Specyfikacja interoperacyjności prototypu SSIDL
0.1.1 - ci-build

Specyfikacja interoperacyjności prototypu SSIDL, published by Uniwersytet Medyczny w Łodzi. This guide is not an authorized publication; it is the continuous build for version 0.1.1 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/SSIDL/ssidl-ig/ and changes regularly. See the Directory of published versions

Resource Profile: SsidlLocationIntakePoint - Detailed Descriptions

Draft as of 2025-08-28

Definitions for the ssidl-location-intakePoint resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Location
Definition

Details and position information for a place where services are provided and resources and participants may be stored, found, contained, or accommodated.

ShortDetails and position information for a place
Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Location.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Location.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

Control0..*
This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
TypeResource
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
6. Location.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Must Supportfalse
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Location.identifier
Definition

Unique code or number identifying the location to its users.

ShortUnique code or number identifying the location to its users
NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..1*
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Organization label locations in registries, need to keep track of those.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Location.identifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..01
BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|5.0.0
(required to http://hl7.org/fhir/ValueSet/identifier-use|5.0.0)

Identifies the purpose for this identifier, if known .

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Location.identifier.type
Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

ShortDescription of identifier
Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Control0..01
BindingUnless not suitable, these codes SHALL be taken from IdentifierTypeCodeshttp://hl7.org/fhir/ValueSet/identifier-type
(extensible to http://hl7.org/fhir/ValueSet/identifier-type)

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Location.identifier.system
Definition

Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control10..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

ExampleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Location.identifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control10..1
This element is affected by the following invariants: ident-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
ExampleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Location.identifier.period
Definition

Time period during which identifier is/was valid for use.

ShortTime period when id is/was valid for use
Control0..01
TypePeriod
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Location.identifier.assigner
Definition

Organization that issued/manages the identifier.

ShortOrganization that issued id (may be just text)
Comments

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Control0..01
TypeReference(Organization)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Location.status
Definition

The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location.

Shortactive | suspended | inactive
Control0..01
BindingThe codes SHALL be taken from LocationStatushttp://hl7.org/fhir/ValueSet/location-status|5.0.0
(required to http://hl7.org/fhir/ValueSet/location-status|5.0.0)

Indicates whether the location is still in use.

Typecode
Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Location.operationalStatus
Definition

The operational status covers operation values most relevant to beds (but can also apply to rooms/units/chairs/etc. such as an isolation unit/dialysis chair). This typically covers concepts such as contamination, housekeeping, and other activities like maintenance.

ShortThe operational status of the location (typically only for a bed/room)
Control0..01
BindingThe codes SHOULD be taken from hl7VS-bedStatushttp://terminology.hl7.org/ValueSet/v2-0116
(preferred to http://terminology.hl7.org/ValueSet/v2-0116)

The operational status if the location (where typically a bed/room).

TypeCoding
Is Modifierfalse
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Location.name
Definition

Name of the location as used by humans. Does not need to be unique.

ShortName of the location as used by humans
Comments

If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Location.description
Definition

Description of the Location, which helps in finding or referencing the place.

ShortAdditional details about the location that could be displayed as further information to identify the location beyond its name
Control0..01
Typemarkdown
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Requirements

Humans need additional information to verify a correct location has been identified.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Location.mode
Definition

Indicates whether a resource instance represents a specific location or a class of locations.

Shortinstance | kind
Comments

This is labeled as a modifier because whether or not the location is a class of locations changes how it can be used and understood.

Control10..1
BindingThe codes SHALL be taken from LocationModehttp://hl7.org/fhir/ValueSet/location-mode|5.0.0
(required to http://hl7.org/fhir/ValueSet/location-mode|5.0.0)

Indicates whether a resource instance represents a specific location or a class of locations.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

When using a Location resource for scheduling or orders, we need to be able to refer to a class of Locations instead of a specific Location.

Pattern Valueinstance
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Location.type
Definition

Indicates the type of function performed at the location.

ShortType of function performed
Control10..1*
BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from Kod rodzaju punktu pobrańhttp://terminology.hl7.org/ValueSet/v3-ServiceDeliveryLocationRoleType
(required to http://loinc-ssidl.umed.pl/fhir/ig/ssidl/ValueSet/pl-lab-intakePointType-VS)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Location.type.coding
Definition

A reference to a code defined by a terminology system.

ShortCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control10..1*
TypeCoding
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Location.type.coding.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

ShortIdentity of the terminology system
Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.

