language in which the resource is written. Language is expressed by the IETF language tag."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSDataSet.header.language"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="BCP 47"/> </binding> </element> <element id="EHDSObservation.header.directSubject[x]"> <path value="EHDSObservation.header.directSubject[x]"/> <short value="The direct subject of the observation if different from the patient (subject of care), e.g. an observation of an implanted device"/> <definition value="The direct subject of the observation if different from the patient (subject of care), e.g. an observation of an implanted device"/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.header.directSubject[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSPatient"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSPatientAnimal"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSLocation"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSDevice"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSHealthProfessional"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSOrganisation"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSProcedure"/> </type> </element> <element id="EHDSObservation.observationDate[x]"> <path value="EHDSObservation.observationDate[x]"/> <short value="Clinically relevant time or time period for the observation"/> <definition value="Clinically relevant time or time period for the observation"/> <min value="1"/> <max value="1"/> <base> <path value="EHDSObservation.observationDate[x]"/> <min value="1"/> <max value="1"/> </base> <type> <code value="dateTime"/> </type> <type> <code value="Period"/> </type> </element> <element id="EHDSObservation.type"> <path value="EHDSObservation.type"/> <short value="Observation type. Code and name representing the type of the observation using the agreed code systems."/> <definition value="Observation type. Code and name representing the type of the observation using the agreed code systems."/> <min value="1"/> <max value="1"/> <base> <path value="EHDSObservation.type"/> <min value="1"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="LOINC, NPU, SNOMED CT"/> </binding> </element> <element id="EHDSObservation.originalName"> <path value="EHDSObservation.originalName"/> <short value="Original (conventional) name of the observation as used in the local laboratory or clinical system."/> <definition value="Original (conventional) name of the observation as used in the local laboratory or clinical system."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.originalName"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> </element> <element id="EHDSObservation.method"> <path value="EHDSObservation.method"/> <short value="Observation method"/> <definition value="Observation method (measurement principle) to obtain the result."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.method"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="SNOMED CT"/> </binding> </element> <element id="EHDSObservation.specimen"> <path value="EHDSObservation.specimen"/> <short value="Specimen used for this observation."/> <definition value="Specimen used for this observation."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.specimen"/> <min value="0"/> <max value="1"/> </base> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSSpecimen"/> </type> </element> <element id="EHDSObservation.order"> <path value="EHDSObservation.order"/> <short value="Identifies order and order placer this observation belongs to"/> <definition value="Identifies order and order placer this observation belongs to"/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.order"/> <min value="0"/> <max value="1"/> </base> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSServiceRequest"/> </type> </element> <element id="EHDSObservation.performer[x]"> <path value="EHDSObservation.performer[x]"/> <short value="Performer of the observation. Some test could be performed by the patient himself or by a care giver. Those are in the scope of this deliverable under specified conditions."/> <definition value="Performer of the observation. Some test could be performed by the patient himself or by a care giver. Those are in the scope of this deliverable under specified conditions."/> <min value="0"/> <max value="*"/> <base> <path value="EHDSObservation.performer[x]"/> <min value="0"/> <max value="*"/> </base> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSOrganisation"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSHealthProfessional"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSPatient"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSRelatedPerson"/> </type> </element> <element id="EHDSObservation.bodySite"> <path value="EHDSObservation.bodySite"/> <short value="Anatomic location and laterality where the observation was performed."/> <definition value="Anatomic location and laterality where the observation was performed."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.bodySite"/> <min value="0"/> <max value="1"/> </base> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSBodyStructure"/> </type> </element> <element id="EHDSObservation.result"> <path value="EHDSObservation.result"/> <short value="Result of the observation including text, numeric, coded, and other types of results of the measurement and measurement uncertainty. Content of the observation result will vary according to the type of the observation."/> <definition value="Result of the observation including text, numeric, coded, and other types of results of the measurement and measurement uncertainty. Content of the observation result will vary according to the type of the observation."/> <min value="1"/> <max value="1"/> <base> <path value="EHDSObservation.result"/> <min value="1"/> <max value="1"/> </base> <type> <code value="Base"/> </type> </element> <element id="EHDSObservation.result.value[x]"> <path value="EHDSObservation.result.value[x]"/> <short value="Observation result value according to the type of observation. Model covers only most frequently used data types but other data types can be used as well. Text result value should be used only if coded result value is not expected otherwise use valueCodeableConcept.text. For Quantity, Range and Ratio, result units of the measurement should be provided."