DHIN 2025Connectathon FHIR IG
0.1.0 - draft

DHIN 2025Connectathon FHIR IG, published by DHIN. This guide is not an authorized publication; it is the continuous build for version 0.1.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/Nigeria-FHIR-Community/2025Connectathon/ and changes regularly. See the Directory of published versions

Resource Profile: NgClaim - Detailed Descriptions

Draft as of 2025-10-02

Definitions for the ng-claim resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Claim
Definition

A provider issued list of professional services and products which have been provided, or are to be provided, to a patient which is sent to an insurer for reimbursement.

ShortClaim, Pre-determination or Pre-authorization
Comments

The Claim resource fulfills three information request requirements: Claim - a request for adjudication for reimbursement for products and/or services provided; Preauthorization - a request to authorize the future provision of products and/or services including an anticipated adjudication; and, Predetermination - a request for a non-bind adjudication of possible future products and/or services.

Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesAdjudication Request, Preauthorization Request, Predetermination Request
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Claim.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Claim.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Claim.status
Definition

The status of the resource instance.

Shortactive | cancelled | draft | entered-in-error
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Control1..1
BindingThe codes SHALL be taken from FinancialResourceStatusCodeshttp://hl7.org/fhir/ValueSet/fm-status|4.0.1
(required to http://hl7.org/fhir/ValueSet/fm-status|4.0.1)

A code specifying the state of the resource instance.

Typecode
Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Claim.type
Definition

The category of claim, e.g. oral, pharmacy, vision, institutional, professional.

ShortCategory or discipline
Comments

The majority of jurisdictions use: oral, pharmacy, vision, professional and institutional, or variants on those terms, as the general styles of claims. The valueset is extensible to accommodate other jurisdictional requirements.

Control1..1
BindingUnless not suitable, these codes SHALL be taken from ClaimTypeCodeshttp://hl7.org/fhir/ValueSet/claim-type|4.0.1
(extensible to http://hl7.org/fhir/ValueSet/claim-type|4.0.1)

The type or discipline-style of the claim.

TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Claim type determine the general sets of business rules applied for information requirements and adjudication.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Claim.use
Definition

A code to indicate whether the nature of the request is: to request adjudication of products and services previously rendered; or requesting authorization and adjudication for provision in the future; or requesting the non-binding adjudication of the listed products and services which could be provided in the future.

Shortwhat the claim is for (Required - claim | preauthorization | predetermination)claim | preauthorization | predetermination
Control1..1
BindingThe codes SHALL be taken from Usehttp://hl7.org/fhir/ValueSet/claim-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/claim-use|4.0.1)

The purpose of the Claim: predetermination, preauthorization, claim.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

This element is required to understand the nature of the request for adjudication.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Claim.patient
Definition

The party to whom the professional services and/or products have been supplied or are being considered and for whom actual or forecast reimbursement is sought.

ShortThe recipient of the products and services
Control1..1
TypeReference(NG Patient, Patient)
Is Modifierfalse
Summarytrue
Requirements

The patient must be supplied to the insurer so that confirmation of coverage and service history may be considered as part of the authorization and/or adjudiction.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Claim.created
Definition

The date this resource was created.

ShortResource creation date
Comments

This field is independent of the date of creation of the resource as it may reflect the creation date of a source document prior to digitization. Typically for claims all services must be completed as of this date.

Control1..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to record a timestamp for use by both the recipient and the issuer.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Claim.provider
Definition

The provider which is responsible for the claim, predetermination or preauthorization.

ShortThe party responsible for the claimParty responsible for the claim
Comments

Typically this field would be 1..1 where this party is responsible for the claim but not necessarily professionally responsible for the provision of the individual products and services listed below.

Control1..1
TypeReference(Practitioner, PractitionerRole, Organization)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Claim.priority
Definition

The provider-required urgency of processing the request. Typical values include: stat, routine deferred.

ShortDesired processing ugency
Comments

If a claim processor is unable to complete the processing as per the priority then they should generate and error and not process the request.

Control1..1
BindingFor example codes, see ProcessPriorityCodeshttp://hl7.org/fhir/ValueSet/process-priority|4.0.1
(example to http://hl7.org/fhir/ValueSet/process-priority|4.0.1)

The timeliness with which processing is required: stat, normal, deferred.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

The provider may need to indicate their processing requirements so that the processor can indicate if they are unable to comply.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Claim.diagnosis
Definition

Information about diagnoses relevant to the claim items.

ShortPertinent diagnosis information
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Required for the adjudication by provided context for the services and product listed.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Claim.diagnosis.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
24. Claim.diagnosis.sequence
Definition

A number to uniquely identify diagnosis entries.

ShortDiagnosis instance identifier
Comments

Diagnosis are presented in list order to their expected importance: primary, secondary, etc.

Control1..1
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Necessary to maintain the order of the diagnosis items and provide a mechanism to link to claim details.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Claim.diagnosis.diagnosis[x]
Definition

The nature of illness or problem in a coded form or as a reference to an external defined Condition.

ShortNature of illness or problem
Control1..1
BindingFor example codes, see ICD-10Codeshttp://hl7.org/fhir/ValueSet/icd-10|4.0.1
(example to http://hl7.org/fhir/ValueSet/icd-10|4.0.1)

Example ICD10 Diagnostic codes.

TypeChoice of: CodeableConcept, Reference(Condition)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Requirements

Provides health context for the evaluation of the products and/or services.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Claim.diagnosis.type
Definition

When the condition was observed or the relative ranking.

ShortTiming or nature of the diagnosis
Comments

For example: admitting, primary, secondary, discharge.

Control0..1*
BindingFor example codes, see ExampleDiagnosisTypeCodeshttp://hl7.org/fhir/ValueSet/ex-diagnosistype|4.0.1
(example to http://hl7.org/fhir/ValueSet/ex-diagnosistype|4.0.1)

The type of the diagnosis: admitting, principal, discharge.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Often required to capture a particular diagnosis, for example: primary or discharge.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Claim.insurance
Definition

Financial instruments for reimbursement for the health care products and services specified on the claim.

ShortPatient insurance information
Comments

All insurance coverages for the patient which may be applicable for reimbursement, of the products and services listed in the claim, are typically provided in the claim to allow insurers to confirm the ordering of the insurance coverages relative to local 'coordination of benefit' rules. One coverage (and only one) with 'focal=true' is to be used in the adjudication of this claim. Coverages appearing before the focal Coverage in the list, and where 'Coverage.subrogation=false', should provide a reference to the ClaimResponse containing the adjudication results of the prior claim.

Control1..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

At least one insurer is required for a claim to be a claim.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Claim.insurance.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
34. Claim.insurance.sequence
Definition

A number to uniquely identify insurance entries and provide a sequence of coverages to convey coordination of benefit order.

ShortInsurance instance identifier
Control1..1
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

To maintain order of the coverages.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Claim.insurance.focal
Definition

A flag to indicate that this Coverage is to be used for adjudication of this claim when set to true.

