VRIS - Viljatusravi infosüsteem
0.1.0 - draft Estonia flag

VRIS - Viljatusravi infosüsteem, published by TEHIK. This guide is not an authorized publication; it is the continuous build for version 0.1.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/TEHIK-EE/ig-ee-vris/ and changes regularly. See the Directory of published versions

Resource Profile: EEVRISRelatedPerson - Detailed Descriptions

Draft as of 2026-11-13

Definitions for the ee-vris-related-person resource profile.

See the documentation on how to interpret the contents of this table

0. RelatedPerson
2. RelatedPerson.identifier
ShortContact person identifiers.
NoteThis is a business identifier, not a resource identifier (see discussion)
4. RelatedPerson.active
Control1..?
6. RelatedPerson.patient
Short(ee Olenevalt doonori tüübist saab seose luua eri aegadel. SIIA VIIDE PATSIENDILE. Patsient võib olla doonor või retsipient.)
TypeReference(Patient: EE VRIS Donor, Patient: EE VRIS Recipient, EE MPI Patient Verified, Patient: EE VRIS Anonymous Patient)
8. RelatedPerson.relationship
ShortRelationship types, including contact type, personal relationship and donor type.
Control1..?
10. RelatedPerson.relationship:donortype
Slice Namedonortype
Definition

Specifies the relationship between recipient and donor. (mitt-partnerannetaja, partnerannetaja jne)

ShortSpecifies the relationship between recipient and donor. (ee |Partnerannetaja|Anonüümne doonor||Mitteparnerist doonor| NB! LOENDIT vaja!)
Control0..1
BindingThe codes SHALL be taken from https://fhir.ee/ValueSet/vris-doonori-tyyp
(required to https://fhir.ee/ValueSet/vris-doonori-tyyp)
12. RelatedPerson.name
ShortContact person name.
Control0..1
Must Supporttrue
14. RelatedPerson.address
Control0..0
16. RelatedPerson.photo
Control0..0
18. RelatedPerson.period
Control1..?
20. RelatedPerson.communication
Control0..0

See the documentation on how to interpret the contents of this table

0. RelatedPerson
Definition

Information about a person that is involved in a patient's health or the care for a patient, but who is not the target of healthcare, nor has a formal responsibility in the care process.

ShortA person that is related to a patient, but who is not a direct target of care
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. RelatedPerson.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. RelatedPerson.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. RelatedPerson.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. RelatedPerson.identifier
Definition

Identifier for a person within a particular scope.

ShortContact person identifiers.A human identifier for this person
Comments

RelatedPerson identifiers might not be unique across instances within a system, as a single human individual may be represented as many different RelatedPerson resources with different roles, periods, or relationships.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. RelatedPerson.identifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|5.0.0
(required to http://hl7.org/fhir/ValueSet/identifier-use|5.0.0)

Identifies the purpose for this identifier, if known .

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. RelatedPerson.identifier.system
Definition

Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control10..1
BindingUnless not suitable, these codes SHALL be taken from For codes, see Patsiendi identifikaatorite domeen
(extensible to https://fhir.ee/ValueSet/patsiendi-identifikaatorite-domeen)
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

ExampleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. RelatedPerson.identifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control10..1
This element is affected by the following invariants: ident-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
ExampleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. RelatedPerson.active
Definition

Whether this related person record is in active use.

ShortWhether this related person's record is in active use
Comments

This element is labeled as a modifier because it may be used to mark that the resource was created in error.

Control10..1
Typeboolean
Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

Need to be able to mark a related person record as not to be used, such as if it was created in error.

Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. RelatedPerson.patient
Definition

The patient this person is related to.

Short(ee Olenevalt doonori tüübist saab seose luua eri aegadel. SIIA VIIDE PATSIENDILE. Patsient võib olla doonor või retsipient.)The patient this person is related to
Control1..1
TypeReference(Patient: EE VRIS Donor, Patient: EE VRIS Recipient, EE MPI Patient Verified, Patient: EE VRIS Anonymous Patient, Patient)
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

We need to know which patient this RelatedPerson is related to.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. RelatedPerson.relationship
Definition

The nature of the relationship between the related person and the patient.