/> <definition value="Observation result value according to the type of observation. Model covers only most frequently used data types but other data types can be used as well. Text result value should be used only if coded result value is not expected otherwise use valueCodeableConcept.text. For Quantity, Range and Ratio, result units of the measurement should be provided."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.result.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <type> <code value="Quantity"/> </type> <type> <code value="Range"/> </type> <type> <code value="Ratio"/> </type> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="UCUM for units, SNOMED CT for coded results"/> </binding> </element> <element id="EHDSObservation.result.uncertainty"> <path value="EHDSObservation.result.uncertainty"/> <short value="Measurement uncertainty type and interval if needed."/> <definition value="Measurement uncertainty information about the observation result."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.result.uncertainty"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Base"/> </type> </element> <element id="EHDSObservation.result.uncertainty.value"> <path value="EHDSObservation.result.uncertainty.value"/> <short value="The numerical value of the measurement uncertainty."/> <definition value="The numerical value of the measurement uncertainty."/> <min value="1"/> <max value="1"/> <base> <path value="EHDSObservation.result.uncertainty.value"/> <min value="1"/> <max value="1"/> </base> <type> <code value="decimal"/> </type> </element> <element id="EHDSObservation.result.uncertainty.type"> <path value="EHDSObservation.result.uncertainty.type"/> <short value="Probability Distribution Type for uncertainty"/> <definition value="Probability Distribution Type for uncertainty"/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.result.uncertainty.type"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Coding"/> </type> <binding> <strength value="preferred"/> <description value="HL7 ProbabilityDistributionType"/> </binding> </element> <element id="EHDSObservation.result.dataAbsentReason"> <path value="EHDSObservation.result.dataAbsentReason"/> <short value="Provides a reason why the expected value in the element Observation.value[x] is missing."/> <definition value="Provides a reason why the expected value in the element Observation.value[x] is missing."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.result.dataAbsentReason"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="HL7 Data absent reason"/> </binding> </element> <element id="EHDSObservation.referenceRange"> <path value="EHDSObservation.referenceRange"/> <short value="Reference range, multiple reference ranges of different types could by provided. Provides guide for interpretation of the result."/> <definition value="Reference range, multiple reference ranges of different types could by provided. Provides guide for interpretation of the result."/> <comment value="Reference ranges are usually implied only for a numeric scale type. Use of the same units for reference range and value is implied."/> <min value="0"/> <max value="*"/> <base> <path value="EHDSObservation.referenceRange"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Base"/> </type> </element> <element id="EHDSObservation.referenceRange.low"> <path value="EHDSObservation.referenceRange.low"/> <short value="Low limit of the reference range."/> <definition value="Low limit of the reference range."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.referenceRange.low"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Quantity"/> </type> <binding> <strength value="preferred"/> <description value="UCUM for units"/> </binding> </element> <element id="EHDSObservation.referenceRange.high"> <path value="EHDSObservation.referenceRange.high"/> <short value="High limit of the reference range."/> <definition value="High limit of the reference range."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.referenceRange.high"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Quantity"/> </type> <binding> <strength value="preferred"/> <description value="UCUM for units"/> </binding> </element> <element id="EHDSObservation.referenceRange.normalValue"> <path value="EHDSObservation.referenceRange.normalValue"/> <short value="Normal value, if relevant for the reference range."/> <definition value="Normal value, if relevant for the reference range."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.referenceRange.normalValue"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="SNOMED CT"/> </binding> </element> <element id="EHDSObservation.referenceRange.type"> <path value="EHDSObservation.referenceRange.type"/> <short value="Type of reference range."/> <definition value="Type of reference range."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.referenceRange.type"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="HL7 Observation Reference Range Meaning Codes"/> </binding> </element> <element id="EHDSObservation.referenceRange.appliesTo"> <path value="EHDSObservation.referenceRange.appliesTo"/> <short value="Codes to indicate the target population this reference range applies to."/> <definition value="Codes to indicate the target population this reference range applies to. For example, a reference range may be based on the normal population or a particular sex or race. Multiple appliesTo are interpreted as an \"AND\" of the target populations."/> <comment value="Multiple appliesTo are interpreted as an "AND" of the target populations."/> <min value="0"/> <max value="*"/> <base> <path value="EHDSObservation.referenceRange.appliesTo"/> <min value="0"/> <max value="*"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="SNOMED CT, HL7 v3-Race"/> </binding> </element> <element id="EHDSObservation.referenceRange.age"> <path value="EHDSObservation.referenceRange.age"/> <short value="Age range to which this reference range applies if applicable."/> <definition value="Age range to which this reference range applies if applicable."