Specyfikacja interoperacyjności prototypu SSIDL
0.1.1 - ci-build
Specyfikacja interoperacyjności prototypu SSIDL, published by Uniwersytet Medyczny w Łodzi. This guide is not an authorized publication; it is the continuous build for version 0.1.1 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/SSIDL/ssidl-ig/ and changes regularly. See the Directory of published versions
Draft as of 2025-08-28 |
Definitions for the ssidl-location-laboratory resource profile.
Guidance on how to interpret the contents of this table can be foundhere
0. Location | |
Definition | Details and position information for a place where services are provided and resources and participants may be stored, found, contained, or accommodated. |
Short | Details and position information for a place |
Control | 0..* |
Is Modifier | false |
Must Support | false |
Summary | false |
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists()) |
2. Location.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Short | A set of rules under which this content was created |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc. |
Control | 0..1 |
Type | uri |
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
4. Location.contained | |
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning. |
Short | Contained, inline Resources |
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels. |
Control | 0..* This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5 |
Type | Resource |
Is Modifier | false |
Must Support | false |
Summary | false |
Alternate Names | inline resources, anonymous resources, contained resources |
6. Location.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them |
Must Support | false |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
8. Location.identifier | |
Definition | Unique code or number identifying the location to its users. |
Short | Unique code or number identifying the location to its users |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 10..1* |
Type | Identifier |
Is Modifier | false |
Must Support | true |
Summary | true |
Requirements | Organization label locations in registries, need to keep track of those. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
10. Location.identifier.use | |
Definition | The purpose of this identifier. |
Short | usual | official | temp | secondary | old (If known) |
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. |
Control | 0..01 |
Binding | The codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|5.0.0 (required to http://hl7.org/fhir/ValueSet/identifier-use|5.0.0 )Identifies the purpose for this identifier, if known . |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
12. Location.identifier.type | |
Definition | A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. |
Short | Description of identifier |
Comments | This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. |
Control | 0..01 |
Binding | Unless not suitable, these codes SHALL be taken from IdentifierTypeCodeshttp://hl7.org/fhir/ValueSet/identifier-type (extensible to http://hl7.org/fhir/ValueSet/identifier-type )A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. |
Type | CodeableConcept |
Is Modifier | false |
Summary | true |
Requirements | Allows users to make use of identifiers when the identifier system is not known. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
14. Location.identifier.system | |
Definition | Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique. |
Short | The namespace for the identifier value |
Comments | Identifier.system is always case sensitive. |
Control | 10..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. |
Example | General: http://www.acme.com/identifiers/patient |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
16. Location.identifier.value | |
Definition | The portion of the identifier typically relevant to the user and which is unique within the context of the system. |
Short | The value that is unique |
Comments | If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. |
Control | 10..1 This element is affected by the following invariants: ident-1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Example | General: 123456 |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
18. Location.identifier.period | |
Definition | Time period during which identifier is/was valid for use. |
Short | Time period when id is/was valid for use |
Control | 0..01 |
Type | Period |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
20. Location.identifier.assigner | |
Definition | Organization that issued/manages the identifier. |
Short | Organization that issued id (may be just text) |
Comments | The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. |
Control | 0..01 |
Type | Reference(Organization) |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
22. Location.status | |
Definition | The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location. |
Short | active | suspended | inactive |
Control | 0..01 |
Binding | The codes SHALL be taken from LocationStatushttp://hl7.org/fhir/ValueSet/location-status|5.0.0 (required to http://hl7.org/fhir/ValueSet/location-status|5.0.0 )Indicates whether the location is still in use. |
Type | code |
Is Modifier | true because This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
24. Location.operationalStatus | |
Definition | The operational status covers operation values most relevant to beds (but can also apply to rooms/units/chairs/etc. such as an isolation unit/dialysis chair). This typically covers concepts such as contamination, housekeeping, and other activities like maintenance. |
Short | The operational status of the location (typically only for a bed/room) |
Control | 0..01 |
Binding | The codes SHOULD be taken from hl7VS-bedStatushttp://terminology.hl7.org/ValueSet/v2-0116 (preferred to http://terminology.hl7.org/ValueSet/v2-0116 )The operational status if the location (where typically a bed/room). |
Type | Coding |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
26. Location.name | |
Definition | Name of the location as used by humans. Does not need to be unique. |
Short | Name of the location as used by humans |
Comments | If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches. |
Control | 10..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
28. Location.description | |
Definition | Description of the Location, which helps in finding or referencing the place. |
Short | Additional details about the location that could be displayed as further information to identify the location beyond its name |
Control | 0..01 |
Type | markdown |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | true |
Requirements | Humans need additional information to verify a correct location has been identified. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
30. Location.mode | |
Definition | Indicates whether a resource instance represents a specific location or a class of locations. |
Short | instance | kind |