ShortRelationship types, including contact type, personal relationship and donor type.The relationship of the related person to the patient
Comments

The directionality of the relationship is from the RelatedPerson to the Patient. For example, if the Patient is a child, and the RelatedPerson is the mother, the relationship would be PRN (parent) or MTH (mother).

Control10..*
BindingThe codes SHOULD be taken from PatientRelationshipTypehttp://hl7.org/fhir/ValueSet/relatedperson-relationshiptype|5.0.0
(preferred to http://hl7.org/fhir/ValueSet/relatedperson-relationshiptype|5.0.0)

The nature of the relationship between a patient and the related person.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on RelatedPerson.relationship. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ coding.system
22. RelatedPerson.relationship:class
Slice Nameclass
Definition

The nature of the relationship between the related person and the patient.

ShortAssociation or legal relationship between two entities.The relationship of the related person to the patient
Comments

The directionality of the relationship is from the RelatedPerson to the Patient. For example, if the Patient is a child, and the RelatedPerson is the mother, the relationship would be PRN (parent) or MTH (mother).

Control0..*
BindingThe codes SHOULD be taken from PatientRelationshipTypehttp://hl7.org/fhir/ValueSet/relatedperson-relationshiptype|5.0.0
(preferred to http://hl7.org/fhir/ValueSet/relatedperson-relationshiptype|5.0.0)

The nature of the relationship between a patient and the related person.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. RelatedPerson.relationship:person
Slice Nameperson
Definition

The nature of the relationship between the related person and the patient.

ShortSocial relation to the patientThe relationship of the related person to the patient
Comments

The directionality of the relationship is from the RelatedPerson to the Patient. For example, if the Patient is a child, and the RelatedPerson is the mother, the relationship would be PRN (parent) or MTH (mother).

Control0..*
BindingThe codes SHOULD be taken from PatientRelationshipTypehttp://hl7.org/fhir/ValueSet/relatedperson-relationshiptype|5.0.0
(preferred to http://hl7.org/fhir/ValueSet/relatedperson-relationshiptype|5.0.0)

The nature of the relationship between a patient and the related person.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. RelatedPerson.relationship:donortype
Slice Namedonortype
Definition

Specifies the relationship between recipient and donor. (mitt-partnerannetaja, partnerannetaja jne)


The nature of the relationship between the related person and the patient.

ShortSpecifies the relationship between recipient and donor. (ee |Partnerannetaja|Anonüümne doonor||Mitteparnerist doonor| NB! LOENDIT vaja!)The relationship of the related person to the patient
Comments

The directionality of the relationship is from the RelatedPerson to the Patient. For example, if the Patient is a child, and the RelatedPerson is the mother, the relationship would be PRN (parent) or MTH (mother).

Control0..1*
BindingThe codes SHALL be taken from The codes SHOULD be taken from https://fhir.ee/ValueSet/vris-doonori-tyyphttp://hl7.org/fhir/ValueSet/relatedperson-relationshiptype|5.0.0
(required to https://fhir.ee/ValueSet/vris-doonori-tyyp)
TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. RelatedPerson.name
Definition

A name associated with the person.

ShortContact person name.A name associated with the person
Control0..1*
TypeHumanName
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Related persons need to be identified by name, but it is uncommon to need details about multiple other names for that person.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. RelatedPerson.address
Definition

Address where the related person can be contacted or visited.

ShortAddress where the related person can be contacted or visited
Control0..0*
TypeAddress(EEBase Address The snapshot does not say whether the constraints on the root of this type profile have been applied to this element, so assume they have not. Check the type profile directly as well)
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

Need to keep track where the related person can be contacted per postal mail or visited.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. RelatedPerson.photo
Definition

Image of the person.

ShortImage of the person
Control0..0*
TypeAttachment
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

Many EHR systems have the capability to capture an image of persons. Fits with newer social media usage too.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. RelatedPerson.period
Definition

The period of time during which this relationship is or was active. If there are no dates defined, then the interval is unknown.