Control10..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Location.type.coding.version
Definition

The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

ShortVersion of the system - if relevant
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

NoteThis is a business version Id, not a resource version Id (see discussion)
Control0..01
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Location.type.coding.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

ShortSymbol in syntax defined by the system
Control10..1
This element is affected by the following invariants: cod-1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to refer to a particular code in the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Location.type.coding.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

ShortRepresentation defined by the system
Control10..1
This element is affected by the following invariants: cod-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Location.type.coding.userSelected
Definition

Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

ShortIf this coding was chosen directly by the user
Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

Control0..01
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Location.type.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

ShortPlain text representation of the concept
Comments

Very often the text is the same as a displayName of one of the codings.

Control0..01
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Location.contact
Definition

The contact details of communication devices available at the location. This can include addresses, phone numbers, fax numbers, mobile numbers, email addresses and web sites.

ShortOfficial contact details for the location
Comments

The address/telecom use code 'home' are not to be used. Note that these contacts are not the contact details of people who provide the service (that would be through PractitionerRole), these are official contacts for the Healthcare itself for specific purposes. E.g. Mailing Addresses, Billing Addresses, Contact numbers for Booking or Billing Enquiries, general web address, web address for online bookings etc.

If this is empty (or the type of interest is empty), refer to the organization's contacts.

Control0..1*
TypeExtendedContactDetail
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Need to keep track of both simple contact details and also assigned contacts within larger organizations.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Location.contact.telecom
Definition

The contact details application for the purpose defined.

ShortContact details (e.g.phone/fax/url)
Control0..*
TypeContactPoint
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Location.contact.telecom. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
  • value @ system
  • 52. Location.contact.telecom:phone
    Slice Namephone
    Definition

    The contact details application for the purpose defined.

    ShortContact details (e.g.phone/fax/url)
    Control0..*
    TypeContactPoint
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    54. Location.contact.telecom:phone.system
    Definition

    Telecommunications form for contact point - what communications system is required to make use of the contact.

    Shortphone | fax | email | pager | url | sms | other
    Control10..1
    This element is affected by the following invariants: cpt-2
    BindingThe codes SHALL be taken from ContactPointSystemhttp://hl7.org/fhir/ValueSet/contact-point-system|5.0.0
    (required to http://hl7.org/fhir/ValueSet/contact-point-system|5.0.0)

    Telecommunications form for contact point.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Pattern Valuephone
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    56. Location.contact.telecom:phone.value
    Definition

    The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

    ShortThe actual contact point details
    Comments

    Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

    Control10..1
    This element is affected by the following invariants: cpt-2
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Need to support legacy numbers that are not in a tightly controlled format.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    58. Location.contact.telecom:phone.use
    Definition

    Identifies the purpose for the contact point.

    Shorthome | work | temp | old | mobile - purpose of this contact point
    Comments

    Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

    Control0..01
    BindingThe codes SHALL be taken from ContactPointUsehttp://hl7.org/fhir/ValueSet/contact-point-use|5.0.0
    (required to http://hl7.org/fhir/ValueSet/contact-point-use|5.0.0)

    Use of contact point.

    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    60. Location.contact.telecom:phone.rank
    Definition

    Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

    ShortSpecify preferred order of use (1 = highest)
    Comments

    Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

    Ranks need not be unique. E.g. it's possible to have multiple contacts with rank=1. If the ranks have different systems or uses, this would be interpreted to mean "X is my most preferred phone number, Y is my most preferred email address" or "X is my preferred home email and Y is my preferred work email". If the system and use for equally-ranked contacts are the same, then the level of preference is equivalent for both repetitions.

    Ranks need not be sequential and not all repetitions must have a rank. For example, it's possible to have 4 contacts with ranks of 2, 5 and two with no rank specified. That would be interpreted to mean the first is preferred over the second and no preference stated for the remaining contacts.

    Control0..01
    TypepositiveInt
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    62. Location.contact.telecom:phone.period
    Definition

    Time period when the contact point was/is in use.

    ShortTime period when the contact point was/is in use
    Control0..01
    TypePeriod
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    64. Location.contact.telecom:email
    Slice Nameemail
    Definition

    The contact details application for the purpose defined.

    ShortContact details (e.g.phone/fax/url)
    Control0..*
    TypeContactPoint
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    66. Location.contact.telecom:email.system
    Definition

    Telecommunications form for contact point - what communications system is required to make use of the contact.

    Shortphone | fax | email | pager | url | sms | other
    Control10..1
    This element is affected by the following invariants: cpt-2
    BindingThe codes SHALL be taken from ContactPointSystemhttp://hl7.org/fhir/ValueSet/contact-point-system|5.0.0
    (required to http://hl7.org/fhir/ValueSet/contact-point-system|5.0.0)

    Telecommunications form for contact point.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Pattern Valueemail
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    68. Location.contact.telecom:email.value
    Definition

    The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

    ShortThe actual contact point details
    Comments

    Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

    Control10..1
    This element is affected by the following invariants: cpt-2
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Need to support legacy numbers that are not in a tightly controlled format.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    70. Location.contact.telecom:email.use
    Definition

    Identifies the purpose for the contact point.