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.referenceRange.age"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Range"/> </type> <binding> <strength value="preferred"/> <description value="UCUM for units"/> </binding> </element> <element id="EHDSObservation.referenceRange.text"> <path value="EHDSObservation.referenceRange.text"/> <short value="Text based reference range in an observation."/> <definition value="Text based reference range in an observation which may be used when a quantitative range is not appropriate for an observation. An example would be a reference value of \"Negative\" or a list or table of \"normals\"."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.referenceRange.text"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> </element> <element id="EHDSObservation.interpretation"> <path value="EHDSObservation.interpretation"/> <short value="Information about reference intervals and result interpretation."/> <definition value="Information about reference intervals and result interpretation."/> <min value="0"/> <max value="*"/> <base> <path value="EHDSObservation.interpretation"/> <min value="0"/> <max value="*"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="SNOMED CT, HL7 ObservationInterpretation"/> </binding> </element> <element id="EHDSObservation.note"> <path value="EHDSObservation.note"/> <short value="Comments and narrative representation of the observation result and findings."/> <definition value="Comments and narrative representation of the observation result and findings."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.note"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> </element> <element id="EHDSObservation.component"> <path value="EHDSObservation.component"/> <short value="Component in case the observation consists of multiple sub-observations (e.g. blood pressure)."/> <definition value="Component in case the observation consists of multiple sub-observations (e.g. blood pressure)."/> <min value="0"/> <max value="*"/> <base> <path value="EHDSObservation.component"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Base"/> </type> </element> <element id="EHDSObservation.component.code"> <path value="EHDSObservation.component.code"/> <short value="Code representing the observation using the agreed code systems."/> <definition value="Code representing the observation using the agreed code systems."/> <min value="1"/> <max value="1"/> <base> <path value="EHDSObservation.component.code"/> <min value="1"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="LOINC, NPU, SNOMED CT"/> </binding> </element> <element id="EHDSObservation.component.originalName"> <path value="EHDSObservation.component.originalName"/> <short value="Original (conventional) name of the observation as used in the local laboratory or clinical system."/> <definition value="Original (conventional) name of the observation as used in the local laboratory or clinical system."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.component.originalName"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> </element> <element id="EHDSObservation.component.result"> <path value="EHDSObservation.component.result"/> <short value="Result of the observation including text, numeric, coded, and other types of results of the measurement and measurement uncertainty. Content of the observation result will vary according to the type of the observation."/> <definition value="Result of the observation including text, numeric, coded, and other types of results of the measurement and measurement uncertainty. Content of the observation result will vary according to the type of the observation."/> <min value="1"/> <max value="1"/> <base> <path value="EHDSObservation.component.result"/> <min value="1"/> <max value="1"/> </base> <type> <code value="Base"/> </type> </element> <element id="EHDSObservation.component.result.value[x]"> <path value="EHDSObservation.component.result.value[x]"/> <short value="Observation result value according to the type of observation. Model covers only most frequently used data types but other data types can be used as well. Text result value should be used only if coded result value is not expected otherwise use valueCodeableConcept.text. For Quantity, Range and Ratio, result units of the measurement should be provided."/> <definition value="Observation result value according to the type of observation. Model covers only most frequently used data types but other data types can be used as well. Text result value should be used only if coded result value is not expected otherwise use valueCodeableConcept.text. For Quantity, Range and Ratio, result units of the measurement should be provided."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.component.result.value[x]"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> <type> <code value="Quantity"/> </type> <type> <code value="Range"/> </type> <type> <code value="Ratio"/> </type> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="UCUM for units, SNOMED CT for coded results"/> </binding> </element> <element id="EHDSObservation.component.result.uncertainty"> <path value="EHDSObservation.component.result.uncertainty"/> <short value="Measurement uncertainty type and interval if needed."/> <definition value="Measurement uncertainty information about the observation result."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.component.result.uncertainty"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Base"/> </type> </element> <element id="EHDSObservation.component.result.uncertainty.value"> <path value="EHDSObservation.component.result.uncertainty.value"/> <short value="The numerical value of the measurement uncertainty."/> <definition value="The numerical value of the measurement uncertainty."