ShortCoverage to be used for adjudication
Comments

A patient may (will) have multiple insurance policies which provide reimbursement for healthcare services and products. For example a person may also be covered by their spouse's policy and both appear in the list (and may be from the same insurer). This flag will be set to true for only one of the listed policies and that policy will be used for adjudicating this claim. Other claims would be created to request adjudication against the other listed policies.

Control1..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

To identify which coverage in the list is being used to adjudicate this claim.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Claim.insurance.identifier
Definition

The business identifier to be used when the claim is sent for adjudication against this insurance policy.

ShortPre-assigned insurance numberPre-assigned Claim number
Comments

Only required in jurisdictions where insurers, rather than the provider, are required to send claims to insurers that appear after them in the list. This element is not required when 'subrogation=true'.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..1
TypeIdentifier
Is Modifierfalse
Summaryfalse
Requirements

This will be the claim number should it be necessary to create this claim in the future. This is provided so that payors may forward claims to other payors in the Coordination of Benefit for adjudication rather than the provider being required to initiate each adjudication.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Claim.insurance.coverage
Definition

Reference to the insurance card level information contained in the Coverage resource. The coverage issuing insurer will use these details to locate the patient's actual coverage within the insurer's information system.

ShortInsurance information
Control1..1
TypeReference(Coverage)
Is Modifierfalse
Summarytrue
Requirements

Required to allow the adjudicator to locate the correct policy and history within their information system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Claim.insurance.claimResponse
Definition

The result of the adjudication of the line items for the Coverage specified in this insurance.

ShortAdjudication results
Comments

Must not be specified when 'focal=true' for this insurance.

Control0..1
TypeReference(NG ClaimResponse, ClaimResponse)
Is Modifierfalse
Summaryfalse
Requirements

An insurer need the adjudication results from prior insurers to determine the outstanding balance remaining by item for the items in the curent claim.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Claim.item
Definition

A claim line. Either a simple product or service or a 'group' of details which can each be a simple items or groups of sub-details.

ShortProduct or service provided
Control10..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

The items to be processed for adjudication.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Claim.item.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
48. Claim.item.sequence
Definition

A number to uniquely identify item entries.

ShortItem instance identifier
Control1..1
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Necessary to provide a mechanism to link to items from within the claim and within the adjudication details of the ClaimResponse.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Claim.item.productOrService
Definition

When the value is a group code then this item collects a set of related claim details, otherwise this contains the product, service, drug or other billing code for the item.

ShortBilling, service, product, or drug code
Comments

If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

Control1..1
BindingFor example codes, see USCLSCodeshttp://hl7.org/fhir/ValueSet/service-uscls|4.0.1
(example to http://hl7.org/fhir/ValueSet/service-uscls|4.0.1)

Allowable service and product codes.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Necessary to state what was provided or done.

Alternate NamesDrug Code, Bill Code, Service Code
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be foundhere

0. Claim
2. Claim.status
Must Supporttrue
4. Claim.type
Must Supporttrue
6. Claim.use
Shortwhat the claim is for (Required - claim | preauthorization | predetermination)
Must Supporttrue
8. Claim.patient
TypeReference(NG Patient)
10. Claim.created
Must Supporttrue
12. Claim.provider
ShortThe party responsible for the claim
Must Supporttrue
14. Claim.payee
16. Claim.payee.party
TypeReference(NG Practitioner)
18. Claim.diagnosis
Must Supporttrue
20. Claim.diagnosis.type
Control0..1
22. Claim.procedure
24. Claim.procedure.procedure[x]
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
SlicingThis element introduces a set of slices on Claim.procedure.procedure[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
  • 26. Claim.procedure.procedure[x]:procedureReference
    Slice NameprocedureReference
    Control0..1
    TypeReference(NG Procedure)
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    28. Claim.insurance
    Must Supporttrue
    30. Claim.insurance.identifier
    ShortPre-assigned insurance number
    NoteThis is a business identifier, not a resource identifier (see discussion)
    32. Claim.insurance.claimResponse
    TypeReference(NG ClaimResponse)
    34. Claim.item
    Control1..?
    Must Supporttrue

    Guidance on how to interpret the contents of this table can be foundhere

    0. Claim
    Definition

    A provider issued list of professional services and products which have been provided, or are to be provided, to a patient which is sent to an insurer for reimbursement.

    ShortClaim, Pre-determination or Pre-authorization
    Comments

    The Claim resource fulfills three information request requirements: Claim - a request for adjudication for reimbursement for products and/or services provided; Preauthorization - a request to authorize the future provision of products and/or services including an anticipated adjudication; and, Predetermination - a request for a non-bind adjudication of possible future products and/or services.

    Control0..*
    Is Modifierfalse
    Summaryfalse
    Alternate NamesAdjudication Request, Preauthorization Request, Predetermination Request
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    2. Claim.id
    Definition

    The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

    ShortLogical id of this artifact
    Comments

    The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

    Control0..1
    Typeid
    Is Modifierfalse
    Summarytrue
    4. Claim.meta
    Definition

    The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

    ShortMetadata about the resource
    Control0..1
    TypeMeta
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    6. Claim.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. Claim.language
    Definition

    The base language in which the resource is written.

    ShortLanguage of the resource content
    Comments

    Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

    Control0..1
    BindingThe codes SHOULD be taken from CommonLanguages
    (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

    A human language.

    Additional BindingsPurpose
    AllLanguagesMax Binding
    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Claim.text
    Definition

    A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

    ShortText summary of the resource, for human interpretation
    Comments

    Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

    Control0..1
    TypeNarrative
    Is Modifierfalse
    Summaryfalse
    Alternate Namesnarrative, html, xhtml, display
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Claim.contained
    Definition

    These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

    ShortContained, inline Resources
    Comments

    This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

    Control0..*
    TypeResource
    Is Modifierfalse
    Summaryfalse
    Alternate Namesinline resources, anonymous resources, contained resources
    14. Claim.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. Claim.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    18. Claim.identifier
    Definition

    A unique identifier assigned to this claim.

    ShortBusiness Identifier for claim
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..*
    TypeIdentifier
    Is Modifierfalse
    Summaryfalse
    Requirements

    Allows claims to be distinguished and referenced.

    Alternate NamesClaim Number
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. Claim.status
    Definition

    The status of the resource instance.

    Shortactive | cancelled | draft | entered-in-error
    Comments

    This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from FinancialResourceStatusCodes
    (required to http://hl7.org/fhir/ValueSet/fm-status|4.0.1)

    A code specifying the state of the resource instance.

    Typecode
    Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. Claim.type
    Definition

    The category of claim, e.g. oral, pharmacy, vision, institutional, professional.

    ShortCategory or discipline
    Comments

    The majority of jurisdictions use: oral, pharmacy, vision, professional and institutional, or variants on those terms, as the general styles of claims. The valueset is extensible to accommodate other jurisdictional requirements.

    Control1..1
    BindingUnless not suitable, these codes SHALL be taken from ClaimTypeCodes
    (extensible to http://hl7.org/fhir/ValueSet/claim-type|4.0.1)

    The type or discipline-style of the claim.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Claim type determine the general sets of business rules applied for information requirements and adjudication.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. Claim.subType
    Definition

    A finer grained suite of claim type codes which may convey additional information such as Inpatient vs Outpatient and/or a specialty service.