    Shorthome | work | temp | old | mobile - purpose of this contact point
    Comments

    Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

    Control0..01
    BindingThe codes SHALL be taken from ContactPointUsehttp://hl7.org/fhir/ValueSet/contact-point-use|5.0.0
    (required to http://hl7.org/fhir/ValueSet/contact-point-use|5.0.0)

    Use of contact point.

    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    72. Location.contact.telecom:email.rank
    Definition

    Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

    ShortSpecify preferred order of use (1 = highest)
    Comments

    Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

    Ranks need not be unique. E.g. it's possible to have multiple contacts with rank=1. If the ranks have different systems or uses, this would be interpreted to mean "X is my most preferred phone number, Y is my most preferred email address" or "X is my preferred home email and Y is my preferred work email". If the system and use for equally-ranked contacts are the same, then the level of preference is equivalent for both repetitions.

    Ranks need not be sequential and not all repetitions must have a rank. For example, it's possible to have 4 contacts with ranks of 2, 5 and two with no rank specified. That would be interpreted to mean the first is preferred over the second and no preference stated for the remaining contacts.

    Control0..01
    TypepositiveInt
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    74. Location.contact.telecom:email.period
    Definition

    Time period when the contact point was/is in use.

    ShortTime period when the contact point was/is in use
    Control0..01
    TypePeriod
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    76. Location.address
    Definition

    Physical location.

    ShortPhysical location
    Comments

    Additional addresses should be recorded using another instance of the Location resource, or via the Organization.

    Control0..1
    TypeAddress
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    If locations can be visited, we need to keep track of their address.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    78. Location.form
    Definition

    Physical form of the location, e.g. building, room, vehicle, road, virtual.

    ShortPhysical form of the location
    Control0..01
    BindingFor example codes, see LocationFormhttp://hl7.org/fhir/ValueSet/location-form
    (example to http://hl7.org/fhir/ValueSet/location-form)

    Physical form of the location.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summarytrue
    Requirements

    For purposes of showing relevant locations in queries, we need to categorize locations.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    80. Location.position
    Definition

    The absolute geographic location of the Location, expressed using the WGS84 datum (This is the same co-ordinate system used in KML).

    ShortThe absolute geographic location
    Comments

    To define a boundary shape for this location use the standard extension [http://hl7.org/fhir/StructureDefinition/location-boundary-geojson](http://hl7.org/fhir/extensions/StructureDefinition-location-boundary-geojson.html), and search using the contains special search parameter.

    Control0..01
    TypeBackboneElement
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Requirements

    For mobile applications and automated route-finding knowing the exact location of the Location is required.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    85. Location.managingOrganization
    Definition

    The organization responsible for the provisioning and upkeep of the location.

    ShortOrganization responsible for provisioning and upkeep
    Comments

    This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource.

    Control10..1
    TypeReference(Podmiot diagnostyczny (SSIDL), Organization)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Need to know who manages the location.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    87. Location.partOf
    Definition

    Another Location of which this Location is physically a part of.

    ShortAnother Location this one is physically a part of
    Control0..01
    TypeReference(Location)
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Requirements

    For purposes of location, display and identification, knowing which locations are located within other locations is important.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    89. Location.characteristic
    Definition

    Collection of characteristics (attributes).

    ShortCollection of characteristics (attributes)
    Comments

    These could be such things as is wheelchair accessible.

    Control0..0*
    BindingFor example codes, see LocationCharacteristichttp://hl7.org/fhir/ValueSet/location-characteristic
    (example to http://hl7.org/fhir/ValueSet/location-characteristic)

    A custom attribute that could be provided at a service (e.g. Wheelchair accessibiliy).

    TypeCodeableConcept
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    91. Location.virtualService
    Definition

    Connection details of a virtual service (e.g. shared conference call facility with dedicated number/details).

    ShortConnection details of a virtual service (e.g. conference call)
    Comments

    There are two types of virtual meetings that often exist:

    • a persistent, virtual meeting room that can only be used for a single purpose at a time,
    • and a dynamic virtual meeting room that is generated on demand for a specific purpose.

    Implementers may consider using Appointment.virtualService for virtual meeting rooms that are generated on-demand.

    Control0..0*
    TypeVirtualServiceDetail
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    93. Location.endpoint
    Definition

    Technical endpoints providing access to services operated for the location.