Comments | This is labeled as a modifier because whether or not the location is a class of locations changes how it can be used and understood. |
Control | 10..1 |
Binding | The codes SHALL be taken from LocationModehttp://hl7.org/fhir/ValueSet/location-mode|5.0.0 (required to http://hl7.org/fhir/ValueSet/location-mode|5.0.0 )Indicates whether a resource instance represents a specific location or a class of locations. |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | When using a Location resource for scheduling or orders, we need to be able to refer to a class of Locations instead of a specific Location. |
Pattern Value | instance |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
32. Location.type | |
Definition | Indicates the type of function performed at the location. |
Short | Type of function performed |
Control | 10..1* |
Binding | The codes SHALL be taken from Unless not suitable, these codes SHALL be taken from Kod rodzaju placówki laboratoryjnejhttp://terminology.hl7.org/ValueSet/v3-ServiceDeliveryLocationRoleType (required to http://loinc-ssidl.umed.pl/fhir/ig/ssidl/ValueSet/pl-lab-serviceProviderType-VS ) |
Type | CodeableConcept |
Is Modifier | false |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
34. Location.type.coding | |
Definition | A reference to a code defined by a terminology system. |
Short | Code defined by a terminology system |
Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. |
Control | 10..1* |
Type | Coding |
Is Modifier | false |
Must Support | true |
Summary | true |
Requirements | Allows for alternative encodings within a code system, and translations to other code systems. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
36. Location.type.coding.system | |
Definition | The identification of the code system that defines the meaning of the symbol in the code. |
Short | Identity of the terminology system |
Comments | The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously. |
Control | 10..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Need to be unambiguous about the source of the definition of the symbol. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
38. Location.type.coding.version | |
Definition | The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. |
Short | Version of the system - if relevant |
Comments | Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. |
Note | This is a business version Id, not a resource version Id (see discussion) |
Control | 0..01 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
40. Location.type.coding.code | |
Definition | A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). |
Short | Symbol in syntax defined by the system |
Control | 10..1 This element is affected by the following invariants: cod-1 |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Need to refer to a particular code in the system. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
42. Location.type.coding.display | |
Definition | A representation of the meaning of the code in the system, following the rules of the system. |
Short | Representation defined by the system |
Control | 10..1 This element is affected by the following invariants: cod-1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Need to be able to carry a human-readable meaning of the code for readers that do not know the system. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
44. Location.type.coding.userSelected | |
Definition | Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). |
Short | If this coding was chosen directly by the user |
Comments | Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. |
Control | 0..01 |
Type | boolean |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
46. Location.type.text | |
Definition | A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. |
Short | Plain text representation of the concept |
Comments | Very often the text is the same as a displayName of one of the codings. |
Control | 0..01 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
48. Location.contact | |
Definition | The contact details of communication devices available at the location. This can include addresses, phone numbers, fax numbers, mobile numbers, email addresses and web sites. |
Short | Official contact details for the location |
Comments | The address/telecom use code 'home' are not to be used. Note that these contacts are not the contact details of people who provide the service (that would be through PractitionerRole), these are official contacts for the Healthcare itself for specific purposes. E.g. Mailing Addresses, Billing Addresses, Contact numbers for Booking or Billing Enquiries, general web address, web address for online bookings etc. If this is empty (or the type of interest is empty), refer to the organization's contacts. |
Control | 0..1* |
Type | ExtendedContactDetail |
Is Modifier | false |
Must Support | true |
Summary | false |
Requirements | Need to keep track of both simple contact details and also assigned contacts within larger organizations. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
50. Location.contact.telecom | |
Definition | The contact details application for the purpose defined. |
Short | Contact details (e.g.phone/fax/url) |
Control | 0..* |
Type | ContactPoint |
Is Modifier | false |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on Location.contact.telecom . The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
52. Location.contact.telecom:phone | |
Slice Name | phone |
Definition | The contact details application for the purpose defined. |
Short | Contact details (e.g.phone/fax/url) |
Control | 0..* |
Type | ContactPoint |
Is Modifier | false |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
54. Location.contact.telecom:phone.system | |
Definition | Telecommunications form for contact point - what communications system is required to make use of the contact. |
Short | phone | fax | email | pager | url | sms | other |
Control | 10..1 This element is affected by the following invariants: cpt-2 |
Binding | The codes SHALL be taken from ContactPointSystemhttp://hl7.org/fhir/ValueSet/contact-point-system|5.0.0 (required to http://hl7.org/fhir/ValueSet/contact-point-system|5.0.0 )Telecommunications form for contact point. |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Pattern Value | phone |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
56. Location.contact.telecom:phone.value | |
Definition | The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address). |
Short | The actual contact point details |
Comments | Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value. |
Control | 10..1 This element is affected by the following invariants: cpt-2 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Need to support legacy numbers that are not in a tightly controlled format. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
58. Location.contact.telecom:phone.use | |
Definition | Identifies the purpose for the contact point. |