    ShortMore granular claim type
    Comments

    This may contain the local bill type codes, for example the US UB-04 bill type code or the CMS bill type.

    Control0..1
    BindingFor example codes, see ExampleClaimSubTypeCodes
    (example to http://hl7.org/fhir/ValueSet/claim-subtype|4.0.1)

    A more granular claim typecode.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Some jurisdictions need a finer grained claim type for routing and adjudication.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. Claim.use
    Definition

    A code to indicate whether the nature of the request is: to request adjudication of products and services previously rendered; or requesting authorization and adjudication for provision in the future; or requesting the non-binding adjudication of the listed products and services which could be provided in the future.

    Shortwhat the claim is for (Required - claim | preauthorization | predetermination)
    Control1..1
    BindingThe codes SHALL be taken from Use
    (required to http://hl7.org/fhir/ValueSet/claim-use|4.0.1)

    The purpose of the Claim: predetermination, preauthorization, claim.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    This element is required to understand the nature of the request for adjudication.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. Claim.patient
    Definition

    The party to whom the professional services and/or products have been supplied or are being considered and for whom actual or forecast reimbursement is sought.

    ShortThe recipient of the products and services
    Control1..1
    TypeReference(NG Patient)
    Is Modifierfalse
    Summarytrue
    Requirements

    The patient must be supplied to the insurer so that confirmation of coverage and service history may be considered as part of the authorization and/or adjudiction.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    30. Claim.billablePeriod
    Definition

    The period for which charges are being submitted.

    ShortRelevant time frame for the claim
    Comments

    Typically this would be today or in the past for a claim, and today or in the future for preauthorizations and predeterminations. Typically line item dates of service should fall within the billing period if one is specified.

    Control0..1
    TypePeriod
    Is Modifierfalse
    Summarytrue
    Requirements

    A number jurisdictions required the submission of the billing period when submitting claims for example for hospital stays or long-term care.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    32. Claim.created
    Definition

    The date this resource was created.

    ShortResource creation date
    Comments

    This field is independent of the date of creation of the resource as it may reflect the creation date of a source document prior to digitization. Typically for claims all services must be completed as of this date.

    Control1..1
    TypedateTime
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Need to record a timestamp for use by both the recipient and the issuer.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    34. Claim.enterer
    Definition

    Individual who created the claim, predetermination or preauthorization.

    ShortAuthor of the claim
    Control0..1
    TypeReference(Practitioner, PractitionerRole)
    Is Modifierfalse
    Summaryfalse
    Requirements

    Some jurisdictions require the contact information for personnel completing claims.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    36. Claim.insurer
    Definition

    The Insurer who is target of the request.

    ShortTarget
    Control0..1
    TypeReference(Organization)
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    38. Claim.provider
    Definition

    The provider which is responsible for the claim, predetermination or preauthorization.

    ShortThe party responsible for the claim
    Comments

    Typically this field would be 1..1 where this party is responsible for the claim but not necessarily professionally responsible for the provision of the individual products and services listed below.

    Control1..1
    TypeReference(Practitioner, PractitionerRole, Organization)
    Is Modifierfalse
    Must Supporttrue
    Must Support TypesNo must-support rules about the choice of types/profiles
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    40. Claim.priority
    Definition

    The provider-required urgency of processing the request. Typical values include: stat, routine deferred.

    ShortDesired processing ugency
    Comments

    If a claim processor is unable to complete the processing as per the priority then they should generate and error and not process the request.

    Control1..1
    BindingFor example codes, see ProcessPriorityCodes
    (example to http://hl7.org/fhir/ValueSet/process-priority|4.0.1)

    The timeliness with which processing is required: stat, normal, deferred.

    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Requirements

    The provider may need to indicate their processing requirements so that the processor can indicate if they are unable to comply.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    42. Claim.fundsReserve
    Definition

    A code to indicate whether and for whom funds are to be reserved for future claims.

    ShortFor whom to reserve funds
    Comments

    This field is only used for preauthorizations.

    Control0..1
    BindingFor example codes, see Funds Reservation Codes
    (example to http://hl7.org/fhir/ValueSet/fundsreserve|4.0.1)

    For whom funds are to be reserved: (Patient, Provider, None).

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    In the case of a Pre-Determination/Pre-Authorization the provider may request that funds in the amount of the expected Benefit be reserved ('Patient' or 'Provider') to pay for the Benefits determined on the subsequent claim(s). 'None' explicitly indicates no funds reserving is requested.

    Alternate NamesFund pre-allocation
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    44. Claim.related
    Definition

    Other claims which are related to this claim such as prior submissions or claims for related services or for the same event.

    ShortPrior or corollary claims
    Comments

    For example, for the original treatment and follow-up exams.

    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Requirements

    For workplace or other accidents it is common to relate separate claims arising from the same event.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    46. Claim.related.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    48. Claim.related.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    50. Claim.related.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    52. Claim.related.claim
    Definition

    Reference to a related claim.

    ShortReference to the related claim
    Control0..1
    TypeReference(Claim)
    Is Modifierfalse
    Summaryfalse
    Requirements

    For workplace or other accidents it is common to relate separate claims arising from the same event.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    54. Claim.related.relationship
    Definition

    A code to convey how the claims are related.

    ShortHow the reference claim is related
    Comments

    For example, prior claim or umbrella.

    Control0..1
    BindingFor example codes, see ExampleRelatedClaimRelationshipCodes
    (example to http://hl7.org/fhir/ValueSet/related-claim-relationship|4.0.1)

    Relationship of this claim to a related Claim.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Some insurers need a declaration of the type of relationship.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    56. Claim.related.reference
    Definition

    An alternate organizational reference to the case or file to which this particular claim pertains.

    ShortFile or case reference
    Comments

    For example, Property/Casualty insurer claim # or Workers Compensation case # .

    Control0..1
    TypeIdentifier
    Is Modifierfalse
    Summaryfalse
    Requirements

    In cases where an event-triggered claim is being submitted to an insurer which requires a reference number to be specified on all exchanges.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    58. Claim.prescription
    Definition

    Prescription to support the dispensing of pharmacy, device or vision products.

    ShortPrescription authorizing services and products
    Control0..1
    TypeReference(DeviceRequest, MedicationRequest, VisionPrescription)
    Is Modifierfalse
    Summaryfalse
    Requirements

    Required to authorize the dispensing of controlled substances and devices.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    60. Claim.originalPrescription
    Definition

    Original prescription which has been superseded by this prescription to support the dispensing of pharmacy services, medications or products.

    ShortOriginal prescription if superseded by fulfiller
    Comments

    For example, a physician may prescribe a medication which the pharmacy determines is contraindicated, or for which the patient has an intolerance, and therefore issues a new prescription for an alternate medication which has the same therapeutic intent. The prescription from the pharmacy becomes the 'prescription' and that from the physician becomes the 'original prescription'.