    ShortTechnical endpoints providing access to services operated for the location
    Control0..0*
    TypeReference(Endpoint)
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Requirements

    Organizations may have different systems at different locations that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be foundhere

    0. Location
    2. Location.identifier
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control1..1
    Must Supporttrue
    4. Location.identifier.use
    Control0..0
    6. Location.identifier.type
    Control0..0
    8. Location.identifier.system
    Control1..?
    Must Supporttrue
    10. Location.identifier.value
    Control1..?
    Must Supporttrue
    12. Location.identifier.period
    Control0..0
    14. Location.identifier.assigner
    Control0..0
    16. Location.status
    Control0..0
    18. Location.operationalStatus
    Control0..0
    20. Location.name
    Control1..?
    Must Supporttrue
    22. Location.description
    Control0..0
    24. Location.mode
    Control1..?
    Must Supporttrue
    Pattern Valueinstance
    26. Location.type
    Control1..1
    BindingThe codes SHALL be taken from Kod rodzaju punktu pobrań
    (required to http://loinc-ssidl.umed.pl/fhir/ig/ssidl/ValueSet/pl-lab-intakePointType-VS)
    Must Supporttrue
    28. Location.type.coding
    Control1..1
    Must Supporttrue
    30. Location.type.coding.system
    Control1..?
    Must Supporttrue
    32. Location.type.coding.version
    NoteThis is a business version Id, not a resource version Id (see discussion)
    Control0..0
    34. Location.type.coding.code
    Control1..?
    Must Supporttrue
    36. Location.type.coding.display
    Control1..?
    Must Supporttrue
    38. Location.type.coding.userSelected
    Control0..0
    40. Location.type.text
    Control0..0
    42. Location.contact
    Control0..1
    Must Supporttrue
    44. Location.contact.telecom
    Must Supporttrue
    SlicingThis element introduces a set of slices on Location.contact.telecom. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
    • value @ system
    • 46. Location.contact.telecom:phone
      Slice Namephone
      Control0..*
      Must Supporttrue
      48. Location.contact.telecom:phone.system
      Control1..?
      Must Supporttrue
      Pattern Valuephone
      50. Location.contact.telecom:phone.value
      Control1..?
      Must Supporttrue
      52. Location.contact.telecom:phone.use
      Control0..0
      54. Location.contact.telecom:phone.rank
      Control0..0
      56. Location.contact.telecom:phone.period
      Control0..0
      58. Location.contact.telecom:email
      Slice Nameemail
      Control0..*
      Must Supporttrue
      60. Location.contact.telecom:email.system
      Control1..?
      Must Supporttrue
      Pattern Valueemail
      62. Location.contact.telecom:email.value
      Control1..?
      Must Supporttrue
      64. Location.contact.telecom:email.use
      Control0..0
      66. Location.contact.telecom:email.rank
      Control0..0
      68. Location.contact.telecom:email.period
      Control0..0
      70. Location.address
      Must Supporttrue
      72. Location.form
      Control0..0
      74. Location.position
      Control0..0
      76. Location.managingOrganization
      Control1..?
      TypeReference(Podmiot diagnostyczny (SSIDL))
      Must Supporttrue
      78. Location.partOf
      Control0..0
      80. Location.characteristic
      Control0..0
      82. Location.virtualService
      Control0..0
      84. Location.endpoint
      Control0..0

      Guidance on how to interpret the contents of this table can be foundhere

      0. Location
      Definition

      Details and position information for a place where services are provided and resources and participants may be stored, found, contained, or accommodated.

      ShortDetails and position information for a place
      Control0..*
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().ofType(canonical) | %resource.descendants().ofType(uri) | %resource.descendants().ofType(url))) or descendants().where(reference = '#').exists() or descendants().where(ofType(canonical) = '#').exists() or descendants().where(ofType(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      2. Location.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case.

      Control0..1
      Typeid
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      4. Location.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. Location.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies its meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. Location.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHALL be taken from AllLanguages
      (required to http://hl7.org/fhir/ValueSet/all-languages|5.0.0)

      IETF language tag for a human language

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supportfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. Location.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      This element is affected by the following invariants: dom-6
      TypeNarrative
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. Location.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, nor can they have their own independent transaction scope. This is allowed to be a Parameters resource if and only if it is referenced by a resource that provides context/meaning.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.

      Control0..*
      This element is affected by the following invariants: dom-2, dom-4, dom-3, dom-5
      TypeResource
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. Location.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      16. Location.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Must Supportfalse
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      18. Location.identifier
      Definition

      Unique code or number identifying the location to its users.