Short | home | work | temp | old | mobile - purpose of this contact point |
Comments | Applications can assume that a contact is current unless it explicitly says that it is temporary or old. |
Control | 0..01 |
Binding | The codes SHALL be taken from ContactPointUsehttp://hl7.org/fhir/ValueSet/contact-point-use|5.0.0 (required to http://hl7.org/fhir/ValueSet/contact-point-use|5.0.0 )Use of contact point. |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
60. Location.contact.telecom:phone.rank | |
Definition | Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values. |
Short | Specify preferred order of use (1 = highest) |
Comments | Note that rank does not necessarily follow the order in which the contacts are represented in the instance. Ranks need not be unique. E.g. it's possible to have multiple contacts with rank=1. If the ranks have different systems or uses, this would be interpreted to mean "X is my most preferred phone number, Y is my most preferred email address" or "X is my preferred home email and Y is my preferred work email". If the system and use for equally-ranked contacts are the same, then the level of preference is equivalent for both repetitions. Ranks need not be sequential and not all repetitions must have a rank. For example, it's possible to have 4 contacts with ranks of 2, 5 and two with no rank specified. That would be interpreted to mean the first is preferred over the second and no preference stated for the remaining contacts. |
Control | 0..01 |
Type | positiveInt |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
62. Location.contact.telecom:phone.period | |
Definition | Time period when the contact point was/is in use. |
Short | Time period when the contact point was/is in use |
Control | 0..01 |
Type | Period |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
64. Location.contact.telecom:email | |
Slice Name | |
Definition | The contact details application for the purpose defined. |
Short | Contact details (e.g.phone/fax/url) |
Control | 0..* |
Type | ContactPoint |
Is Modifier | false |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
66. Location.contact.telecom:email.system | |
Definition | Telecommunications form for contact point - what communications system is required to make use of the contact. |
Short | phone | fax | email | pager | url | sms | other |
Control | 10..1 This element is affected by the following invariants: cpt-2 |
Binding | The codes SHALL be taken from ContactPointSystemhttp://hl7.org/fhir/ValueSet/contact-point-system|5.0.0 (required to http://hl7.org/fhir/ValueSet/contact-point-system|5.0.0 )Telecommunications form for contact point. |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Pattern Value | email |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
68. Location.contact.telecom:email.value | |
Definition | The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address). |
Short | The actual contact point details |
Comments | Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value. |
Control | 10..1 This element is affected by the following invariants: cpt-2 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Need to support legacy numbers that are not in a tightly controlled format. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
70. Location.contact.telecom:email.use | |
Definition | Identifies the purpose for the contact point. |
Short | home | work | temp | old | mobile - purpose of this contact point |
Comments | Applications can assume that a contact is current unless it explicitly says that it is temporary or old. |
Control | 0..01 |
Binding | The codes SHALL be taken from ContactPointUsehttp://hl7.org/fhir/ValueSet/contact-point-use|5.0.0 (required to http://hl7.org/fhir/ValueSet/contact-point-use|5.0.0 )Use of contact point. |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
72. Location.contact.telecom:email.rank | |
Definition | Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values. |
Short | Specify preferred order of use (1 = highest) |
Comments | Note that rank does not necessarily follow the order in which the contacts are represented in the instance. Ranks need not be unique. E.g. it's possible to have multiple contacts with rank=1. If the ranks have different systems or uses, this would be interpreted to mean "X is my most preferred phone number, Y is my most preferred email address" or "X is my preferred home email and Y is my preferred work email". If the system and use for equally-ranked contacts are the same, then the level of preference is equivalent for both repetitions. Ranks need not be sequential and not all repetitions must have a rank. For example, it's possible to have 4 contacts with ranks of 2, 5 and two with no rank specified. That would be interpreted to mean the first is preferred over the second and no preference stated for the remaining contacts. |
Control | 0..01 |
Type | positiveInt |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
74. Location.contact.telecom:email.period | |
Definition | Time period when the contact point was/is in use. |
Short | Time period when the contact point was/is in use |
Control | 0..01 |
Type | Period |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
76. Location.address | |
Definition | Physical location. |
Short | Physical location |
Comments | Additional addresses should be recorded using another instance of the Location resource, or via the Organization. |
Control | 0..1 |
Type | Address |
Is Modifier | false |
Must Support | true |
Summary | false |
Requirements | If locations can be visited, we need to keep track of their address. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
78. Location.form | |
Definition | Physical form of the location, e.g. building, room, vehicle, road, virtual. |
Short | Physical form of the location |
Control | 0..01 |
Binding | For example codes, see LocationFormhttp://hl7.org/fhir/ValueSet/location-form (example to http://hl7.org/fhir/ValueSet/location-form )Physical form of the location. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | true |
Requirements | For purposes of showing relevant locations in queries, we need to categorize locations. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
80. Location.position | |
Definition | The absolute geographic location of the Location, expressed using the WGS84 datum (This is the same co-ordinate system used in KML). |
Short | The absolute geographic location |
Comments | To define a boundary shape for this location use the standard extension |
Control | 0..01 |
Type | BackboneElement |
Is Modifier | false |
Must Support | false |
Summary | false |
Requirements | For mobile applications and automated route-finding knowing the exact location of the Location is required. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
85. Location.managingOrganization | |
Definition | The organization responsible for the provisioning and upkeep of the location. |
Short | Organization responsible for provisioning and upkeep |