    Control0..1
    TypeReference(DeviceRequest, MedicationRequest, VisionPrescription)
    Is Modifierfalse
    Summaryfalse
    Requirements

    Often required when a fulfiller varies what is fulfilled from that authorized on the original prescription.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    62. Claim.payee
    Definition

    The party to be reimbursed for cost of the products and services according to the terms of the policy.

    ShortRecipient of benefits payable
    Comments

    Often providers agree to receive the benefits payable to reduce the near-term costs to the patient. The insurer may decline to pay the provider and choose to pay the subscriber instead.

    Control0..1
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Requirements

    The provider needs to specify who they wish to be reimbursed and the claims processor needs express who they will reimburse.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    64. Claim.payee.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    66. Claim.payee.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    68. Claim.payee.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    70. Claim.payee.type
    Definition

    Type of Party to be reimbursed: subscriber, provider, other.

    ShortCategory of recipient
    Control1..1
    BindingFor example codes, see Claim Payee Type Codes
    (example to http://hl7.org/fhir/ValueSet/payeetype|4.0.1)

    A code for the party to be reimbursed.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Need to know who should receive payment with the most common situations being the Provider (assignment of benefits) or the Subscriber.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    72. Claim.payee.party
    Definition

    Reference to the individual or organization to whom any payment will be made.

    ShortRecipient reference
    Comments

    Not required if the payee is 'subscriber' or 'provider'.

    Control0..1
    TypeReference(NG Practitioner)
    Is Modifierfalse
    Summaryfalse
    Requirements

    Need to provide demographics if the payee is not 'subscriber' nor 'provider'.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    74. Claim.referral
    Definition

    A reference to a referral resource.

    ShortTreatment referral
    Comments

    The referral resource which lists the date, practitioner, reason and other supporting information.

    Control0..1
    TypeReference(ServiceRequest)
    Is Modifierfalse
    Summaryfalse
    Requirements

    Some insurers require proof of referral to pay for services or to pay specialist rates for services.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    76. Claim.facility
    Definition

    Facility where the services were provided.

    ShortServicing facility
    Control0..1
    TypeReference(Location)
    Is Modifierfalse
    Summaryfalse
    Requirements

    Insurance adjudication can be dependant on where services were delivered.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    78. Claim.careTeam
    Definition

    The members of the team who provided the products and services.

    ShortMembers of the care team
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Requirements

    Common to identify the responsible and supporting practitioners.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    80. Claim.careTeam.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    82. Claim.careTeam.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    84. Claim.careTeam.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    86. Claim.careTeam.sequence
    Definition

    A number to uniquely identify care team entries.

    ShortOrder of care team
    Control1..1
    TypepositiveInt
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Requirements

    Necessary to maintain the order of the care team and provide a mechanism to link individuals to claim details.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    88. Claim.careTeam.provider
    Definition

    Member of the team who provided the product or service.

    ShortPractitioner or organization
    Control1..1
    TypeReference(Practitioner, PractitionerRole, Organization)
    Is Modifierfalse
    Summaryfalse
    Requirements

    Often a regulatory requirement to specify the responsible provider.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    90. Claim.careTeam.responsible
    Definition

    The party who is billing and/or responsible for the claimed products or services.

    ShortIndicator of the lead practitioner
    Comments

    Responsible might not be required when there is only a single provider listed.

    Control0..1
    Typeboolean
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Requirements

    When multiple parties are present it is required to distinguish the lead or responsible individual.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    92. Claim.careTeam.role
    Definition

    The lead, assisting or supervising practitioner and their discipline if a multidisciplinary team.

    ShortFunction within the team
    Comments

    Role might not be required when there is only a single provider listed.

    Control0..1
    BindingFor example codes, see ClaimCareTeamRoleCodes
    (example to http://hl7.org/fhir/ValueSet/claim-careteamrole|4.0.1)

    The role codes for the care team members.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    When multiple parties are present it is required to distinguish the roles performed by each member.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    94. Claim.careTeam.qualification
    Definition

    The qualification of the practitioner which is applicable for this service.

    ShortPractitioner credential or specialization
    Control0..1
    BindingFor example codes, see ExampleProviderQualificationCodes
    (example to http://hl7.org/fhir/ValueSet/provider-qualification|4.0.1)

    Provider professional qualifications.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Need to specify which qualification a provider is delivering the product or service under.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    96. Claim.supportingInfo
    Definition

    Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues.

    ShortSupporting information
    Comments

    Often there are multiple jurisdiction specific valuesets which are required.

    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Requirements

    Typically these information codes are required to support the services rendered or the adjudication of the services rendered.

    Alternate NamesAttachments Exception Codes Occurrence Codes Value codes
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    98. Claim.supportingInfo.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    100. Claim.supportingInfo.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    102. Claim.supportingInfo.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    104. Claim.supportingInfo.sequence
    Definition

    A number to uniquely identify supporting information entries.

    ShortInformation instance identifier
    Control1..1
    TypepositiveInt
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Requirements

    Necessary to maintain the order of the supporting information items and provide a mechanism to link to claim details.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    106. Claim.supportingInfo.category
    Definition

    The general class of the information supplied: information; exception; accident, employment; onset, etc.

    ShortClassification of the supplied information
    Comments

    This may contain a category for the local bill type codes.

    Control1..1
    BindingFor example codes, see ClaimInformationCategoryCodes
    (example to http://hl7.org/fhir/ValueSet/claim-informationcategory|4.0.1)

    The valuset used for additional information category codes.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Required to group or associate information items with common characteristics. For example: admission information or prior treatments.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    108. Claim.supportingInfo.code
    Definition

    System and code pertaining to the specific information regarding special conditions relating to the setting, treatment or patient for which care is sought.

    ShortType of information
    Control0..1
    BindingFor example codes, see ExceptionCodes
    (example to http://hl7.org/fhir/ValueSet/claim-exception|4.0.1)

    The valuset used for additional information codes.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Required to identify the kind of additional information.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    110. Claim.supportingInfo.timing[x]
    Definition

    The date when or period to which this information refers.

    ShortWhen it occurred
    Control0..1
    TypeChoice of: date, Period
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    112. Claim.supportingInfo.value[x]
    Definition

    Additional data or information such as resources, documents, images etc. including references to the data or the actual inclusion of the data.

    ShortData to be provided
    Comments

    Could be used to provide references to other resources, document. For example could contain a PDF in an Attachment of the Police Report for an Accident.

    Control0..1
    TypeChoice of: boolean, string, Quantity, Attachment, Reference(Resource)
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Requirements

    To convey the data content to be provided when the information is more than a simple code or period.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    114. Claim.supportingInfo.reason
    Definition

    Provides the reason in the situation where a reason code is required in addition to the content.

    ShortExplanation for the information
    Comments

    For example: the reason for the additional stay, or why a tooth is missing.

    Control0..1
    BindingFor example codes, see MissingToothReasonCodes
    (example to http://hl7.org/fhir/ValueSet/missing-tooth-reason|4.0.1)

    Reason codes for the missing teeth.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Needed when the supporting information has both a date and amount/value and requires explanation.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    116. Claim.diagnosis
    Definition

    Information about diagnoses relevant to the claim items.