ShortPeriod of time that this relationship is considered valid
Comments

If an individual has a relationship with a patient over multiple, non-adjacent periods, there should be a distinct RelatedPerson instance for each period. For example, if a person is a roommate for a period of time, moves out, and is later a roommate with the same person again, you would have two RelatedPerson instances.

Control10..1
TypePeriod
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. RelatedPerson.communication
Definition

A language which may be used to communicate with the related person about the patient's health.

ShortA language which may be used to communicate with the related person about the patient's health
Comments

If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple RelatedPerson.Communication associations. If the RelatedPerson does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

Control0..0*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

If a related person does not speak the local language, interpreters may be required, so languages spoken and proficiency is an important things to keep track of both for patient and other persons of interest.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

See the documentation on how to interpret the contents of this table

0. RelatedPerson
Definition

Information about a person that is involved in a patient's health or the care for a patient, but who is not the target of healthcare, nor has a formal responsibility in the care process.

ShortA person that is related to a patient, but who is not a direct target of care
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. RelatedPerson.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

Control0..1
Typeid
Is Modifierfalse
Must Supportfalse
Summarytrue
4. RelatedPerson.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. RelatedPerson.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. RelatedPerson.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHALL be taken from AllLanguages
(required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

IETF language tag for a human language

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. RelatedPerson.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
This element is affected by the following invariants: dom-6
TypeNarrative
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. RelatedPerson.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. RelatedPerson.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. RelatedPerson.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. RelatedPerson.identifier
Definition

Identifier for a person within a particular scope.

ShortContact person identifiers.
Comments

RelatedPerson identifiers might not be unique across instances within a system, as a single human individual may be represented as many different RelatedPerson resources with different roles, periods, or relationships.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. RelatedPerson.identifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
22. RelatedPerson.identifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on RelatedPerson.identifier.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
24. RelatedPerson.identifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUse
(required to http://hl7.org/fhir/ValueSet/identifier-use|5.0.0)

Identifies the purpose for this identifier, if known .

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. RelatedPerson.identifier.type
Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

ShortDescription of identifier
Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Control0..1
BindingUnless not suitable, these codes SHALL be taken from IdentifierTypeCodes
(extensible to http://hl7.org/fhir/ValueSet/identifier-type|5.0.0)

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. RelatedPerson.identifier.system
Definition

Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control1..1
BindingUnless not suitable, these codes SHALL be taken from Patsiendi identifikaatorite domeen
(extensible to https://fhir.ee/ValueSet/patsiendi-identifikaatorite-domeen)
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

ExampleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. RelatedPerson.identifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control1..1
This element is affected by the following invariants: ident-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
ExampleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. RelatedPerson.identifier.period
Definition

Time period during which identifier is/was valid for use.

ShortTime period when id is/was valid for use
Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. RelatedPerson.identifier.assigner
Definition

Organization that issued/manages the identifier.

ShortOrganization that issued id (may be just text)
Comments

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Control0..1
TypeReference(Organization)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. RelatedPerson.active
Definition

Whether this related person record is in active use.

ShortWhether this related person's record is in active use
Comments

This element is labeled as a modifier because it may be used to mark that the resource was created in error.

Control1..1
Typeboolean
Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

Need to be able to mark a related person record as not to be used, such as if it was created in error.

Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. RelatedPerson.patient
Definition

The patient this person is related to.

Short(ee Olenevalt doonori tüübist saab seose luua eri aegadel. SIIA VIIDE PATSIENDILE. Patsient võib olla doonor või retsipient.)
Control1..1
TypeReference(Patient: EE VRIS Donor, Patient: EE VRIS Recipient, EE MPI Patient Verified, Patient: EE VRIS Anonymous Patient)
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

We need to know which patient this RelatedPerson is related to.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. RelatedPerson.relationship
Definition

The nature of the relationship between the related person and the patient.

ShortRelationship types, including contact type, personal relationship and donor type.
Comments

The directionality of the relationship is from the RelatedPerson to the Patient. For example, if the Patient is a child, and the RelatedPerson is the mother, the relationship would be PRN (parent) or MTH (mother).