Comments | This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource. |
Control | 10..1 |
Type | Reference(Podmiot diagnostyczny (SSIDL), Organization) |
Is Modifier | false |
Must Support | true |
Summary | true |
Requirements | Need to know who manages the location. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
87. Location.partOf | |
Definition | Another Location of which this Location is physically a part of. |
Short | Another Location this one is physically a part of |
Control | 0..01 |
Type | Reference(Location) |
Is Modifier | false |
Must Support | false |
Summary | false |
Requirements | For purposes of location, display and identification, knowing which locations are located within other locations is important. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
89. Location.characteristic | |
Definition | Collection of characteristics (attributes). |
Short | Collection of characteristics (attributes) |
Comments | These could be such things as is wheelchair accessible. |
Control | 0..0* |
Binding | For example codes, see LocationCharacteristichttp://hl7.org/fhir/ValueSet/location-characteristic (example to http://hl7.org/fhir/ValueSet/location-characteristic )A custom attribute that could be provided at a service (e.g. Wheelchair accessibiliy). |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
91. Location.virtualService | |
Definition | Connection details of a virtual service (e.g. shared conference call facility with dedicated number/details). |
Short | Connection details of a virtual service (e.g. conference call) |
Comments | There are two types of virtual meetings that often exist:
Implementers may consider using Appointment.virtualService for virtual meeting rooms that are generated on-demand. |
Control | 0..0* |
Type | VirtualServiceDetail |
Is Modifier | false |
Must Support | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
93. Location.endpoint | |
Definition | Technical endpoints providing access to services operated for the location. |
Short | Technical endpoints providing access to services operated for the location |
Control | 0..0* |
Type | Reference(Endpoint) |
Is Modifier | false |
Must Support | false |
Summary | false |
Requirements | Organizations may have different systems at different locations that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be foundhere
0. Location | |
2. Location.identifier | |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 1..1 |
Must Support | true |
4. Location.identifier.use | |
Control | 0..0 |
6. Location.identifier.type | |
Control | 0..0 |
8. Location.identifier.system | |
Control | 1..? |
Must Support | true |
10. Location.identifier.value | |
Control | 1..? |
Must Support | true |
12. Location.identifier.period | |
Control | 0..0 |
14. Location.identifier.assigner | |
Control | 0..0 |
16. Location.status | |
Control | 0..0 |
18. Location.operationalStatus | |
Control | 0..0 |
20. Location.name | |
Control | 1..? |
Must Support | true |
22. Location.description | |
Control | 0..0 |
24. Location.mode | |
Control | 1..? |
Must Support | true |
Pattern Value | instance |
26. Location.type | |
Control | 1..1 |
Binding | The codes SHALL be taken from Kod rodzaju placówki laboratoryjnej (required to http://loinc-ssidl.umed.pl/fhir/ig/ssidl/ValueSet/pl-lab-serviceProviderType-VS ) |
Must Support | true |
28. Location.type.coding | |
Control | 1..1 |
Must Support | true |
30. Location.type.coding.system | |
Control | 1..? |
Must Support | true |
32. Location.type.coding.version | |
Note | This is a business version Id, not a resource version Id (see discussion) |
Control | 0..0 |
34. Location.type.coding.code | |
Control | 1..? |
Must Support | true |
36. Location.type.coding.display | |
Control | 1..? |
Must Support | true |
38. Location.type.coding.userSelected | |
Control | 0..0 |
40. Location.type.text | |
Control | 0..0 |
42. Location.contact | |
Control | 0..1 |
Must Support | true |
44. Location.contact.telecom | |
Must Support | true |
Slicing | This element introduces a set of slices on Location.contact.telecom . The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
46. Location.contact.telecom:phone | |
Slice Name | phone |
Control | 0..* |
Must Support | true |
48. Location.contact.telecom:phone.system | |
Control | 1..? |
Must Support | true |
Pattern Value | phone |
50. Location.contact.telecom:phone.value | |
Control | 1..? |
Must Support | true |
52. Location.contact.telecom:phone.use | |
Control | 0..0 |
54. Location.contact.telecom:phone.rank | |
Control | 0..0 |
56. Location.contact.telecom:phone.period | |
Control | 0..0 |
58. Location.contact.telecom:email | |
Slice Name | |
Control | 0..* |
Must Support | true |
60. Location.contact.telecom:email.system | |
Control | 1..? |
Must Support | true |
Pattern Value | email |
62. Location.contact.telecom:email.value | |
Control | 1..? |
Must Support | true |
64. Location.contact.telecom:email.use | |
Control | 0..0 |
66. Location.contact.telecom:email.rank | |
Control | 0..0 |
68. Location.contact.telecom:email.period | |
Control | 0..0 |
70. Location.address | |
Must Support | true |
72. Location.form | |
Control | 0..0 |
74. Location.position | |
Control | 0..0 |
76. Location.managingOrganization | |
Control | 1..? |
Type | Reference(Podmiot diagnostyczny (SSIDL)) |
Must Support | true |
78. Location.partOf | |
Control | 0..0 |
80. Location.characteristic | |
Control | 0..0 |
82. Location.virtualService | |
Control | 0..0 |
84. Location.endpoint | |
Control | 0..0 |
Guidance on how to interpret the contents of this table can be foundhere
0. Location | |
Definition | Details and position information for a place where services are provided and resources and participants may be stored, found, contained, or accommodated. |
Short | Details and position information for a place |
Control | 0..* |
Is Modifier | false |
Must Support | false |
Summary | false |
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty() )dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource ( contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty() )dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated ( contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() )dom-5: If a resource is contained in another resource, it SHALL NOT have a security label ( contained.meta.security.empty() )dom-6: A resource should have narrative for robust management ( text.`div`.exists() ) |
2. Location.id | |
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. |
Short | Logical id of this artifact |
Comments | Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case. |
Control | 0..1 |
Type | id |
Is Modifier | false |
Must Support | false |
Summary | true |
4. Location.meta | |
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. |
Short | Metadata about the resource |
Control | 0..1 |
Type | Meta |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
6. Location.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Short | A set of rules under which this content was created |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc. |