    ShortPertinent diagnosis information
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Required for the adjudication by provided context for the services and product listed.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    118. Claim.diagnosis.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    120. Claim.diagnosis.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    122. Claim.diagnosis.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    124. Claim.diagnosis.sequence
    Definition

    A number to uniquely identify diagnosis entries.

    ShortDiagnosis instance identifier
    Comments

    Diagnosis are presented in list order to their expected importance: primary, secondary, etc.

    Control1..1
    TypepositiveInt
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Requirements

    Necessary to maintain the order of the diagnosis items and provide a mechanism to link to claim details.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    126. Claim.diagnosis.diagnosis[x]
    Definition

    The nature of illness or problem in a coded form or as a reference to an external defined Condition.

    ShortNature of illness or problem
    Control1..1
    BindingFor example codes, see ICD-10Codes
    (example to http://hl7.org/fhir/ValueSet/icd-10|4.0.1)

    Example ICD10 Diagnostic codes.

    TypeChoice of: CodeableConcept, Reference(Condition)
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Summaryfalse
    Requirements

    Provides health context for the evaluation of the products and/or services.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    128. Claim.diagnosis.type
    Definition

    When the condition was observed or the relative ranking.

    ShortTiming or nature of the diagnosis
    Comments

    For example: admitting, primary, secondary, discharge.

    Control0..1
    BindingFor example codes, see ExampleDiagnosisTypeCodes
    (example to http://hl7.org/fhir/ValueSet/ex-diagnosistype|4.0.1)

    The type of the diagnosis: admitting, principal, discharge.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Often required to capture a particular diagnosis, for example: primary or discharge.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    130. Claim.diagnosis.onAdmission
    Definition

    Indication of whether the diagnosis was present on admission to a facility.

    ShortPresent on admission
    Control0..1
    BindingFor example codes, see ExampleDiagnosisOnAdmissionCodes
    (example to http://hl7.org/fhir/ValueSet/ex-diagnosis-on-admission|4.0.1)

    Present on admission.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Many systems need to understand for adjudication if the diagnosis was present a time of admission.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    132. Claim.diagnosis.packageCode
    Definition

    A package billing code or bundle code used to group products and services to a particular health condition (such as heart attack) which is based on a predetermined grouping code system.

    ShortPackage billing code
    Comments

    For example DRG (Diagnosis Related Group) or a bundled billing code. A patient may have a diagnosis of a Myocardial Infarction and a DRG for HeartAttack would be assigned. The Claim item (and possible subsequent claims) would refer to the DRG for those line items that were for services related to the heart attack event.

    Control0..1
    BindingFor example codes, see ExampleDiagnosisRelatedGroupCodes
    (example to http://hl7.org/fhir/ValueSet/ex-diagnosisrelatedgroup|4.0.1)

    The DRG codes associated with the diagnosis.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Required to relate the current diagnosis to a package billing code that is then referenced on the individual claim items which are specific to the health condition covered by the package code.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    134. Claim.procedure
    Definition

    Procedures performed on the patient relevant to the billing items with the claim.

    ShortClinical procedures performed
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Requirements

    The specific clinical invention are sometimes required to be provided to justify billing a greater than customary amount for a service.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    136. Claim.procedure.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    138. Claim.procedure.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    140. Claim.procedure.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    142. Claim.procedure.sequence
    Definition

    A number to uniquely identify procedure entries.

    ShortProcedure instance identifier
    Control1..1
    TypepositiveInt
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Requirements

    Necessary to provide a mechanism to link to claim details.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    144. Claim.procedure.type
    Definition

    When the condition was observed or the relative ranking.

    ShortCategory of Procedure
    Comments

    For example: primary, secondary.

    Control0..*
    BindingFor example codes, see ExampleProcedureTypeCodes
    (example to http://hl7.org/fhir/ValueSet/ex-procedure-type|4.0.1)

    Example procedure type codes.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Often required to capture a particular diagnosis, for example: primary or discharge.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    146. Claim.procedure.date
    Definition

    Date and optionally time the procedure was performed.

    ShortWhen the procedure was performed
    Control0..1
    TypedateTime
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Requirements

    Required for auditing purposes.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    148. Claim.procedure.procedure[x]
    Definition

    The code or reference to a Procedure resource which identifies the clinical intervention performed.

    ShortSpecific clinical procedure
    Control1..1
    BindingFor example codes, see ICD-10ProcedureCodes
    (example to http://hl7.org/fhir/ValueSet/icd-10-procedures|4.0.1)

    Example ICD10 Procedure codes.

    TypeChoice of: CodeableConcept, Reference(Procedure)
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Summaryfalse
    Requirements

    This identifies the actual clinical procedure.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Claim.procedure.procedure[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • type @ $this
    • 150. Claim.procedure.procedure[x]:procedureReference
      Slice NameprocedureReference
      Definition

      The code or reference to a Procedure resource which identifies the clinical intervention performed.

      ShortSpecific clinical procedure
      Control0..1
      TypeReference(NG Procedure)
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Summaryfalse
      Requirements

      This identifies the actual clinical procedure.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      152. Claim.procedure.udi
      Definition

      Unique Device Identifiers associated with this line item.

      ShortUnique device identifier
      Control0..*
      TypeReference(Device)
      Is Modifierfalse
      Summaryfalse
      Requirements

      The UDI code allows the insurer to obtain device level information on the product supplied.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      154. Claim.insurance
      Definition

      Financial instruments for reimbursement for the health care products and services specified on the claim.

      ShortPatient insurance information
      Comments

      All insurance coverages for the patient which may be applicable for reimbursement, of the products and services listed in the claim, are typically provided in the claim to allow insurers to confirm the ordering of the insurance coverages relative to local 'coordination of benefit' rules. One coverage (and only one) with 'focal=true' is to be used in the adjudication of this claim. Coverages appearing before the focal Coverage in the list, and where 'Coverage.subrogation=false', should provide a reference to the ClaimResponse containing the adjudication results of the prior claim.

      Control1..*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      At least one insurer is required for a claim to be a claim.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      156. Claim.insurance.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      158. Claim.insurance.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      160. Claim.insurance.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      162. Claim.insurance.sequence
      Definition

      A number to uniquely identify insurance entries and provide a sequence of coverages to convey coordination of benefit order.

      ShortInsurance instance identifier
      Control1..1
      TypepositiveInt
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      To maintain order of the coverages.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      164. Claim.insurance.focal
      Definition

      A flag to indicate that this Coverage is to be used for adjudication of this claim when set to true.

      ShortCoverage to be used for adjudication
      Comments

      A patient may (will) have multiple insurance policies which provide reimbursement for healthcare services and products. For example a person may also be covered by their spouse's policy and both appear in the list (and may be from the same insurer). This flag will be set to true for only one of the listed policies and that policy will be used for adjudicating this claim. Other claims would be created to request adjudication against the other listed policies.