      ShortUnique code or number identifying the location to its users
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control1..1
      TypeIdentifier
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Organization label locations in registries, need to keep track of those.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Location.identifier.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      This element is affected by the following invariants: ele-1
      Typeid
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      22. Location.identifier.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Location.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 24. Location.identifier.use
        Definition

        The purpose of this identifier.

        Shortusual | official | temp | secondary | old (If known)
        Comments

        Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

        Control0..0
        BindingThe codes SHALL be taken from IdentifierUse
        (required to http://hl7.org/fhir/ValueSet/identifier-use|5.0.0)

        Identifies the purpose for this identifier, if known .

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. Location.identifier.type
        Definition

        A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

        ShortDescription of identifier
        Comments

        This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

        Control0..0
        BindingUnless not suitable, these codes SHALL be taken from IdentifierTypeCodes
        (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

        A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Requirements

        Allows users to make use of identifiers when the identifier system is not known.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. Location.identifier.system
        Definition

        Establishes the namespace for the value - that is, an absolute URL that describes a set values that are unique.

        ShortThe namespace for the identifier value
        Comments

        Identifier.system is always case sensitive.

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

        ExampleGeneral: http://www.acme.com/identifiers/patient
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. Location.identifier.value
        Definition

        The portion of the identifier typically relevant to the user and which is unique within the context of the system.

        ShortThe value that is unique
        Comments

        If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the http://hl7.org/fhir/StructureDefinition/rendered-value). Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

        Control1..1
        This element is affected by the following invariants: ident-1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        ExampleGeneral: 123456
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        32. Location.identifier.period
        Definition

        Time period during which identifier is/was valid for use.

        ShortTime period when id is/was valid for use
        Control0..0
        TypePeriod
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        34. Location.identifier.assigner
        Definition

        Organization that issued/manages the identifier.

        ShortOrganization that issued id (may be just text)
        Comments

        The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

        Control0..0
        TypeReference(Organization)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        36. Location.status
        Definition

        The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location.

        Shortactive | suspended | inactive
        Control0..0
        BindingThe codes SHALL be taken from LocationStatus
        (required to http://hl7.org/fhir/ValueSet/location-status|5.0.0)

        Indicates whether the location is still in use.

        Typecode
        Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        38. Location.operationalStatus
        Definition

        The operational status covers operation values most relevant to beds (but can also apply to rooms/units/chairs/etc. such as an isolation unit/dialysis chair). This typically covers concepts such as contamination, housekeeping, and other activities like maintenance.

        ShortThe operational status of the location (typically only for a bed/room)
        Control0..0
        BindingThe codes SHOULD be taken from hl7VS-bedStatus
        (preferred to http://terminology.hl7.org/ValueSet/v2-0116)

        The operational status if the location (where typically a bed/room).

        TypeCoding
        Is Modifierfalse
        Must Supportfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. Location.name
        Definition

        Name of the location as used by humans. Does not need to be unique.

        ShortName of the location as used by humans
        Comments

        If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches.

        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. Location.alias
        Definition

        A list of alternate names that the location is known as, or was known as, in the past.

        ShortA list of alternate names that the location is known as, or was known as, in the past
        Comments

        There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the location.

        Control0..*
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summaryfalse
        Requirements

        Over time locations and organizations go through many changes and can be known by different names.

        For searching knowing previous names that the location was known by can be very useful.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        44. Location.description
        Definition

        Description of the Location, which helps in finding or referencing the place.

        ShortAdditional details about the location that could be displayed as further information to identify the location beyond its name
        Control0..0
        Typemarkdown
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supportfalse
        Summarytrue
        Requirements

        Humans need additional information to verify a correct location has been identified.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        46. Location.mode
        Definition

        Indicates whether a resource instance represents a specific location or a class of locations.

        Shortinstance | kind
        Comments

        This is labeled as a modifier because whether or not the location is a class of locations changes how it can be used and understood.

        Control1..1
        BindingThe codes SHALL be taken from LocationMode
        (required to http://hl7.org/fhir/ValueSet/location-mode|5.0.0)

        Indicates whether a resource instance represents a specific location or a class of locations.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        When using a Location resource for scheduling or orders, we need to be able to refer to a class of Locations instead of a specific Location.

        Pattern Valueinstance
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        48. Location.type
        Definition

        Indicates the type of function performed at the location.

        ShortType of function performed
        Control1..1
        BindingThe codes SHALL be taken from Kod rodzaju punktu pobrań
        (required to http://loinc-ssidl.umed.pl/fhir/ig/ssidl/ValueSet/pl-lab-intakePointType-VS)
        TypeCodeableConcept
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        50. Location.type.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        This element is affected by the following invariants: ele-1
        Typeid
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        52. Location.type.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Location.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 54. Location.type.coding
          Definition

          A reference to a code defined by a terminology system.