Control | 0..1 |
Type | uri |
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
8. Location.language | |
Definition | The base language in which the resource is written. |
Short | Language of the resource content |
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). |
Control | 0..1 |
Binding | The codes SHALL be taken from AllLanguages (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0 )IETF language tag for a human language |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
10. Location.text | |
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. |
Short | Text summary of the resource, for human interpretation |
Comments | Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. |
Control | 0..1 This element is affected by the following invariants: dom-6 |
Type | Narrative |
Is Modifier | false |
Must Support | false |
Summary | false |
Alternate Names | narrative, html, xhtml, display |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
12. Location.contained | |
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning. |
Short | Contained, inline Resources |
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels. |
Control | 0..* This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5 |
Type | Resource |
Is Modifier | false |
Must Support | false |
Summary | false |
Alternate Names | inline resources, anonymous resources, contained resources |
14. Location.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Must Support | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
16. Location.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them |
Must Support | false |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
18. Location.identifier | |
Definition | Unique code or number identifying the location to its users. |
Short | Unique code or number identifying the location to its users |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 1..1 |
Type | Identifier |
Is Modifier | false |
Must Support | true |
Summary | true |
Requirements | Organization label locations in registries, need to keep track of those. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
20. Location.identifier.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
22. Location.identifier.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Location.identifier.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
24. Location.identifier.use | |
Definition | The purpose of this identifier. |
Short | usual | official | temp | secondary | old (If known) |
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. |
Control | 0..0 |
Binding | The codes SHALL be taken from IdentifierUse (required to http://hl7.org/fhir/ValueSet/identifier-use|5.0.0 )Identifies the purpose for this identifier, if known . |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
26. Location.identifier.type | |
Definition | A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. |
Short | Description of identifier |
Comments | This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. |
Control | 0..0 |
Binding | Unless not suitable, these codes SHALL be taken from IdentifierTypeCodes (extensible to http://hl7.org/fhir/ValueSet/identifier-type )A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. |
Type | CodeableConcept |
Is Modifier | false |
Summary | true |
Requirements | Allows users to make use of identifiers when the identifier system is not known. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
28. Location.identifier.system | |
Definition | Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique. |
Short | The namespace for the identifier value |
Comments | Identifier.system is always case sensitive. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. |
Example | General: http://www.acme.com/identifiers/patient |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
30. Location.identifier.value | |
Definition | The portion of the identifier typically relevant to the user and which is unique within the context of the system. |
Short | The value that is unique |
Comments | If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. |
Control | 1..1 This element is affected by the following invariants: ident-1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Example | General: 123456 |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
32. Location.identifier.period | |
Definition | Time period during which identifier is/was valid for use. |
Short | Time period when id is/was valid for use |
Control | 0..0 |
Type | Period |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
34. Location.identifier.assigner | |
Definition | Organization that issued/manages the identifier. |
Short | Organization that issued id (may be just text) |
Comments | The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. |
Control | 0..0 |
Type | Reference(Organization) |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
36. Location.status | |
Definition | The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location. |
Short | active | suspended | inactive |
Control | 0..0 |
Binding | The codes SHALL be taken from LocationStatus (required to http://hl7.org/fhir/ValueSet/location-status|5.0.0 )Indicates whether the location is still in use. |
Type | code |
Is Modifier | true because This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
38. Location.operationalStatus | |
Definition | The operational status covers operation values most relevant to beds (but can also apply to rooms/units/chairs/etc. such as an isolation unit/dialysis chair). This typically covers concepts such as contamination, housekeeping, and other activities like maintenance. |
Short | The operational status of the location (typically only for a bed/room) |
Control | 0..0 |
Binding | The codes SHOULD be taken from hl7VS-bedStatus (preferred to http://terminology.hl7.org/ValueSet/v2-0116 )The operational status if the location (where typically a bed/room). |
Type | Coding |
Is Modifier | false |
Must Support | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
40. Location.name | |
Definition | Name of the location as used by humans. Does not need to be unique. |
Short | Name of the location as used by humans |
Comments | If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches. |
Control | 1..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
42. Location.alias | |
Definition | A list of alternate names that the location is known as, or was known as, in the past. |
Short | A list of alternate names that the location is known as, or was known as, in the past |
Comments | There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the location. |
Control | 0..* |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | false |
Requirements | Over time locations and organizations go through many changes and can be known by different names. For searching knowing previous names that the location was known by can be very useful. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