      Control1..1
      Typeboolean
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      To identify which coverage in the list is being used to adjudicate this claim.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      166. Claim.insurance.identifier
      Definition

      The business identifier to be used when the claim is sent for adjudication against this insurance policy.

      ShortPre-assigned insurance number
      Comments

      Only required in jurisdictions where insurers, rather than the provider, are required to send claims to insurers that appear after them in the list. This element is not required when 'subrogation=true'.

      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..1
      TypeIdentifier
      Is Modifierfalse
      Summaryfalse
      Requirements

      This will be the claim number should it be necessary to create this claim in the future. This is provided so that payors may forward claims to other payors in the Coordination of Benefit for adjudication rather than the provider being required to initiate each adjudication.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      168. Claim.insurance.coverage
      Definition

      Reference to the insurance card level information contained in the Coverage resource. The coverage issuing insurer will use these details to locate the patient's actual coverage within the insurer's information system.

      ShortInsurance information
      Control1..1
      TypeReference(Coverage)
      Is Modifierfalse
      Summarytrue
      Requirements

      Required to allow the adjudicator to locate the correct policy and history within their information system.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      170. Claim.insurance.businessArrangement
      Definition

      A business agreement number established between the provider and the insurer for special business processing purposes.

      ShortAdditional provider contract number
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      Providers may have multiple business arrangements with a given insurer and must supply the specific contract number for adjudication.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      172. Claim.insurance.preAuthRef
      Definition

      Reference numbers previously provided by the insurer to the provider to be quoted on subsequent claims containing services or products related to the prior authorization.

      ShortPrior authorization reference number
      Comments

      This value is an alphanumeric string that may be provided over the phone, via text, via paper, or within a ClaimResponse resource and is not a FHIR Identifier.

      Control0..*
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      Providers must quote previously issued authorization reference numbers in order to obtain adjudication as previously advised on the Preauthorization.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      174. Claim.insurance.claimResponse
      Definition

      The result of the adjudication of the line items for the Coverage specified in this insurance.

      ShortAdjudication results
      Comments

      Must not be specified when 'focal=true' for this insurance.

      Control0..1
      TypeReference(NG ClaimResponse)
      Is Modifierfalse
      Summaryfalse
      Requirements

      An insurer need the adjudication results from prior insurers to determine the outstanding balance remaining by item for the items in the curent claim.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      176. Claim.accident
      Definition

      Details of an accident which resulted in injuries which required the products and services listed in the claim.

      ShortDetails of the event
      Control0..1
      TypeBackboneElement
      Is Modifierfalse
      Summaryfalse
      Requirements

      When healthcare products and services are accident related, benefits may be payable under accident provisions of policies, such as automotive, etc before they are payable under normal health insurance.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      178. Claim.accident.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      180. Claim.accident.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      182. Claim.accident.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      184. Claim.accident.date
      Definition

      Date of an accident event related to the products and services contained in the claim.

      ShortWhen the incident occurred
      Comments

      The date of the accident has to precede the dates of the products and services but within a reasonable timeframe.

      Control1..1
      Typedate
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      Required for audit purposes and adjudication.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      186. Claim.accident.type
      Definition

      The type or context of the accident event for the purposes of selection of potential insurance coverages and determination of coordination between insurers.

      ShortThe nature of the accident
      Control0..1
      BindingUnless not suitable, these codes SHALL be taken from ActIncidentCode
      (extensible to http://terminology.hl7.org/ValueSet/v3-ActIncidentCode)

      Type of accident: work place, auto, etc.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Coverage may be dependant on the type of accident.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      188. Claim.accident.location[x]
      Definition

      The physical location of the accident event.

      ShortWhere the event occurred
      Control0..1
      TypeChoice of: Address, Reference(Location)
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Summaryfalse
      Requirements

      Required for audit purposes and determination of applicable insurance liability.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      190. Claim.item
      Definition

      A claim line. Either a simple product or service or a 'group' of details which can each be a simple items or groups of sub-details.

      ShortProduct or service provided
      Control1..*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      The items to be processed for adjudication.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      192. Claim.item.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      194. Claim.item.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      196. Claim.item.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      198. Claim.item.sequence
      Definition

      A number to uniquely identify item entries.

      ShortItem instance identifier
      Control1..1
      TypepositiveInt
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      Necessary to provide a mechanism to link to items from within the claim and within the adjudication details of the ClaimResponse.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      200. Claim.item.careTeamSequence
      Definition

      CareTeam members related to this service or product.

      ShortApplicable careTeam members
      Control0..*
      TypepositiveInt
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      Need to identify the individuals and their roles in the provision of the product or service.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      202. Claim.item.diagnosisSequence
      Definition

      Diagnosis applicable for this service or product.

      ShortApplicable diagnoses
      Control0..*
      TypepositiveInt
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      Need to related the product or service to the associated diagnoses.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      204. Claim.item.procedureSequence
      Definition

      Procedures applicable for this service or product.

      ShortApplicable procedures
      Control0..*
      TypepositiveInt
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      Need to provide any listed specific procedures to support the product or service being claimed.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      206. Claim.item.informationSequence
      Definition

      Exceptions, special conditions and supporting information applicable for this service or product.

      ShortApplicable exception and supporting information
      Control0..*
      TypepositiveInt
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      Need to reference the supporting information items that relate directly to this product or service.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      208. Claim.item.revenue
      Definition

      The type of revenue or cost center providing the product and/or service.

      ShortRevenue or cost center code
      Control0..1
      BindingFor example codes, see ExampleRevenueCenterCodes
      (example to http://hl7.org/fhir/ValueSet/ex-revenue-center|4.0.1)

      Codes for the revenue or cost centers supplying the service and/or products.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Needed in the processing of institutional claims.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      210. Claim.item.category
      Definition

      Code to identify the general type of benefits under which products and services are provided.

      ShortBenefit classification
      Comments

      Examples include Medical Care, Periodontics, Renal Dialysis, Vision Coverage.

      Control0..1
      BindingFor example codes, see BenefitCategoryCodes
      (example to http://hl7.org/fhir/ValueSet/ex-benefitcategory|4.0.1)

      Benefit categories such as: oral-basic, major, glasses.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Needed in the processing of institutional claims as this allows the insurer to determine whether a facial X-Ray is for dental, orthopedic, or facial surgery purposes.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      212. Claim.item.productOrService
      Definition

      When the value is a group code then this item collects a set of related claim details, otherwise this contains the product, service, drug or other billing code for the item.

      ShortBilling, service, product, or drug code
      Comments

      If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

      Control1..1
      BindingFor example codes, see USCLSCodes
      (example to http://hl7.org/fhir/ValueSet/service-uscls|4.0.1)

      Allowable service and product codes.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Necessary to state what was provided or done.

      Alternate NamesDrug Code, Bill Code, Service Code
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      214. Claim.item.modifier
      Definition

      Item typification or modifiers codes to convey additional context for the product or service.

      ShortProduct or service billing modifiers
      Comments

      For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or outside of office hours.