          ShortCode defined by a terminology system
          Comments

          Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

          Control1..1
          TypeCoding
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Allows for alternative encodings within a code system, and translations to other code systems.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          56. Location.type.coding.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          This element is affected by the following invariants: ele-1
          Typeid
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          58. Location.type.coding.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Location.type.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 60. Location.type.coding.system
            Definition

            The identification of the code system that defines the meaning of the symbol in the code.

            ShortIdentity of the terminology system
            Comments

            The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should be an absolute reference to some definition that establishes the system clearly and unambiguously.

            Control1..1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Requirements

            Need to be unambiguous about the source of the definition of the symbol.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            62. Location.type.coding.version
            Definition

            The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

            ShortVersion of the system - if relevant
            Comments

            Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

            NoteThis is a business version Id, not a resource version Id (see discussion)
            Control0..0
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            64. Location.type.coding.code
            Definition

            A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

            ShortSymbol in syntax defined by the system
            Control1..1
            This element is affected by the following invariants: cod-1
            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Requirements

            Need to refer to a particular code in the system.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            66. Location.type.coding.display
            Definition

            A representation of the meaning of the code in the system, following the rules of the system.

            ShortRepresentation defined by the system
            Control1..1
            This element is affected by the following invariants: cod-1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Requirements

            Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            68. Location.type.coding.userSelected
            Definition

            Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

            ShortIf this coding was chosen directly by the user
            Comments

            Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

            Control0..0
            Typeboolean
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            70. Location.type.text
            Definition

            A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

            ShortPlain text representation of the concept
            Comments

            Very often the text is the same as a displayName of one of the codings.

            Control0..0
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            72. Location.contact
            Definition

            The contact details of communication devices available at the location. This can include addresses, phone numbers, fax numbers, mobile numbers, email addresses and web sites.

            ShortOfficial contact details for the location
            Comments

            The address/telecom use code 'home' are not to be used. Note that these contacts are not the contact details of people who provide the service (that would be through PractitionerRole), these are official contacts for the Healthcare itself for specific purposes. E.g. Mailing Addresses, Billing Addresses, Contact numbers for Booking or Billing Enquiries, general web address, web address for online bookings etc.

            If this is empty (or the type of interest is empty), refer to the organization's contacts.

            Control0..1
            TypeExtendedContactDetail
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Requirements

            Need to keep track of both simple contact details and also assigned contacts within larger organizations.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            74. Location.contact.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            This element is affected by the following invariants: ele-1
            Typeid
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            76. Location.contact.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Location.contact.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 78. Location.contact.purpose
              Definition

              The purpose/type of contact.

              ShortThe type of contact
              Comments

              If no purpose is defined, then these contact details may be used for any purpose.

              Control0..1
              BindingThe codes SHOULD be taken from Contact entity type
              (preferred to http://terminology.hl7.org/ValueSet/contactentity-type)

              The purpose for which an extended contact detail should be used.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              80. Location.contact.name
              Definition

              The name of an individual to contact, some types of contact detail are usually blank.

              ShortName of an individual to contact
              Comments

              If there is no named individual, the telecom/address information is not generally monitored by a specific individual.

              Control0..*
              TypeHumanName
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              82. Location.contact.telecom
              Definition

              The contact details application for the purpose defined.

              ShortContact details (e.g.phone/fax/url)
              Control0..*
              TypeContactPoint
              Is Modifierfalse
              Must Supporttrue
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              SlicingThis element introduces a set of slices on Location.contact.telecom. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
              • value @ system
              • 84. Location.contact.telecom:phone
                Slice Namephone
                Definition

                The contact details application for the purpose defined.

                ShortContact details (e.g.phone/fax/url)
                Control0..*
                TypeContactPoint
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                86. Location.contact.telecom:phone.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                This element is affected by the following invariants: ele-1
                Typeid
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                88. Location.contact.telecom:phone.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Location.contact.telecom.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 90. Location.contact.telecom:phone.system
                  Definition

                  Telecommunications form for contact point - what communications system is required to make use of the contact.

                  Shortphone | fax | email | pager | url | sms | other
                  Control1..1
                  This element is affected by the following invariants: cpt-2
                  BindingThe codes SHALL be taken from ContactPointSystem
                  (required to http://hl7.org/fhir/ValueSet/contact-point-system|5.0.0)

                  Telecommunications form for contact point.

                  Typecode
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Pattern Valuephone
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  92. Location.contact.telecom:phone.value
                  Definition

                  The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

                  ShortThe actual contact point details
                  Comments

                  Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

                  Control1..1
                  This element is affected by the following invariants: cpt-2
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summarytrue
                  Requirements

                  Need to support legacy numbers that are not in a tightly controlled format.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  94. Location.contact.telecom:phone.use
                  Definition

                  Identifies the purpose for the contact point.