44. Location.description | |
Definition | Description of the Location, which helps in finding or referencing the place. |
Short | Additional details about the location that could be displayed as further information to identify the location beyond its name |
Control | 0..0 |
Type | markdown |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | false |
Summary | true |
Requirements | Humans need additional information to verify a correct location has been identified. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
46. Location.mode | |
Definition | Indicates whether a resource instance represents a specific location or a class of locations. |
Short | instance | kind |
Comments | This is labeled as a modifier because whether or not the location is a class of locations changes how it can be used and understood. |
Control | 1..1 |
Binding | The codes SHALL be taken from LocationMode (required to http://hl7.org/fhir/ValueSet/location-mode|5.0.0 )Indicates whether a resource instance represents a specific location or a class of locations. |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | When using a Location resource for scheduling or orders, we need to be able to refer to a class of Locations instead of a specific Location. |
Pattern Value | instance |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
48. Location.type | |
Definition | Indicates the type of function performed at the location. |
Short | Type of function performed |
Control | 1..1 |
Binding | The codes SHALL be taken from Kod rodzaju placówki laboratoryjnej (required to http://loinc-ssidl.umed.pl/fhir/ig/ssidl/ValueSet/pl-lab-serviceProviderType-VS ) |
Type | CodeableConcept |
Is Modifier | false |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
50. Location.type.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
52. Location.type.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Location.type.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
54. Location.type.coding | |
Definition | A reference to a code defined by a terminology system. |
Short | Code defined by a terminology system |
Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. |
Control | 1..1 |
Type | Coding |
Is Modifier | false |
Must Support | true |
Summary | true |
Requirements | Allows for alternative encodings within a code system, and translations to other code systems. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
56. Location.type.coding.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
58. Location.type.coding.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Location.type.coding.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
60. Location.type.coding.system | |
Definition | The identification of the code system that defines the meaning of the symbol in the code. |
Short | Identity of the terminology system |
Comments | The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Need to be unambiguous about the source of the definition of the symbol. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
62. Location.type.coding.version | |
Definition | The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. |
Short | Version of the system - if relevant |
Comments | Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. |
Note | This is a business version Id, not a resource version Id (see discussion) |
Control | 0..0 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
64. Location.type.coding.code | |
Definition | A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). |
Short | Symbol in syntax defined by the system |
Control | 1..1 This element is affected by the following invariants: cod-1 |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Need to refer to a particular code in the system. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
66. Location.type.coding.display | |
Definition | A representation of the meaning of the code in the system, following the rules of the system. |
Short | Representation defined by the system |
Control | 1..1 This element is affected by the following invariants: cod-1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Need to be able to carry a human-readable meaning of the code for readers that do not know the system. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
68. Location.type.coding.userSelected | |
Definition | Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). |
Short | If this coding was chosen directly by the user |
Comments | Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. |
Control | 0..0 |
Type | boolean |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
70. Location.type.text | |
Definition | A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. |
Short | Plain text representation of the concept |
Comments | Very often the text is the same as a displayName of one of the codings. |
Control | 0..0 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
72. Location.contact | |
Definition | The contact details of communication devices available at the location. This can include addresses, phone numbers, fax numbers, mobile numbers, email addresses and web sites. |
Short | Official contact details for the location |
Comments | The address/telecom use code 'home' are not to be used. Note that these contacts are not the contact details of people who provide the service (that would be through PractitionerRole), these are official contacts for the Healthcare itself for specific purposes. E.g. Mailing Addresses, Billing Addresses, Contact numbers for Booking or Billing Enquiries, general web address, web address for online bookings etc. If this is empty (or the type of interest is empty), refer to the organization's contacts. |
Control | 0..1 |
Type | ExtendedContactDetail |
Is Modifier | false |
Must Support | true |
Summary | false |
Requirements | Need to keep track of both simple contact details and also assigned contacts within larger organizations. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
74. Location.contact.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
76. Location.contact.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Location.contact.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
78. Location.contact.purpose | |
Definition | The purpose/type of contact. |
Short | The type of contact |
Comments | If no purpose is defined, then these contact details may be used for any purpose. |
Control | 0..1 |
Binding | The codes SHOULD be taken from Contact entity type (preferred to http://terminology.hl7.org/ValueSet/contactentity-type )The purpose for which an extended contact detail should be used. |
Type | CodeableConcept |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
80. Location.contact.name | |
Definition | The name of an individual to contact, some types of contact detail are usually blank. |
Short | Name of an individual to contact |
Comments | If there is no named individual, the telecom/address information is not generally monitored by a specific individual. |