      Control0..*
      BindingFor example codes, see ModifierTypeCodes
      (example to http://hl7.org/fhir/ValueSet/claim-modifiers|4.0.1)

      Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      To support inclusion of the item for adjudication or to charge an elevated fee.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      216. Claim.item.programCode
      Definition

      Identifies the program under which this may be recovered.

      ShortProgram the product or service is provided under
      Comments

      For example: Neonatal program, child dental program or drug users recovery program.

      Control0..*
      BindingFor example codes, see ExampleProgramReasonCodes
      (example to http://hl7.org/fhir/ValueSet/ex-program-code|4.0.1)

      Program specific reason codes.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Commonly used in in the identification of publicly provided program focused on population segments or disease classifications.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      218. Claim.item.serviced[x]
      Definition

      The date or dates when the service or product was supplied, performed or completed.

      ShortDate or dates of service or product delivery
      Control0..1
      TypeChoice of: date, Period
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      Needed to determine whether the service or product was provided during the term of the insurance coverage.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      220. Claim.item.location[x]
      Definition

      Where the product or service was provided.

      ShortPlace of service or where product was supplied
      Control0..1
      BindingFor example codes, see ExampleServicePlaceCodes
      (example to http://hl7.org/fhir/ValueSet/service-place|4.0.1)

      Place of service: pharmacy, school, prison, etc.

      TypeChoice of: CodeableConcept, Address, Reference(Location)
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Summaryfalse
      Requirements

      The location can alter whether the item was acceptable for insurance purposes or impact the determination of the benefit amount.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      222. Claim.item.quantity
      Definition

      The number of repetitions of a service or product.

      ShortCount of products or services
      Control0..1
      TypeQuantity(SimpleQuantity)
      Is Modifierfalse
      Summaryfalse
      Requirements

      Required when the product or service code does not convey the quantity provided.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      224. Claim.item.unitPrice
      Definition

      If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

      ShortFee, charge or cost per item
      Control0..1
      TypeMoney
      Is Modifierfalse
      Summaryfalse
      Requirements

      The amount charged to the patient by the provider for a single unit.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      226. Claim.item.factor
      Definition

      A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

      ShortPrice scaling factor
      Comments

      To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

      Control0..1
      Typedecimal
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      228. Claim.item.net
      Definition

      The quantity times the unit price for an additional service or product or charge.

      ShortTotal item cost
      Comments

      For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

      Control0..1
      TypeMoney
      Is Modifierfalse
      Summaryfalse
      Requirements

      Provides the total amount claimed for the group (if a grouper) or the line item.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      230. Claim.item.udi
      Definition

      Unique Device Identifiers associated with this line item.

      ShortUnique device identifier
      Control0..*
      TypeReference(Device)
      Is Modifierfalse
      Summaryfalse
      Requirements

      The UDI code allows the insurer to obtain device level information on the product supplied.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      232. Claim.item.bodySite
      Definition

      Physical service site on the patient (limb, tooth, etc.).

      ShortAnatomical location
      Comments

      For example: Providing a tooth code, allows an insurer to identify a provider performing a filling on a tooth that was previously removed.

      Control0..1
      BindingFor example codes, see OralSiteCodes
      (example to http://hl7.org/fhir/ValueSet/tooth|4.0.1)

      The code for the teeth, quadrant, sextant and arch.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Allows insurer to validate specific procedures.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      234. Claim.item.subSite
      Definition

      A region or surface of the bodySite, e.g. limb region or tooth surface(s).

      ShortAnatomical sub-location
      Control0..*
      BindingFor example codes, see SurfaceCodes
      (example to http://hl7.org/fhir/ValueSet/surface|4.0.1)

      The code for the tooth surface and surface combinations.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Allows insurer to validate specific procedures.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      236. Claim.item.encounter
      Definition

      The Encounters during which this Claim was created or to which the creation of this record is tightly associated.

      ShortEncounters related to this billed item
      Comments

      This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

      Control0..*
      TypeReference(Encounter)
      Is Modifierfalse
      Summaryfalse
      Requirements

      Used in some jurisdictions to link clinical events to claim items.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      238. Claim.item.detail
      Definition

      A claim detail line. Either a simple (a product or service) or a 'group' of sub-details which are simple items.

      ShortProduct or service provided
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summaryfalse
      Requirements

      The items to be processed for adjudication.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      240. Claim.item.detail.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      242. Claim.item.detail.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      244. Claim.item.detail.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      246. Claim.item.detail.sequence
      Definition

      A number to uniquely identify item entries.

      ShortItem instance identifier
      Control1..1
      TypepositiveInt
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      Necessary to provide a mechanism to link to items from within the claim and within the adjudication details of the ClaimResponse.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      248. Claim.item.detail.revenue
      Definition

      The type of revenue or cost center providing the product and/or service.

      ShortRevenue or cost center code
      Control0..1
      BindingFor example codes, see ExampleRevenueCenterCodes
      (example to http://hl7.org/fhir/ValueSet/ex-revenue-center|4.0.1)

      Codes for the revenue or cost centers supplying the service and/or products.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Needed in the processing of institutional claims.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      250. Claim.item.detail.category
      Definition

      Code to identify the general type of benefits under which products and services are provided.

      ShortBenefit classification
      Comments

      Examples include Medical Care, Periodontics, Renal Dialysis, Vision Coverage.

      Control0..1
      BindingFor example codes, see BenefitCategoryCodes
      (example to http://hl7.org/fhir/ValueSet/ex-benefitcategory|4.0.1)

      Benefit categories such as: oral-basic, major, glasses.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Needed in the processing of institutional claims as this allows the insurer to determine whether a facial X-Ray is for dental, orthopedic, or facial surgery purposes.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      252. Claim.item.detail.productOrService
      Definition

      When the value is a group code then this item collects a set of related claim details, otherwise this contains the product, service, drug or other billing code for the item.

      ShortBilling, service, product, or drug code
      Comments

      If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

      Control1..1
      BindingFor example codes, see USCLSCodes
      (example to http://hl7.org/fhir/ValueSet/service-uscls|4.0.1)

      Allowable service and product codes.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Necessary to state what was provided or done.

      Alternate NamesDrug Code, Bill Code, Service Code
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      254. Claim.item.detail.modifier
      Definition

      Item typification or modifiers codes to convey additional context for the product or service.

      ShortService/Product billing modifiers
      Comments

      For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or out of office hours.

      Control0..*
      BindingFor example codes, see ModifierTypeCodes
      (example to http://hl7.org/fhir/ValueSet/claim-modifiers|4.0.1)

      Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      To support inclusion of the item for adjudication or to charge an elevated fee.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      256. Claim.item.detail.programCode
      Definition

      Identifies the program under which this may be recovered.

      ShortProgram the product or service is provided under
      Comments

      For example: Neonatal program, child dental program or drug users recovery program.

      Control0..*
      BindingFor example codes, see ExampleProgramReasonCodes
      (example to http://hl7.org/fhir/ValueSet/ex-program-code|4.0.1)

      Program specific reason codes.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Commonly used in in the identification of publicly provided program focused on population segments or disease classifications.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      258. Claim.item.detail.quantity
      Definition

      The number of repetitions of a service or product.