                  Shorthome | work | temp | old | mobile - purpose of this contact point
                  Comments

                  Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

                  Control0..0
                  BindingThe codes SHALL be taken from ContactPointUse
                  (required to http://hl7.org/fhir/ValueSet/contact-point-use|5.0.0)

                  Use of contact point.

                  Typecode
                  Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  96. Location.contact.telecom:phone.rank
                  Definition

                  Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

                  ShortSpecify preferred order of use (1 = highest)
                  Comments

                  Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

                  Ranks need not be unique. E.g. it's possible to have multiple contacts with rank=1. If the ranks have different systems or uses, this would be interpreted to mean "X is my most preferred phone number, Y is my most preferred email address" or "X is my preferred home email and Y is my preferred work email". If the system and use for equally-ranked contacts are the same, then the level of preference is equivalent for both repetitions.

                  Ranks need not be sequential and not all repetitions must have a rank. For example, it's possible to have 4 contacts with ranks of 2, 5 and two with no rank specified. That would be interpreted to mean the first is preferred over the second and no preference stated for the remaining contacts.

                  Control0..0
                  TypepositiveInt
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  98. Location.contact.telecom:phone.period
                  Definition

                  Time period when the contact point was/is in use.

                  ShortTime period when the contact point was/is in use
                  Control0..0
                  TypePeriod
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  100. Location.contact.telecom:email
                  Slice Nameemail
                  Definition

                  The contact details application for the purpose defined.

                  ShortContact details (e.g.phone/fax/url)
                  Control0..*
                  TypeContactPoint
                  Is Modifierfalse
                  Must Supporttrue
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  102. Location.contact.telecom:email.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  Typeid
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  104. Location.contact.telecom:email.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Location.contact.telecom.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 106. Location.contact.telecom:email.system
                    Definition

                    Telecommunications form for contact point - what communications system is required to make use of the contact.

                    Shortphone | fax | email | pager | url | sms | other
                    Control1..1
                    This element is affected by the following invariants: cpt-2
                    BindingThe codes SHALL be taken from ContactPointSystem
                    (required to http://hl7.org/fhir/ValueSet/contact-point-system|5.0.0)

                    Telecommunications form for contact point.

                    Typecode
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supporttrue
                    Summarytrue
                    Pattern Valueemail
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    108. Location.contact.telecom:email.value
                    Definition

                    The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

                    ShortThe actual contact point details
                    Comments

                    Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

                    Control1..1
                    This element is affected by the following invariants: cpt-2
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Need to support legacy numbers that are not in a tightly controlled format.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    110. Location.contact.telecom:email.use
                    Definition

                    Identifies the purpose for the contact point.

                    Shorthome | work | temp | old | mobile - purpose of this contact point
                    Comments

                    Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

                    Control0..0
                    BindingThe codes SHALL be taken from ContactPointUse
                    (required to http://hl7.org/fhir/ValueSet/contact-point-use|5.0.0)

                    Use of contact point.

                    Typecode
                    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    112. Location.contact.telecom:email.rank
                    Definition

                    Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

                    ShortSpecify preferred order of use (1 = highest)
                    Comments

                    Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

                    Ranks need not be unique. E.g. it's possible to have multiple contacts with rank=1. If the ranks have different systems or uses, this would be interpreted to mean "X is my most preferred phone number, Y is my most preferred email address" or "X is my preferred home email and Y is my preferred work email". If the system and use for equally-ranked contacts are the same, then the level of preference is equivalent for both repetitions.

                    Ranks need not be sequential and not all repetitions must have a rank. For example, it's possible to have 4 contacts with ranks of 2, 5 and two with no rank specified. That would be interpreted to mean the first is preferred over the second and no preference stated for the remaining contacts.

                    Control0..0
                    TypepositiveInt
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    114. Location.contact.telecom:email.period
                    Definition

                    Time period when the contact point was/is in use.

                    ShortTime period when the contact point was/is in use
                    Control0..0
                    TypePeriod
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    116. Location.contact.address
                    Definition

                    Address for the contact.

                    ShortAddress for the contact
                    Comments

                    More than 1 address would be for different purposes, and thus should be entered as a different entry,.

                    Control0..1
                    TypeAddress
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    118. Location.contact.organization
                    Definition

                    This contact detail is handled/monitored by a specific organization. If the name is provided in the contact, then it is referring to the named individual within this organization.

                    ShortThis contact detail is handled/monitored by a specific organization
                    Control0..1
                    TypeReference(Organization)
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    Some specific types of contact information can be an handled by an organization (eg legal council is via a specific firm).