/> <min value="1"/> <max value="1"/> <base> <path value="EHDSObservation.component.result.uncertainty.value"/> <min value="1"/> <max value="1"/> </base> <type> <code value="decimal"/> </type> </element> <element id="EHDSObservation.component.result.uncertainty.type"> <path value="EHDSObservation.component.result.uncertainty.type"/> <short value="Probability Distribution Type for uncertainty"/> <definition value="Probability Distribution Type for uncertainty"/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.component.result.uncertainty.type"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Coding"/> </type> <binding> <strength value="preferred"/> <description value="HL7 ProbabilityDistributionType"/> </binding> </element> <element id="EHDSObservation.component.result.dataAbsentReason"> <path value="EHDSObservation.component.result.dataAbsentReason"/> <short value="Provides a reason why the expected value in the element component.value[x] is missing."/> <definition value="Provides a reason why the expected value in the element component.value[x] is missing."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.component.result.dataAbsentReason"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="HL7 Data absent reason"/> </binding> </element> <element id="EHDSObservation.component.referenceRange"> <path value="EHDSObservation.component.referenceRange"/> <short value="Reference range, multiple reference ranges of different types could by provided. Provides guide for interpretation of the result."/> <definition value="Reference range, multiple reference ranges of different types could by provided. Provides guide for interpretation of the result."/> <comment value="Reference ranges are usually implied only for a numeric scale type. Use of the same units for reference range and value is implied."/> <min value="0"/> <max value="*"/> <base> <path value="EHDSObservation.component.referenceRange"/> <min value="0"/> <max value="*"/> </base> <type> <code value="Base"/> </type> </element> <element id="EHDSObservation.component.referenceRange.low"> <path value="EHDSObservation.component.referenceRange.low"/> <short value="Low limit of the reference range."/> <definition value="Low limit of the reference range."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.component.referenceRange.low"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Quantity"/> </type> <binding> <strength value="preferred"/> <description value="UCUM for units"/> </binding> </element> <element id="EHDSObservation.component.referenceRange.high"> <path value="EHDSObservation.component.referenceRange.high"/> <short value="High limit of the reference range."/> <definition value="High limit of the reference range."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.component.referenceRange.high"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Quantity"/> </type> <binding> <strength value="preferred"/> <description value="UCUM for units"/> </binding> </element> <element id="EHDSObservation.component.referenceRange.normalValue"> <path value="EHDSObservation.component.referenceRange.normalValue"/> <short value="Normal value, if relevant for the reference range."/> <definition value="Normal value, if relevant for the reference range."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.component.referenceRange.normalValue"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="SNOMED CT"/> </binding> </element> <element id="EHDSObservation.component.referenceRange.type"> <path value="EHDSObservation.component.referenceRange.type"/> <short value="Type of reference range."/> <definition value="Type of reference range."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.component.referenceRange.type"/> <min value="0"/> <max value="1"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="HL7 Observation Reference Range Meaning Codes"/> </binding> </element> <element id="EHDSObservation.component.referenceRange.appliesTo"> <path value="EHDSObservation.component.referenceRange.appliesTo"/> <short value="Codes to indicate the target population this reference range applies to."/> <definition value="Codes to indicate the target population this reference range applies to. For example, a reference range may be based on the normal population or a particular sex or race. Multiple appliesTo are interpreted as an \"AND\" of the target populations."/> <comment value="Multiple appliesTo are interpreted as an "AND" of the target populations."/> <min value="0"/> <max value="*"/> <base> <path value="EHDSObservation.component.referenceRange.appliesTo"/> <min value="0"/> <max value="*"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="SNOMED CT, HL7 v3-Race"/> </binding> </element> <element id="EHDSObservation.component.referenceRange.age"> <path value="EHDSObservation.component.referenceRange.age"/> <short value="Age range to which this reference range applies if applicable."/> <definition value="Age range to which this reference range applies if applicable."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.component.referenceRange.age"/> <min value="0"/> <max value="1"/> </base> <type> <code value="Range"/> </type> <binding> <strength value="preferred"/> <description value="UCUM for units"/> </binding> </element> <element id="EHDSObservation.component.referenceRange.text"> <path value="EHDSObservation.component.referenceRange.text"/> <short value="Text based reference range in an observation."/> <definition value="Text based reference range in an observation which may be used when a quantitative range is not appropriate for an observation. An example would be a reference value of \"Negative\" or a list or table of \"normals\"."/> <min value="0"/> <max value="1"/> <base> <path value="EHDSObservation.component.referenceRange.text"/> <min value="0"/> <max value="1"/> </base> <type> <code value="string"/> </type> </element> <element id="EHDSObservation.component.interpretation"> <path value="EHDSObservation.component.interpretation"/> <short value="Information about reference intervals and result interpretation."/> <definition value="Information about reference intervals and result interpretation."/> <min value="0"/> <max value="*"/> <base> <path value="EHDSObservation.component.interpretation"/> <min value="0"/> <max value="*"/> </base> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="SNOMED CT, HL7 ObservationInterpretation"/> </binding> </element> <element id="EHDSObservation.derivedFrom[x]"> <path value="EHDSObservation.derivedFrom[x]"/> <short value="Reference to the related resource from which the observation has been made. For example, a calculated anion gap or a fetal measurement based on an ultrasound image."