Control1..*
BindingThe codes SHOULD be taken from PatientRelationshipType
(preferred to http://hl7.org/fhir/ValueSet/relatedperson-relationshiptype|5.0.0)

The nature of the relationship between a patient and the related person.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on RelatedPerson.relationship. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ coding.system
42. RelatedPerson.relationship:class
Slice Nameclass
Definition

The nature of the relationship between the related person and the patient.

ShortAssociation or legal relationship between two entities.
Comments

The directionality of the relationship is from the RelatedPerson to the Patient. For example, if the Patient is a child, and the RelatedPerson is the mother, the relationship would be PRN (parent) or MTH (mother).

Control0..*
BindingThe codes SHOULD be taken from PatientRelationshipType
(preferred to http://hl7.org/fhir/ValueSet/relatedperson-relationshiptype|5.0.0)

The nature of the relationship between a patient and the related person.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. RelatedPerson.relationship:class.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
46. RelatedPerson.relationship:class.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on RelatedPerson.relationship.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
48. RelatedPerson.relationship:class.coding
Definition

A reference to a code defined by a terminology system.

ShortCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control0..*
TypeCoding
Is Modifierfalse
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. RelatedPerson.relationship:class.coding.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
52. RelatedPerson.relationship:class.coding.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on RelatedPerson.relationship.coding.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
54. RelatedPerson.relationship:class.coding.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

ShortIdentity of the terminology system
Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.

Control1..1
BindingUnless not suitable, these codes SHALL be taken from RoleClass
(extensible to http://terminology.hl7.org/ValueSet/v3-RoleClass)
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Fixed Value
{
  "system" : "http://terminology.hl7.org/CodeSystem/v3-RoleClass"
}
<system value="http://terminology.hl7.org/CodeSystem/v3-RoleClass"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. RelatedPerson.relationship:class.coding.version
Definition

The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

ShortVersion of the system - if relevant
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

NoteThis is a business version Id, not a resource version Id (see discussion)
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. RelatedPerson.relationship:class.coding.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

ShortSymbol in syntax defined by the system
Control0..1
This element is affected by the following invariants: cod-1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to refer to a particular code in the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. RelatedPerson.relationship:class.coding.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

ShortRepresentation defined by the system
Control0..1
This element is affected by the following invariants: cod-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. RelatedPerson.relationship:class.coding.userSelected
Definition

Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

ShortIf this coding was chosen directly by the user
Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. RelatedPerson.relationship:class.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

ShortPlain text representation of the concept
Comments

Very often the text is the same as a displayName of one of the codings.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. RelatedPerson.relationship:person
Slice Nameperson
Definition

The nature of the relationship between the related person and the patient.

ShortSocial relation to the patient
Comments

The directionality of the relationship is from the RelatedPerson to the Patient. For example, if the Patient is a child, and the RelatedPerson is the mother, the relationship would be PRN (parent) or MTH (mother).

Control0..*
BindingThe codes SHOULD be taken from PatientRelationshipType
(preferred to http://hl7.org/fhir/ValueSet/relatedperson-relationshiptype|5.0.0)

The nature of the relationship between a patient and the related person.

TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. RelatedPerson.relationship:person.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
70. RelatedPerson.relationship:person.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on RelatedPerson.relationship.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
72. RelatedPerson.relationship:person.coding
Definition

A reference to a code defined by a terminology system.

ShortCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control0..*
TypeCoding
Is Modifierfalse
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. RelatedPerson.relationship:person.coding.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
This element is affected by the following invariants: ele-1
Typeid
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
76. RelatedPerson.relationship:person.coding.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on RelatedPerson.relationship.coding.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
78. RelatedPerson.relationship:person.coding.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

ShortIdentity of the terminology system
Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.