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    120. Location.contact.period
                    Definition

                    Period that this contact was valid for usage.

                    ShortPeriod that this contact was valid for usage
                    Comments

                    If the details have multiple periods, then enter in a new ExtendedContact with the new period.

                    Control0..1
                    TypePeriod
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    122. Location.address
                    Definition

                    Physical location.

                    ShortPhysical location
                    Comments

                    Additional addresses should be recorded using another instance of the Location resource, or via the Organization.

                    Control0..1
                    TypeAddress
                    Is Modifierfalse
                    Must Supporttrue
                    Summaryfalse
                    Requirements

                    If locations can be visited, we need to keep track of their address.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    124. Location.form
                    Definition

                    Physical form of the location, e.g. building, room, vehicle, road, virtual.

                    ShortPhysical form of the location
                    Control0..0
                    BindingFor example codes, see LocationForm
                    (example to http://hl7.org/fhir/ValueSet/location-form)

                    Physical form of the location.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supportfalse
                    Summarytrue
                    Requirements

                    For purposes of showing relevant locations in queries, we need to categorize locations.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    126. Location.position
                    Definition

                    The absolute geographic location of the Location, expressed using the WGS84 datum (This is the same co-ordinate system used in KML).

                    ShortThe absolute geographic location
                    Comments

                    To define a boundary shape for this location use the standard extension [http://hl7.org/fhir/StructureDefinition/location-boundary-geojson](http://hl7.org/fhir/extensions/StructureDefinition-location-boundary-geojson.html), and search using the contains special search parameter.

                    Control0..0
                    TypeBackboneElement
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Requirements

                    For mobile applications and automated route-finding knowing the exact location of the Location is required.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    134. Location.managingOrganization
                    Definition

                    The organization responsible for the provisioning and upkeep of the location.

                    ShortOrganization responsible for provisioning and upkeep
                    Comments

                    This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource.

                    Control1..1
                    TypeReference(Podmiot diagnostyczny (SSIDL))
                    Is Modifierfalse
                    Must Supporttrue
                    Summarytrue
                    Requirements

                    Need to know who manages the location.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    136. Location.partOf
                    Definition

                    Another Location of which this Location is physically a part of.

                    ShortAnother Location this one is physically a part of
                    Control0..0
                    TypeReference(Location)
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Requirements

                    For purposes of location, display and identification, knowing which locations are located within other locations is important.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    138. Location.characteristic
                    Definition

                    Collection of characteristics (attributes).

                    ShortCollection of characteristics (attributes)
                    Comments

                    These could be such things as is wheelchair accessible.

                    Control0..0
                    BindingFor example codes, see LocationCharacteristic
                    (example to http://hl7.org/fhir/ValueSet/location-characteristic)

                    A custom attribute that could be provided at a service (e.g. Wheelchair accessibiliy).

                    TypeCodeableConcept
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    140. Location.hoursOfOperation
                    Definition

                    What days/times during a week is this location usually open, and any exceptions where the location is not available.

                    ShortWhat days/times during a week is this location usually open (including exceptions)
                    Comments

                    This type of information is commonly found published in directories and on websites informing customers when the facility is available.

                    Specific services within the location may have their own hours which could be shorter (or longer) than the locations hours.

                    Systems may choose to render availability differently than it is exchanged on the interface. For example, rather than "Mon, Tue, Wed, Thur, Fri from 9am-12am; Mon, Tue, Wed, Thur, Fri from 1pm-5pm" as would be implied by two availableTime repetitions, an application could render this information as "Mon-Fri 9-12am and 1-5pm".

                    The availableStartTime is the opening time, and the availableEndTime is the closing time.

                    Control0..*
                    TypeAvailability
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    142. Location.virtualService
                    Definition

                    Connection details of a virtual service (e.g. shared conference call facility with dedicated number/details).

                    ShortConnection details of a virtual service (e.g. conference call)
                    Comments

                    There are two types of virtual meetings that often exist:

                    • a persistent, virtual meeting room that can only be used for a single purpose at a time,
                    • and a dynamic virtual meeting room that is generated on demand for a specific purpose.

                    Implementers may consider using Appointment.virtualService for virtual meeting rooms that are generated on-demand.

                    Control0..0
                    TypeVirtualServiceDetail
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    144. Location.endpoint
                    Definition

                    Technical endpoints providing access to services operated for the location.

                    ShortTechnical endpoints providing access to services operated for the location
                    Control0..0
                    TypeReference(Endpoint)
                    Is Modifierfalse
                    Must Supportfalse
                    Summaryfalse
                    Requirements

                    Organizations may have different systems at different locations that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))