/> <definition value="Reference to the related resource from which the observation has been made. For example, a calculated anion gap or a fetal measurement based on an ultrasound image."/> <min value="0"/> <max value="*"/> <base> <path value="EHDSObservation.derivedFrom[x]"/> <min value="0"/> <max value="*"/> </base> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSObservation"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSLaboratoryObservation"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSImagingStudy"/> </type> </element> <element id="EHDSObservation.hasMember[x]"> <path value="EHDSObservation.hasMember[x]"/> <short value="This observation is a group observation (e.g. a battery, a panel of tests, a set of vital sign measurements) that includes the target as a member of the group."/> <definition value="This observation is a group observation (e.g. a battery, a panel of tests, a set of vital sign measurements) that includes the target as a member of the group."/> <min value="0"/> <max value="*"/> <base> <path value="EHDSObservation.hasMember[x]"/> <min value="0"/> <max value="*"/> </base> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSLaboratoryObservation"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSObservation"/> </type> </element> </snapshot> <differential> <element id="EHDSObservation"> <path value="EHDSObservation"/> <short value="Observation model"/> <definition value="EHDS refined base model for Observation information"/> </element> <element id="EHDSObservation.header.subject"> <path value="EHDSObservation.header.subject"/> <short value="Patient who is receiving health care. This patient might be different from the direct subject of the observation."/> </element> <element id="EHDSObservation.header.status"> <path value="EHDSObservation.header.status"/> <binding> <strength value="preferred"/> <description value="HL7 Observation status"/> </binding> </element> <element id="EHDSObservation.header.directSubject[x]"> <path value="EHDSObservation.header.directSubject[x]"/> <short value="The direct subject of the observation if different from the patient (subject of care), e.g. an observation of an implanted device"/> <definition value="The direct subject of the observation if different from the patient (subject of care), e.g. an observation of an implanted device"/> <min value="0"/> <max value="1"/> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSPatient"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSPatientAnimal"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSLocation"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSDevice"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSHealthProfessional"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSOrganisation"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSProcedure"/> </type> </element> <element id="EHDSObservation.observationDate[x]"> <path value="EHDSObservation.observationDate[x]"/> <short value="Clinically relevant time or time period for the observation"/> <definition value="Clinically relevant time or time period for the observation"/> <min value="1"/> <max value="1"/> <type> <code value="dateTime"/> </type> <type> <code value="Period"/> </type> </element> <element id="EHDSObservation.type"> <path value="EHDSObservation.type"/> <short value="Observation type. Code and name representing the type of the observation using the agreed code systems."/> <definition value="Observation type. Code and name representing the type of the observation using the agreed code systems."/> <min value="1"/> <max value="1"/> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="LOINC, NPU, SNOMED CT"/> </binding> </element> <element id="EHDSObservation.originalName"> <path value="EHDSObservation.originalName"/> <short value="Original (conventional) name of the observation as used in the local laboratory or clinical system."/> <definition value="Original (conventional) name of the observation as used in the local laboratory or clinical system."/> <min value="0"/> <max value="1"/> <type> <code value="string"/> </type> </element> <element id="EHDSObservation.method"> <path value="EHDSObservation.method"/> <short value="Observation method"/> <definition value="Observation method (measurement principle) to obtain the result."/> <min value="0"/> <max value="1"/> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="SNOMED CT"/> </binding> </element> <element id="EHDSObservation.specimen"> <path value="EHDSObservation.specimen"/> <short value="Specimen used for this observation."/> <definition value="Specimen used for this observation."/> <min value="0"/> <max value="1"/> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSSpecimen"/> </type> </element> <element id="EHDSObservation.order"> <path value="EHDSObservation.order"/> <short value="Identifies order and order placer this observation belongs to"/> <definition value="Identifies order and order placer this observation belongs to"/> <min value="0"/> <max value="1"/> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSServiceRequest"/> </type> </element> <element id="EHDSObservation.performer[x]"> <path value="EHDSObservation.performer[x]"/> <short value="Performer of the observation. Some test could be performed by the patient himself or by a care giver. Those are in the scope of this deliverable under specified conditions."/> <definition value="Performer of the observation. Some test could be performed by the patient himself or by a care giver. Those are in the scope of this deliverable under specified conditions."/> <min value="0"/> <max value="*"/> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSOrganisation"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSHealthProfessional"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSPatient"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSRelatedPerson"/> </type> </element> <element id="EHDSObservation.bodySite"> <path value="EHDSObservation.bodySite"/> <short value="Anatomic location and laterality where the observation was performed."