Control | 0..* |
Type | HumanName |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
82. Location.contact.telecom | |
Definition | The contact details application for the purpose defined. |
Short | Contact details (e.g.phone/fax/url) |
Control | 0..* |
Type | ContactPoint |
Is Modifier | false |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
Slicing | This element introduces a set of slices on Location.contact.telecom . The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
84. Location.contact.telecom:phone | |
Slice Name | phone |
Definition | The contact details application for the purpose defined. |
Short | Contact details (e.g.phone/fax/url) |
Control | 0..* |
Type | ContactPoint |
Is Modifier | false |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
86. Location.contact.telecom:phone.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
88. Location.contact.telecom:phone.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Location.contact.telecom.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
90. Location.contact.telecom:phone.system | |
Definition | Telecommunications form for contact point - what communications system is required to make use of the contact. |
Short | phone | fax | email | pager | url | sms | other |
Control | 1..1 This element is affected by the following invariants: cpt-2 |
Binding | The codes SHALL be taken from ContactPointSystem (required to http://hl7.org/fhir/ValueSet/contact-point-system|5.0.0 )Telecommunications form for contact point. |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Pattern Value | phone |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
92. Location.contact.telecom:phone.value | |
Definition | The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address). |
Short | The actual contact point details |
Comments | Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value. |
Control | 1..1 This element is affected by the following invariants: cpt-2 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Need to support legacy numbers that are not in a tightly controlled format. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
94. Location.contact.telecom:phone.use | |
Definition | Identifies the purpose for the contact point. |
Short | home | work | temp | old | mobile - purpose of this contact point |
Comments | Applications can assume that a contact is current unless it explicitly says that it is temporary or old. |
Control | 0..0 |
Binding | The codes SHALL be taken from ContactPointUse (required to http://hl7.org/fhir/ValueSet/contact-point-use|5.0.0 )Use of contact point. |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
96. Location.contact.telecom:phone.rank | |
Definition | Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values. |
Short | Specify preferred order of use (1 = highest) |
Comments | Note that rank does not necessarily follow the order in which the contacts are represented in the instance. Ranks need not be unique. E.g. it's possible to have multiple contacts with rank=1. If the ranks have different systems or uses, this would be interpreted to mean "X is my most preferred phone number, Y is my most preferred email address" or "X is my preferred home email and Y is my preferred work email". If the system and use for equally-ranked contacts are the same, then the level of preference is equivalent for both repetitions. Ranks need not be sequential and not all repetitions must have a rank. For example, it's possible to have 4 contacts with ranks of 2, 5 and two with no rank specified. That would be interpreted to mean the first is preferred over the second and no preference stated for the remaining contacts. |
Control | 0..0 |
Type | positiveInt |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
98. Location.contact.telecom:phone.period | |
Definition | Time period when the contact point was/is in use. |
Short | Time period when the contact point was/is in use |
Control | 0..0 |
Type | Period |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
100. Location.contact.telecom:email | |
Slice Name | |
Definition | The contact details application for the purpose defined. |
Short | Contact details (e.g.phone/fax/url) |
Control | 0..* |
Type | ContactPoint |
Is Modifier | false |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
102. Location.contact.telecom:email.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
104. Location.contact.telecom:email.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Location.contact.telecom.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
106. Location.contact.telecom:email.system | |
Definition | Telecommunications form for contact point - what communications system is required to make use of the contact. |
Short | phone | fax | email | pager | url | sms | other |
Control | 1..1 This element is affected by the following invariants: cpt-2 |
Binding | The codes SHALL be taken from ContactPointSystem (required to http://hl7.org/fhir/ValueSet/contact-point-system|5.0.0 )Telecommunications form for contact point. |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Pattern Value | email |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
108. Location.contact.telecom:email.value | |
Definition | The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address). |
Short | The actual contact point details |
Comments | Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value. |
Control | 1..1 This element is affected by the following invariants: cpt-2 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Need to support legacy numbers that are not in a tightly controlled format. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
110. Location.contact.telecom:email.use | |
Definition | Identifies the purpose for the contact point. |
Short | home | work | temp | old | mobile - purpose of this contact point |
Comments | Applications can assume that a contact is current unless it explicitly says that it is temporary or old. |
Control | 0..0 |
Binding | The codes SHALL be taken from ContactPointUse (required to http://hl7.org/fhir/ValueSet/contact-point-use|5.0.0 )Use of contact point. |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
112. Location.contact.telecom:email.rank | |
Definition | Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values. |
Short | Specify preferred order of use (1 = highest) |
Comments | Note that rank does not necessarily follow the order in which the contacts are represented in the instance. Ranks need not be unique. E.g. it's possible to have multiple contacts with rank=1. If the ranks have different systems or uses, this would be interpreted to mean "X is my most preferred phone number, Y is my most preferred email address" or "X is my preferred home email and Y is my preferred work email". If the system and use for equally-ranked contacts are the same, then the level of preference is equivalent for both repetitions. Ranks need not be sequential and not all repetitions must have a rank. For example, it's possible to have 4 contacts with ranks of 2, 5 and two with no rank specified. That would be interpreted to mean the first is preferred over the second and no preference stated for the remaining contacts. |