      ShortCount of products or services
      Control0..1
      TypeQuantity(SimpleQuantity)
      Is Modifierfalse
      Summaryfalse
      Requirements

      Required when the product or service code does not convey the quantity provided.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      260. Claim.item.detail.unitPrice
      Definition

      If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

      ShortFee, charge or cost per item
      Control0..1
      TypeMoney
      Is Modifierfalse
      Summaryfalse
      Requirements

      The amount charged to the patient by the provider for a single unit.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      262. Claim.item.detail.factor
      Definition

      A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

      ShortPrice scaling factor
      Comments

      To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

      Control0..1
      Typedecimal
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      264. Claim.item.detail.net
      Definition

      The quantity times the unit price for an additional service or product or charge.

      ShortTotal item cost
      Comments

      For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

      Control0..1
      TypeMoney
      Is Modifierfalse
      Summaryfalse
      Requirements

      Provides the total amount claimed for the group (if a grouper) or the line item.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      266. Claim.item.detail.udi
      Definition

      Unique Device Identifiers associated with this line item.

      ShortUnique device identifier
      Control0..*
      TypeReference(Device)
      Is Modifierfalse
      Summaryfalse
      Requirements

      The UDI code allows the insurer to obtain device level information on the product supplied.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      268. Claim.item.detail.subDetail
      Definition

      A claim detail line. Either a simple (a product or service) or a 'group' of sub-details which are simple items.

      ShortProduct or service provided
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summaryfalse
      Requirements

      The items to be processed for adjudication.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      270. Claim.item.detail.subDetail.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      272. Claim.item.detail.subDetail.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      274. Claim.item.detail.subDetail.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      276. Claim.item.detail.subDetail.sequence
      Definition

      A number to uniquely identify item entries.

      ShortItem instance identifier
      Control1..1
      TypepositiveInt
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      Necessary to provide a mechanism to link to items from within the claim and within the adjudication details of the ClaimResponse.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      278. Claim.item.detail.subDetail.revenue
      Definition

      The type of revenue or cost center providing the product and/or service.

      ShortRevenue or cost center code
      Control0..1
      BindingFor example codes, see ExampleRevenueCenterCodes
      (example to http://hl7.org/fhir/ValueSet/ex-revenue-center|4.0.1)

      Codes for the revenue or cost centers supplying the service and/or products.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Needed in the processing of institutional claims.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      280. Claim.item.detail.subDetail.category
      Definition

      Code to identify the general type of benefits under which products and services are provided.

      ShortBenefit classification
      Comments

      Examples include Medical Care, Periodontics, Renal Dialysis, Vision Coverage.

      Control0..1
      BindingFor example codes, see BenefitCategoryCodes
      (example to http://hl7.org/fhir/ValueSet/ex-benefitcategory|4.0.1)

      Benefit categories such as: oral-basic, major, glasses.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Needed in the processing of institutional claims as this allows the insurer to determine whether a facial X-Ray is for dental, orthopedic, or facial surgery purposes.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      282. Claim.item.detail.subDetail.productOrService
      Definition

      When the value is a group code then this item collects a set of related claim details, otherwise this contains the product, service, drug or other billing code for the item.

      ShortBilling, service, product, or drug code
      Comments

      If this is an actual service or product line, i.e. not a Group, then use code to indicate the Professional Service or Product supplied (e.g. CTP, HCPCS, USCLS, ICD10, NCPDP, DIN, RxNorm, ACHI, CCI). If a grouping item then use a group code to indicate the type of thing being grouped e.g. 'glasses' or 'compound'.

      Control1..1
      BindingFor example codes, see USCLSCodes
      (example to http://hl7.org/fhir/ValueSet/service-uscls|4.0.1)

      Allowable service and product codes.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Necessary to state what was provided or done.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      284. Claim.item.detail.subDetail.modifier
      Definition

      Item typification or modifiers codes to convey additional context for the product or service.

      ShortService/Product billing modifiers
      Comments

      For example in Oral whether the treatment is cosmetic or associated with TMJ, or for Medical whether the treatment was outside the clinic or out of office hours.

      Control0..*
      BindingFor example codes, see ModifierTypeCodes
      (example to http://hl7.org/fhir/ValueSet/claim-modifiers|4.0.1)

      Item type or modifiers codes, eg for Oral whether the treatment is cosmetic or associated with TMJ, or an appliance was lost or stolen.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      To support inclusion of the item for adjudication or to charge an elevated fee.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      286. Claim.item.detail.subDetail.programCode
      Definition

      Identifies the program under which this may be recovered.

      ShortProgram the product or service is provided under
      Comments

      For example: Neonatal program, child dental program or drug users recovery program.

      Control0..*
      BindingFor example codes, see ExampleProgramReasonCodes
      (example to http://hl7.org/fhir/ValueSet/ex-program-code|4.0.1)

      Program specific reason codes.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Commonly used in in the identification of publicly provided program focused on population segments or disease classifications.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      288. Claim.item.detail.subDetail.quantity
      Definition

      The number of repetitions of a service or product.

      ShortCount of products or services
      Control0..1
      TypeQuantity(SimpleQuantity)
      Is Modifierfalse
      Summaryfalse
      Requirements

      Required when the product or service code does not convey the quantity provided.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      290. Claim.item.detail.subDetail.unitPrice
      Definition

      If the item is not a group then this is the fee for the product or service, otherwise this is the total of the fees for the details of the group.

      ShortFee, charge or cost per item
      Control0..1
      TypeMoney
      Is Modifierfalse
      Summaryfalse
      Requirements

      The amount charged to the patient by the provider for a single unit.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      292. Claim.item.detail.subDetail.factor
      Definition

      A real number that represents a multiplier used in determining the overall value of services delivered and/or goods received. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

      ShortPrice scaling factor
      Comments

      To show a 10% senior's discount, the value entered is: 0.90 (1.00 - 0.10).

      Control0..1
      Typedecimal
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      When discounts are provided to a patient (example: Senior's discount) then this must be documented for adjudication.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      294. Claim.item.detail.subDetail.net
      Definition

      The quantity times the unit price for an additional service or product or charge.

      ShortTotal item cost
      Comments

      For example, the formula: quantity * unitPrice * factor = net. Quantity and factor are assumed to be 1 if not supplied.

      Control0..1
      TypeMoney
      Is Modifierfalse
      Summaryfalse
      Requirements

      Provides the total amount claimed for the group (if a grouper) or the line item.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      296. Claim.item.detail.subDetail.udi
      Definition

      Unique Device Identifiers associated with this line item.

      ShortUnique device identifier
      Control0..*
      TypeReference(Device)
      Is Modifierfalse
      Summaryfalse
      Requirements

      The UDI code allows the insurer to obtain device level information on the product supplied.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      298. Claim.total
      Definition

      The total value of the all the items in the claim.

      ShortTotal claim cost
      Control0..1
      TypeMoney
      Is Modifierfalse
      Summaryfalse
      Requirements

      Used for control total purposes.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))