/> <definition value="Anatomic location and laterality where the observation was performed."/> <min value="0"/> <max value="1"/> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSBodyStructure"/> </type> </element> <element id="EHDSObservation.result"> <path value="EHDSObservation.result"/> <short value="Result of the observation including text, numeric, coded, and other types of results of the measurement and measurement uncertainty. Content of the observation result will vary according to the type of the observation."/> <definition value="Result of the observation including text, numeric, coded, and other types of results of the measurement and measurement uncertainty. Content of the observation result will vary according to the type of the observation."/> <min value="1"/> <max value="1"/> <type> <code value="Base"/> </type> </element> <element id="EHDSObservation.result.value[x]"> <path value="EHDSObservation.result.value[x]"/> <short value="Observation result value according to the type of observation. Model covers only most frequently used data types but other data types can be used as well. Text result value should be used only if coded result value is not expected otherwise use valueCodeableConcept.text. For Quantity, Range and Ratio, result units of the measurement should be provided."/> <definition value="Observation result value according to the type of observation. Model covers only most frequently used data types but other data types can be used as well. Text result value should be used only if coded result value is not expected otherwise use valueCodeableConcept.text. For Quantity, Range and Ratio, result units of the measurement should be provided."/> <min value="0"/> <max value="1"/> <type> <code value="string"/> </type> <type> <code value="Quantity"/> </type> <type> <code value="Range"/> </type> <type> <code value="Ratio"/> </type> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="UCUM for units, SNOMED CT for coded results"/> </binding> </element> <element id="EHDSObservation.result.uncertainty"> <path value="EHDSObservation.result.uncertainty"/> <short value="Measurement uncertainty type and interval if needed."/> <definition value="Measurement uncertainty information about the observation result."/> <min value="0"/> <max value="1"/> <type> <code value="Base"/> </type> </element> <element id="EHDSObservation.result.uncertainty.value"> <path value="EHDSObservation.result.uncertainty.value"/> <short value="The numerical value of the measurement uncertainty."/> <definition value="The numerical value of the measurement uncertainty."/> <min value="1"/> <max value="1"/> <type> <code value="decimal"/> </type> </element> <element id="EHDSObservation.result.uncertainty.type"> <path value="EHDSObservation.result.uncertainty.type"/> <short value="Probability Distribution Type for uncertainty"/> <definition value="Probability Distribution Type for uncertainty"/> <min value="0"/> <max value="1"/> <type> <code value="Coding"/> </type> <binding> <strength value="preferred"/> <description value="HL7 ProbabilityDistributionType"/> </binding> </element> <element id="EHDSObservation.result.dataAbsentReason"> <path value="EHDSObservation.result.dataAbsentReason"/> <short value="Provides a reason why the expected value in the element Observation.value[x] is missing."/> <definition value="Provides a reason why the expected value in the element Observation.value[x] is missing."/> <min value="0"/> <max value="1"/> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="HL7 Data absent reason"/> </binding> </element> <element id="EHDSObservation.referenceRange"> <path value="EHDSObservation.referenceRange"/> <short value="Reference range, multiple reference ranges of different types could by provided. Provides guide for interpretation of the result."/> <definition value="Reference range, multiple reference ranges of different types could by provided. Provides guide for interpretation of the result."/> <comment value="Reference ranges are usually implied only for a numeric scale type. Use of the same units for reference range and value is implied."/> <min value="0"/> <max value="*"/> <type> <code value="Base"/> </type> </element> <element id="EHDSObservation.referenceRange.low"> <path value="EHDSObservation.referenceRange.low"/> <short value="Low limit of the reference range."/> <definition value="Low limit of the reference range."/> <min value="0"/> <max value="1"/> <type> <code value="Quantity"/> </type> <binding> <strength value="preferred"/> <description value="UCUM for units"/> </binding> </element> <element id="EHDSObservation.referenceRange.high"> <path value="EHDSObservation.referenceRange.high"/> <short value="High limit of the reference range."/> <definition value="High limit of the reference range."/> <min value="0"/> <max value="1"/> <type> <code value="Quantity"/> </type> <binding> <strength value="preferred"/> <description value="UCUM for units"/> </binding> </element> <element id="EHDSObservation.referenceRange.normalValue"> <path value="EHDSObservation.referenceRange.normalValue"/> <short value="Normal value, if relevant for the reference range."/> <definition value="Normal value, if relevant for the reference range."/> <min value="0"/> <max value="1"/> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="SNOMED CT"/> </binding> </element> <element id="EHDSObservation.referenceRange.type"> <path value="EHDSObservation.referenceRange.type"/> <short value="Type of reference range."/> <definition value="Type of reference range."/> <min value="0"/> <max value="1"/> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="HL7 Observation Reference Range Meaning Codes"/> </binding> </element> <element id="EHDSObservation.referenceRange.appliesTo"> <path value="EHDSObservation.referenceRange.appliesTo"/> <short value="Codes to indicate the target population this reference range applies to."/> <definition value="Codes to indicate the target population this reference range applies to. For example, a reference range may be based on the normal population or a particular sex or race. Multiple appliesTo are interpreted as an \"AND\" of the target populations."/> <comment value="Multiple appliesTo are interpreted as an "AND" of the target populations."/> <min value="0"/> <max value="*"/> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="SNOMED CT, HL7 v3-Race"/> </binding> </element> <element id="EHDSObservation.referenceRange.age"> <path value="EHDSObservation.referenceRange.age"/> <short value="Age range to which this reference range applies if applicable."/> <definition value="Age range to which this reference range applies if applicable."/> <min value="0"/> <max value="1"/> <type> <code value="Range"/> </type> <binding> <strength value="preferred"/> <description value="UCUM for units"/> </binding> </element> <element id="EHDSObservation.referenceRange.text"> <path value="EHDSObservation.referenceRange.text"/> <short value="Text based reference range in an observation."/> <definition value="Text based reference range in an observation which may be used when a quantitative range is not appropriate for an observation. An example would be a reference value of \"Negative\" or a list or table of \"normals\"."/> <min value="0"/> <max value="1"/> <type> <code value="string"/> </type> </element> <element id="EHDSObservation.interpretation"> <path value="EHDSObservation.interpretation"/> <short value="Information about reference intervals and result interpretation."/> <definition value="Information about reference intervals and result interpretation."/> <min value="0"/> <max value="*"/> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="SNOMED CT, HL7 ObservationInterpretation"/> </binding> </element> <element id="EHDSObservation.note"> <path value="EHDSObservation.note"/> <short value="Comments and narrative representation of the observation result and findings."/> <definition value="Comments and narrative representation of the observation result and findings."/> <min value="0"/> <max value="1"/> <type> <code value="string"/> </type> </element> <element id="EHDSObservation.component"> <path value="EHDSObservation.component"/> <short value="Component in case the observation consists of multiple sub-observations (e.g. blood pressure)."/> <definition value="Component in case the observation consists of multiple sub-observations (e.g. blood pressure)."/> <min value="0"/> <max value="*"/> <type> <code value="Base"/> </type> </element> <element id="EHDSObservation.component.code"> <path value="EHDSObservation.component.code"/> <short value="Code representing the observation using the agreed code systems."/> <definition value="Code representing the observation using the agreed code systems."/> <min value="1"/> <max value="1"/> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="LOINC, NPU, SNOMED CT"/> </binding> </element> <element id="EHDSObservation.component.originalName"> <path value="EHDSObservation.component.originalName"/> <short value="Original (conventional) name of the observation as used in the local laboratory or clinical system."/> <definition value="Original (conventional) name of the observation as used in the local laboratory or clinical system."/> <min value="0"/> <max value="1"/> <type> <code value="string"/> </type> </element> <element id="EHDSObservation.component.result"> <path value="EHDSObservation.component.result"/> <short value="Result of the observation including text, numeric, coded, and other types of results of the measurement and measurement uncertainty. Content of the observation result will vary according to the type of the observation."/> <definition value="Result of the observation including text, numeric, coded, and other types of results of the measurement and measurement uncertainty. Content of the observation result will vary according to the type of the observation."/> <min value="1"/> <max value="1"/> <type> <code value="Base"/> </type> </element> <element id="EHDSObservation.component.result.value[x]"> <path value="EHDSObservation.component.result.value[x]"/> <short value="Observation result value according to the type of observation. Model covers only most frequently used data types but other data types can be used as well. Text result value should be used only if coded result value is not expected otherwise use valueCodeableConcept.text. For Quantity, Range and Ratio, result units of the measurement should be provided."/> <definition value="Observation result value according to the type of observation. Model covers only most frequently used data types but other data types can be used as well. Text result value should be used only if coded result value is not expected otherwise use valueCodeableConcept.text. For Quantity, Range and Ratio, result units of the measurement should be provided."/> <min value="0"/> <max value="1"/> <type> <code value="string"/> </type> <type> <code value="Quantity"/> </type> <type> <code value="Range"/> </type> <type> <code value="Ratio"/> </type> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="UCUM for units, SNOMED CT for coded results"/> </binding> </element> <element id="EHDSObservation.component.result.uncertainty"> <path value="EHDSObservation.component.result.uncertainty"/> <short value="Measurement uncertainty type and interval if needed."/> <definition value="Measurement uncertainty information about the observation result."/> <min value="0"/> <max value="1"/> <type> <code value="Base"/> </type> </element> <element id="EHDSObservation.component.result.uncertainty.value"> <path value="EHDSObservation.component.result.uncertainty.value"/> <short value="The numerical value of the measurement uncertainty."/> <definition value="The numerical value of the measurement uncertainty."/> <min value="1"/> <max value="1"/> <type> <code value="decimal"/> </type> </element> <element id="EHDSObservation.component.result.uncertainty.type"> <path value="EHDSObservation.component.result.uncertainty.type"/> <short value="Probability Distribution Type for uncertainty"/> <definition value="Probability Distribution Type for uncertainty"/> <min value="0"/> <max value="1"/> <type> <code value="Coding"/> </type> <binding> <strength value="preferred"/> <description value="HL7 ProbabilityDistributionType"/> </binding> </element> <element id="EHDSObservation.component.result.dataAbsentReason"> <path value="EHDSObservation.component.result.dataAbsentReason"/> <short value="Provides a reason why the expected value in the element component.value[x] is missing."/> <definition value="Provides a reason why the expected value in the element component.value[x] is missing."/> <min value="0"/> <max value="1"/> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="HL7 Data absent reason"/> </binding> </element> <element id="EHDSObservation.component.referenceRange"> <path value="EHDSObservation.component.referenceRange"/> <short value="Reference range, multiple reference ranges of different types could by provided. Provides guide for interpretation of the result."/> <definition value="Reference range, multiple reference ranges of different types could by provided. Provides guide for interpretation of the result."/> <comment value="Reference ranges are usually implied only for a numeric scale type. Use of the same units for reference range and value is implied."/> <min value="0"/> <max value="*"/> <type> <code value="Base"/> </type> </element> <element id="EHDSObservation.component.referenceRange.low"> <path value="EHDSObservation.component.referenceRange.low"/> <short value="Low limit of the reference range."/> <definition value="Low limit of the reference range."/> <min value="0"/> <max value="1"/> <type> <code value="Quantity"/> </type> <binding> <strength value="preferred"/> <description value="UCUM for units"/> </binding> </element> <element id="EHDSObservation.component.referenceRange.high"> <path value="EHDSObservation.component.referenceRange.high"/> <short value="High limit of the reference range."/> <definition value="High limit of the reference range."/> <min value="0"/> <max value="1"/> <type> <code value="Quantity"/> </type> <binding> <strength value="preferred"/> <description value="UCUM for units"/> </binding> </element> <element id="EHDSObservation.component.referenceRange.normalValue"> <path value="EHDSObservation.component.referenceRange.normalValue"/> <short value="Normal value, if relevant for the reference range."/> <definition value="Normal value, if relevant for the reference range."/> <min value="0"/> <max value="1"/> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="SNOMED CT"/> </binding> </element> <element id="EHDSObservation.component.referenceRange.type"> <path value="EHDSObservation.component.referenceRange.type"/> <short value="Type of reference range."/> <definition value="Type of reference range."/> <min value="0"/> <max value="1"/> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="HL7 Observation Reference Range Meaning Codes"/> </binding> </element> <element id="EHDSObservation.component.referenceRange.appliesTo"> <path value="EHDSObservation.component.referenceRange.appliesTo"/> <short value="Codes to indicate the target population this reference range applies to."/> <definition value="Codes to indicate the target population this reference range applies to. For example, a reference range may be based on the normal population or a particular sex or race. Multiple appliesTo are interpreted as an \"AND\" of the target populations."/> <comment value="Multiple appliesTo are interpreted as an "AND" of the target populations."/> <min value="0"/> <max value="*"/> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="SNOMED CT, HL7 v3-Race"/> </binding> </element> <element id="EHDSObservation.component.referenceRange.age"> <path value="EHDSObservation.component.referenceRange.age"/> <short value="Age range to which this reference range applies if applicable."/> <definition value="Age range to which this reference range applies if applicable."/> <min value="0"/> <max value="1"/> <type> <code value="Range"/> </type> <binding> <strength value="preferred"/> <description value="UCUM for units"/> </binding> </element> <element id="EHDSObservation.component.referenceRange.text"> <path value="EHDSObservation.component.referenceRange.text"/> <short value="Text based reference range in an observation."/> <definition value="Text based reference range in an observation which may be used when a quantitative range is not appropriate for an observation. An example would be a reference value of \"Negative\" or a list or table of \"normals\"."/> <min value="0"/> <max value="1"/> <type> <code value="string"/> </type> </element> <element id="EHDSObservation.component.interpretation"> <path value="EHDSObservation.component.interpretation"/> <short value="Information about reference intervals and result interpretation."/> <definition value="Information about reference intervals and result interpretation."/> <min value="0"/> <max value="*"/> <type> <code value="CodeableConcept"/> </type> <binding> <strength value="preferred"/> <description value="SNOMED CT, HL7 ObservationInterpretation"/> </binding> </element> <element id="EHDSObservation.derivedFrom[x]"> <path value="EHDSObservation.derivedFrom[x]"/> <short value="Reference to the related resource from which the observation has been made. For example, a calculated anion gap or a fetal measurement based on an ultrasound image."/> <definition value="Reference to the related resource from which the observation has been made. For example, a calculated anion gap or a fetal measurement based on an ultrasound image."/> <min value="0"/> <max value="*"/> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSObservation"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSLaboratoryObservation"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSImagingStudy"/> </type> </element> <element id="EHDSObservation.hasMember[x]"> <path value="EHDSObservation.hasMember[x]"/> <short value="This observation is a group observation (e.g. a battery, a panel of tests, a set of vital sign measurements) that includes the target as a member of the group."/> <definition value="This observation is a group observation (e.g. a battery, a panel of tests, a set of vital sign measurements) that includes the target as a member of the group."/> <min value="0"/> <max value="*"/> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSLaboratoryObservation"/> </type> <type> <code value="http://www.xt-ehr.eu/fhir/models/StructureDefinition/EHDSObservation"/> </type> </element> </differential> </StructureDefinition>