A task to be performed.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The current status of the task.

The current status of the task.

These states enable coordination of task status with off-the-shelf workflow solutions that support automation of tasks.

Indicates the "level" of actionability associated with the Task, i.e. i+R[9]Cs this a proposed task, a planned task, an actionable task, etc.

This element is immutable. Proposed tasks, planned tasks, etc. must be distinct instances.

In most cases, Tasks will have an intent of "order".

Distinguishes whether the task is a proposal, plan or full order.

A name or code (or both) briefly describing what the task involves.

The title (eg "My Tasks", "Outstanding Tasks for Patient X") should go into the code.

Codes to identify what the task involves. These will typically be specific to a particular workflow.

The request being actioned or the resource being manipulated by this task.

If multiple resources need to be manipulated, use sub-tasks. (This ensures that status can be tracked independently for each referenced resource.).

Used to identify the thing to be done.

The entity who benefits from the performance of the service specified in the task (e.g., the patient).

Used to track tasks outstanding for a beneficiary. Do not use to track the task owner or creator (see owner and creator respectively). This can also affect access control.

An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

The creator of the task.

Identifies who created this task. May be used by access control mechanisms (e.g., to ensure that only the creator can cancel a task).

Individual organization or Device currently responsible for task execution.

Tasks may be created with an owner not yet identified.

Identifies who is expected to perform this task.

Free-text information captured about the task as it progresses.

A task to be performed.

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

The base language in which the resource is written.

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

A human language.

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The business identifier for this task.

The URL pointing to a FHIR-defined protocol, guideline, orderset or other definition that is adhered to in whole or in part by this Task.

Enables a formal definition of how he task is to be performed, enabling automation.

The URL pointing to an externally maintained protocol, guideline, orderset or other definition that is adhered to in whole or in part by this Task.

Enables a formal definition of how he task is to be performed (e.g. using BPMN, BPEL, XPDL or other formal notation to be associated with a task), enabling automation.

BasedOn refers to a higher-level authorization that triggered the creation of the task. It references a "request" resource such as a ServiceRequest, MedicationRequest, ServiceRequest, CarePlan, etc. which is distinct from the "request" resource the task is seeking to fulfill. This latter resource is referenced by FocusOn. For example, based on a ServiceRequest (= BasedOn), a task is created to fulfill a procedureRequest ( = FocusOn ) to collect a specimen from a patient.

An identifier that links together multiple tasks and other requests that were created in the same context.

Billing and/or reporting can be linked to whether multiple requests were created as a single unit.

Task that this particular task is part of.

This should usually be 0..1.

Allows tasks to be broken down into sub-steps (and this division can occur independent of the original task).

The current status of the task.

The current status of the task.

These states enable coordination of task status with off-the-shelf workflow solutions that support automation of tasks.

An explanation as to why this task is held, failed, was refused, etc.

This applies to the current status. Look at the history of the task to see reasons for past statuses.

Codes to identify the reason for current status. These will typically be specific to a particular workflow.

Contains business-specific nuances of the business state.

The domain-specific business-contextual sub-state of the task. For example: "Blood drawn", "IV inserted", "Awaiting physician signature", etc.

There's often a need to track substates of a task - this is often variable by specific workflow implementation.

Indicates the "level" of actionability associated with the Task, i.e. i+R[9]Cs this a proposed task, a planned task, an actionable task, etc.

This element is immutable. Proposed tasks, planned tasks, etc. must be distinct instances.

In most cases, Tasks will have an intent of "order".

Distinguishes whether the task is a proposal, plan or full order.

Indicates how quickly the Task should be addressed with respect to other requests.

The task's priority.

Used to identify the service level expected while performing a task.

A name or code (or both) briefly describing what the task involves.

The title (eg "My Tasks", "Outstanding Tasks for Patient X") should go into the code.

Codes to identify what the task involves. These will typically be specific to a particular workflow.

A free-text description of what is to be performed.

The request being actioned or the resource being manipulated by this task.

If multiple resources need to be manipulated, use sub-tasks. (This ensures that status can be tracked independently for each referenced resource.).

Used to identify the thing to be done.

The entity who benefits from the performance of the service specified in the task (e.g., the patient).

Used to track tasks outstanding for a beneficiary. Do not use to track the task owner or creator (see owner and creator respectively). This can also affect access control.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

Aa resource (or, for logical models, the URI of the logical model).

An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

The healthcare event (e.g. a patient and healthcare provider interaction) during which this task was created.

For some tasks it may be important to know the link between the encounter the task originated within.

Identifies the time action was first taken against the task (start) and/or the time final action was taken against the task prior to marking it as completed (end).

The date and time this task was created.

Most often used along with lastUpdated to track duration of task to supporting monitoring and management.

The date and time of last modification to this task.

Used along with history to track task activity and time in a particular task state. This enables monitoring and management.

The creator of the task.

Identifies who created this task. May be used by access control mechanisms (e.g., to ensure that only the creator can cancel a task).

The kind of participant that should perform the task.

The type(s) of task performers allowed.

Use to distinguish tasks on different activity queues.

Individual organization or Device currently responsible for task execution.

Tasks may be created with an owner not yet identified.

Identifies who is expected to perform this task.

Principal physical location where the this task is performed.

Ties the event to where the records are likely kept and provides context around the event occurrence (e.g. if it occurred inside or outside a dedicated healthcare setting).

A description or code indicating why this task needs to be performed.

This should only be included if there is no focus or if it differs from the reason indicated on the focus.

Indicates why the task is needed. E.g. Suspended because patient admitted to hospital.

A resource reference indicating why this task needs to be performed.

Tasks might be justified based on an Observation, a Condition, a past or planned procedure, etc. This should only be included if there is no focus or if it differs from the reason indicated on the focus. Use the CodeableConcept text element in Task.reasonCode if the data is free (uncoded) text.

Insurance plans, coverage extensions, pre-authorizations and/or pre-determinations that may be relevant to the Task.

Free-text information captured about the task as it progresses.

Links to Provenance records for past versions of this Task that identify key state transitions or updates that are likely to be relevant to a user looking at the current version of the task.

This element does not point to the Provenance associated with the current version of the resource - as it would be created after this version existed. The Provenance for the current version can be retrieved with a _revinclude.

If the Task.focus is a request resource and the task is seeking fulfillment (i.e. is asking for the request to be actioned), this element identifies any limitations on what parts of the referenced request should be actioned.

Sometimes when fulfillment is sought, you don't want full fulfillment.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Indicates the number of times the requested action should occur.

E.g. order that requests monthly lab tests, fulfillment is sought for 1.

Over what time-period is fulfillment sought.

Note that period.high is the due date representing the time by which the task should be completed.

E.g. order that authorizes 1 year's services. Fulfillment is sought for next 3 months.

For requests that are targeted to more than on potential recipient/target, for whom is fulfillment sought?

Additional information that may be needed in the execution of the task.

Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

A code or description indicating how the input is intended to be used as part of the task execution.

If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.

Inputs are named to enable task automation to bind data and pass it from one task to the next.

The value of the input parameter as a basic type.

Outputs produced by the Task.

Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The name of the Output parameter.

Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.

Outputs are named to enable task automation to bind data and pass it from one task to the next.

The value of the Output parameter as a basic type.

Task outputs can take any form.