Control1..1
BindingUnless not suitable, these codes SHALL be taken from Isiku seos patsiendiga
(extensible to https://fhir.ee/ValueSet/isiku-seos-patsiendiga)
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Fixed Value
{
  "system" : "http://snomed.info/sct"
}
<system value="http://snomed.info/sct"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
80. RelatedPerson.relationship:person.coding.version
Definition

The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

ShortVersion of the system - if relevant
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

NoteThis is a business version Id, not a resource version Id (see discussion)
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
82. RelatedPerson.relationship:person.coding.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

ShortSymbol in syntax defined by the system
Control0..1
This element is affected by the following invariants: cod-1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to refer to a particular code in the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. RelatedPerson.relationship:person.coding.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

ShortRepresentation defined by the system
Control0..1
This element is affected by the following invariants: cod-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. RelatedPerson.relationship:person.coding.userSelected
Definition

Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

ShortIf this coding was chosen directly by the user
Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. RelatedPerson.relationship:person.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

ShortPlain text representation of the concept
Comments

Very often the text is the same as a displayName of one of the codings.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. RelatedPerson.relationship:donortype
Slice Namedonortype
Definition

Specifies the relationship between recipient and donor. (mitt-partnerannetaja, partnerannetaja jne)

ShortSpecifies the relationship between recipient and donor. (ee |Partnerannetaja|Anonüümne doonor||Mitteparnerist doonor| NB! LOENDIT vaja!)
Comments

The directionality of the relationship is from the RelatedPerson to the Patient. For example, if the Patient is a child, and the RelatedPerson is the mother, the relationship would be PRN (parent) or MTH (mother).

Control0..1
BindingThe codes SHALL be taken from https://fhir.ee/ValueSet/vris-doonori-tyyp
(required to https://fhir.ee/ValueSet/vris-doonori-tyyp)
TypeCodeableConcept
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. RelatedPerson.name
Definition

A name associated with the person.

ShortContact person name.
Control0..1
TypeHumanName
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Related persons need to be identified by name, but it is uncommon to need details about multiple other names for that person.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. RelatedPerson.telecom
Definition

A contact detail for the person, e.g. a telephone number or an email address.

ShortA contact detail for the person
Comments

Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

Control0..*
TypeContactPoint
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

People have (primary) ways to contact them in some way such as phone, email.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
96. RelatedPerson.gender
Definition

Administrative Gender - the gender that the person is considered to have for administration and record keeping purposes.

Shortmale | female | other | unknown
Control0..1
BindingThe codes SHALL be taken from AdministrativeGender
(required to http://hl7.org/fhir/ValueSet/administrative-gender|5.0.0)

The gender of a person used for administrative purposes.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

Needed for identification of the person, in combination with (at least) name and birth date.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
98. RelatedPerson.birthDate
Definition

The date on which the related person was born.

ShortThe date on which the related person was born
Control0..1
Typedate
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. RelatedPerson.address
Definition

Address where the related person can be contacted or visited.

ShortAddress where the related person can be contacted or visited
Control0..0
TypeAddress(EEBase Address The snapshot does not say whether the constraints on the root of this type profile have been applied to this element, so assume they have not. Check the type profile directly as well)
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

Need to keep track where the related person can be contacted per postal mail or visited.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. RelatedPerson.photo
Definition

Image of the person.

ShortImage of the person
Control0..0
TypeAttachment
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

Many EHR systems have the capability to capture an image of persons. Fits with newer social media usage too.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. RelatedPerson.period
Definition

The period of time during which this relationship is or was active. If there are no dates defined, then the interval is unknown.

ShortPeriod of time that this relationship is considered valid
Comments

If an individual has a relationship with a patient over multiple, non-adjacent periods, there should be a distinct RelatedPerson instance for each period. For example, if a person is a roommate for a period of time, moves out, and is later a roommate with the same person again, you would have two RelatedPerson instances.

Control1..1
TypePeriod
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. RelatedPerson.communication
Definition

A language which may be used to communicate with the related person about the patient's health.

ShortA language which may be used to communicate with the related person about the patient's health
Comments

If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple RelatedPerson.Communication associations. If the RelatedPerson does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

Control0..0
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

If a related person does not speak the local language, interpreters may be required, so languages spoken and proficiency is an important things to keep track of both for patient and other persons of interest.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))