Control | 0..0 |
Type | positiveInt |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
114. Location.contact.telecom:email.period | |
Definition | Time period when the contact point was/is in use. |
Short | Time period when the contact point was/is in use |
Control | 0..0 |
Type | Period |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
116. Location.contact.address | |
Definition | Address for the contact. |
Short | Address for the contact |
Comments | More than 1 address would be for different purposes, and thus should be entered as a different entry,. |
Control | 0..1 |
Type | Address |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
118. Location.contact.organization | |
Definition | This contact detail is handled/monitored by a specific organization. If the name is provided in the contact, then it is referring to the named individual within this organization. |
Short | This contact detail is handled/monitored by a specific organization |
Control | 0..1 |
Type | Reference(Organization) |
Is Modifier | false |
Summary | true |
Requirements | Some specific types of contact information can be an handled by an organization (eg legal council is via a specific firm). |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
120. Location.contact.period | |
Definition | Period that this contact was valid for usage. |
Short | Period that this contact was valid for usage |
Comments | If the details have multiple periods, then enter in a new ExtendedContact with the new period. |
Control | 0..1 |
Type | Period |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
122. Location.address | |
Definition | Physical location. |
Short | Physical location |
Comments | Additional addresses should be recorded using another instance of the Location resource, or via the Organization. |
Control | 0..1 |
Type | Address |
Is Modifier | false |
Must Support | true |
Summary | false |
Requirements | If locations can be visited, we need to keep track of their address. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
124. Location.form | |
Definition | Physical form of the location, e.g. building, room, vehicle, road, virtual. |
Short | Physical form of the location |
Control | 0..0 |
Binding | For example codes, see LocationForm (example to http://hl7.org/fhir/ValueSet/location-form )Physical form of the location. |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | true |
Requirements | For purposes of showing relevant locations in queries, we need to categorize locations. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
126. Location.position | |
Definition | The absolute geographic location of the Location, expressed using the WGS84 datum (This is the same co-ordinate system used in KML). |
Short | The absolute geographic location |
Comments | To define a boundary shape for this location use the standard extension |
Control | 0..0 |
Type | BackboneElement |
Is Modifier | false |
Must Support | false |
Summary | false |
Requirements | For mobile applications and automated route-finding knowing the exact location of the Location is required. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
134. Location.managingOrganization | |
Definition | The organization responsible for the provisioning and upkeep of the location. |
Short | Organization responsible for provisioning and upkeep |
Comments | This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource. |
Control | 1..1 |
Type | Reference(Podmiot diagnostyczny (SSIDL)) |
Is Modifier | false |
Must Support | true |
Summary | true |
Requirements | Need to know who manages the location. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
136. Location.partOf | |
Definition | Another Location of which this Location is physically a part of. |
Short | Another Location this one is physically a part of |
Control | 0..0 |
Type | Reference(Location) |
Is Modifier | false |
Must Support | false |
Summary | false |
Requirements | For purposes of location, display and identification, knowing which locations are located within other locations is important. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
138. Location.characteristic | |
Definition | Collection of characteristics (attributes). |
Short | Collection of characteristics (attributes) |
Comments | These could be such things as is wheelchair accessible. |
Control | 0..0 |
Binding | For example codes, see LocationCharacteristic (example to http://hl7.org/fhir/ValueSet/location-characteristic )A custom attribute that could be provided at a service (e.g. Wheelchair accessibiliy). |
Type | CodeableConcept |
Is Modifier | false |
Must Support | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
140. Location.hoursOfOperation | |
Definition | What days/times during a week is this location usually open, and any exceptions where the location is not available. |
Short | What days/times during a week is this location usually open (including exceptions) |
Comments | This type of information is commonly found published in directories and on websites informing customers when the facility is available. Specific services within the location may have their own hours which could be shorter (or longer) than the locations hours. Systems may choose to render availability differently than it is exchanged on the interface. For example, rather than "Mon, Tue, Wed, Thur, Fri from 9am-12am; Mon, Tue, Wed, Thur, Fri from 1pm-5pm" as would be implied by two availableTime repetitions, an application could render this information as "Mon-Fri 9-12am and 1-5pm". The availableStartTime is the opening time, and the availableEndTime is the closing time. |
Control | 0..* |
Type | Availability |
Is Modifier | false |
Must Support | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
142. Location.virtualService | |
Definition | Connection details of a virtual service (e.g. shared conference call facility with dedicated number/details). |
Short | Connection details of a virtual service (e.g. conference call) |
Comments | There are two types of virtual meetings that often exist:
Implementers may consider using Appointment.virtualService for virtual meeting rooms that are generated on-demand. |
Control | 0..0 |
Type | VirtualServiceDetail |
Is Modifier | false |
Must Support | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
144. Location.endpoint | |
Definition | Technical endpoints providing access to services operated for the location. |
Short | Technical endpoints providing access to services operated for the location |
Control | 0..0 |
Type | Reference(Endpoint) |
Is Modifier | false |
Must Support | false |
Summary | false |
Requirements | Organizations may have different systems at different locations that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |