The (Real Time) Sample Array (RTSA) Observation Profile is used when the measurement is a periodic sequences of scalars in time, typically waveforms. In theory, this measurement could be split up into a sequence of Numeric Observations but that would be inefficient especially if one is talking about a 1000 samples per second or more. Waveforms are used for spirometry, ECG, pulse oximeter pleth wave traces, etc. This profile is used to represent ACOM Sample Array Observations.

The values are scaled to reduced bandwidth. The bandwidth reduction can be significant in cases where the actual values are small fluctuations about a large average value. The scale factors, number of bits in each sample, the period, and the number of samples in the sequence are given by a set of support attributes.

IEEE 11073-10206 ACOM and GHS support the concept of multi-dimensional arrays. Reporting a sequence of x, y, z acceleration components from a PHD can be done by reporting 3 samples per period, that all share the same unit and scaling factors. FHIR also support the concept of multi-dimensional arrays.

When mapping the samples directly to FHIR SampledData.data, the FHIR scale factor and origin can be derived from this:

• SampledData.factor = (B-A)/(J-I)
• SampledData.origin = (A*J - B*I)/ (J-I)

A graphing application could use the Actual-range limits to define the upper and lower ranges of a graph and be assured that the waveform would never go above or below those boundaries. These upper and lower boundaries are scaled and placed in the SampledData.lowerLimit and SampledData.upperLimit elements, respectively.

• Key Elements Table
• Differential Table
• Snapshot Table
• Statistics/References
• All

Name	Flags	Card.	Type	Description & Constraints    Filter: Bindings Constraints Obligations
Observation	C	0..*	PhdBaseObservation	Measurements and simple assertions Constraints: obs-6, obs-7
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created
Slices for extension		1..*	Extension	Extension Slice: Unordered, Open by value:url
extension:GatewayDevice		1..1	(Complex)	Gateway Device URL: http://hl7.org/fhir/StructureDefinition/observation-gatewayDevice
extension		0..0
url		1..1	uri	"http://hl7.org/fhir/StructureDefinition/observation-gatewayDevice"
value[x]		1..1	Reference(PhgDevice)	Reference to the PHG Device
extension:CoincidentTimeStamp		0..1	Reference(PhdCoincidentTimeStampObservation)	Coincident Timestamp Reference URL: http://hl7.org/fhir/uv/phd/StructureDefinition/CoincidentTimeStampReference
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored
Slices for identifier	Σ	0..*	Identifier	Business Identifier for observation Slice: Unordered, Open by value:system
identifier:conditionalCreate	Σ	0..1	Identifier	Unique identifier of this measurement for a given patient and device
use	?!Σ	0..1	code	usual | official | temp | secondary | old (If known) Binding: IdentifierUse (required): Identifies the purpose for this identifier, if known .
system	Σ	1..1	uri	The namespace for the identifier value Fixed Value: http://hl7.org/fhir/uv/phd/StructureDefinition/PhdBaseObservation
value	Σ	1..1	string	The value that is unique Example General: 123456
status	?!Σ	1..1	code	registered | preliminary | final | amended + Binding: ObservationStatus (required): Codes providing the status of an observation.
Slices for category		1..*	CodeableConcept	Classification of type of observation Slice: Unordered, Open by value:coding.code, value:coding.system Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.
category:PHD-Observation		1..1	CodeableConcept	Classification of type of observation Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.
coding	Σ	1..*	Coding	Code defined by a terminology system
system	Σ	1..1	uri	Identity of the terminology system Fixed Value: http://hl7.org/fhir/uv/phd/CodeSystem/PhdObservationCategories
code	Σ	1..1	code	Symbol in syntax defined by the system Fixed Value: phd
code	ΣC	1..1	CodeableConcept	Type of observation (code / type) Binding: MDC Non-Object codes (extensible) Constraints: mdc-1
subject	Σ	1..1	Reference(Patient | PhdDevice)	Reference to the patient or the PhdDevice that is the subject of the observation
Slices for effective[x]	Σ	1..1		Clinically relevant time/time-period for observation Slice: Unordered, Closed by type:$this
effectiveDateTime			dateTime
effectivePeriod			Period
effective[x]:effectiveDateTime	Σ	0..1	dateTime	Clinically relevant time/time-period for observation
effective[x]:effectivePeriod	Σ	0..1	Period	Clinically relevant time/time-period for observation
value[x]	ΣC	0..1	SampledData	Actual result
origin	Σ	1..1	SimpleQuantity	Zero value and units
value	Σ	1..1	decimal	Intercept value (with implicit precision)
unit	Σ	0..1	string	Unit representation
system	ΣC	1..1	uri	The UCUM coding system Fixed Value: http://unitsofmeasure.org
code	Σ	1..1	code	Coded form of the unit
period	Σ	1..1	decimal	Number of milliseconds between samples
factor	Σ	1..1	decimal	The scale factor
lowerLimit	Σ	0..1	decimal	The scaled lower limit of the ACOM sample array when provided by the PHD device.
upperLimit	Σ	0..1	decimal	The scaled upper limit of the ACOM sample array when provided by the PHD device.
dimensions	Σ	1..1	positiveInt	Number of sample points at each time point
data		0..1	string	Decimal values with spaces, or "E" | "U" | "L"
device		1..1	Reference(PhdDevice)	(Measurement) Device
reference	ΣC	1..1	string	Reference to the device responsible for the measurement
Slices for component	Σ	0..*	BackboneElement	Component results Slice: Unordered, Open by value:code
component:All Slices				Content/Rules for all slices
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.
component:supplementalTypesComponent	Σ	0..*	BackboneElement	Supplemental Type: A further description of the measurement type.
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (Complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: urn:iso:std:iso:11073:10101
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 68193
display		0..1	string	Representation defined by the system
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
coding	Σ	1..*	Coding	Code defined by a terminology system
system	Σ	1..1	uri	Identity of the terminology system Fixed Value: urn:iso:std:iso:11073:10101
code	Σ	1..1	code	Symbol in syntax defined by the system Fixed Value: 68193
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet / Code	URI
Observation.identifier:conditionalCreate.use	required	IdentifierUse http://hl7.org/fhir/ValueSet/identifier-use|4.0.1 From the FHIR Standard
Observation.status	required	ObservationStatus http://hl7.org/fhir/ValueSet/observation-status|4.0.1 From the FHIR Standard
Observation.category	preferred	ObservationCategoryCodes http://hl7.org/fhir/ValueSet/observation-category From the FHIR Standard
Observation.category:PHD-Observation	preferred	ObservationCategoryCodes http://hl7.org/fhir/ValueSet/observation-category From the FHIR Standard
Observation.code	extensible	MDCnotObject http://hl7.org/fhir/uv/phd/ValueSet/MDCnotObject From this IG
Observation.component.code	example	LOINCCodes(a valid code from LOINC) http://hl7.org/fhir/ValueSet/observation-codes From the FHIR Standard
Observation.component:supplementalTypesComponent.code	example	Pattern Value: 68193 http://hl7.org/fhir/ValueSet/observation-codes From the FHIR Standard

Constraints

Id	Grade	Path(s)	Details	Requirements
dom-2	error	Observation	If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty()
dom-3	error	Observation	If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4	error	Observation	If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5	error	Observation	If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty()
dom-6	best practice	Observation	A resource should have narrative for robust management : text.`div`.exists()
ele-1	error	**ALL** elements	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	**ALL** extensions	Must have either extensions or value[x], not both : extension.exists() != value.exists()
mdc-1	warning	Observation.code	A published MDC Code is preferred but private MDC codes are allowed as well. : coding.exists() and coding.where(system = 'urn:iso:std:iso:11073:10101').exists()
obs-6	error	Observation	dataAbsentReason SHALL only be present if Observation.value[x] is not present : dataAbsentReason.empty() or value.empty()
obs-7	error	Observation	If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present : value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()

This structure is derived from PhdBaseObservation

Name	Flags	Card.	Type	Description & Constraints    Filter: Bindings Constraints Obligations
Observation		0..*	PhdBaseObservation	Measurements and simple assertions
value[x]		0..1	SampledData	Actual result
origin		1..1	SimpleQuantity	Zero value and units
value		1..1	decimal	Intercept value (with implicit precision)
unit		0..1	string	Unit representation
system		1..1	uri	The UCUM coding system Fixed Value: http://unitsofmeasure.org
code		1..1	code	Coded form of the unit
period		1..1	decimal	Number of milliseconds between samples
factor		1..1	decimal	The scale factor
lowerLimit		0..1	decimal	The scaled lower limit of the ACOM sample array when provided by the PHD device.
upperLimit		0..1	decimal	The scaled upper limit of the ACOM sample array when provided by the PHD device.
dimensions		1..1	positiveInt	Number of sample points at each time point
data		0..1	string	Decimal values with spaces, or "E" | "U" | "L"
Documentation for this format

Name	Flags	Card.	Type	Description & Constraints    Filter: Bindings Constraints Obligations
Observation	C	0..*	PhdBaseObservation	Measurements and simple assertions Constraints: obs-6, obs-7
id	Σ	0..1	id	Logical id of this artifact
meta	Σ	0..1	Meta	Metadata about the resource
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
versionId	Σ	0..1	id	Version specific identifier
lastUpdated	Σ	0..1	instant	When the resource version last changed
source	Σ	0..1	uri	Identifies where the resource comes from
profile	Σ	0..*	canonical(StructureDefinition)	Profiles this resource claims to conform to
Slices for security	Σ	0..*	Coding	Security Labels applied to this resource Slice: Unordered, Open by value:system, value:code Binding: All Security Labels (extensible): Security Labels from the Healthcare Privacy and Security Classification System.
security:PhdHtest	Σ	0..1	Coding	Security value set to HTEST when measurement status indicates demo or test data Binding: All Security Labels (extensible): Security Labels from the Healthcare Privacy and Security Classification System.
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
system	Σ	1..1	uri	Identity of the terminology system Fixed Value: http://terminology.hl7.org/CodeSystem/v3-ActReason
version	Σ	0..1	string	Version of the system - if relevant
code	Σ	1..1	code	Symbol in syntax defined by the system Fixed Value: HTEST
display	Σ	0..1	string	Representation defined by the system
userSelected	Σ	0..1	boolean	If this coding was chosen directly by the user
tag	Σ	0..*	Coding	Tags applied to this resource Binding: CommonTags (example): Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created
language		0..1	code	Language of the resource content Binding: CommonLanguages (preferred): A human language. Additional Bindings Purpose AllLanguages Max Binding
text		0..1	Narrative	Text summary of the resource, for human interpretation This profile does not constrain the narrative in regard to content, language, or traceability to data elements
contained		0..*	Resource	Contained, inline Resources
Slices for extension		1..*	Extension	Extension Slice: Unordered, Open by value:url
extension:GatewayDevice		1..1	(Complex)	Gateway Device URL: http://hl7.org/fhir/StructureDefinition/observation-gatewayDevice
id		0..1	string	Unique id for inter-element referencing
extension		0..0
url		1..1	uri	"http://hl7.org/fhir/StructureDefinition/observation-gatewayDevice"
value[x]		1..1	Reference(PhgDevice)	Reference to the PHG Device
extension:CoincidentTimeStamp		0..1	Reference(PhdCoincidentTimeStampObservation)	Coincident Timestamp Reference URL: http://hl7.org/fhir/uv/phd/StructureDefinition/CoincidentTimeStampReference
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored
Slices for identifier	Σ	0..*	Identifier	Business Identifier for observation Slice: Unordered, Open by value:system
identifier:conditionalCreate	Σ	0..1	Identifier	Unique identifier of this measurement for a given patient and device
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
use	?!Σ	0..1	code	usual | official | temp | secondary | old (If known) Binding: IdentifierUse (required): Identifies the purpose for this identifier, if known .
system	Σ	1..1	uri	The namespace for the identifier value Fixed Value: http://hl7.org/fhir/uv/phd/StructureDefinition/PhdBaseObservation
value	Σ	1..1	string	The value that is unique Example General: 123456
period	Σ	0..1	Period	Time period when id is/was valid for use
assigner	Σ	0..1	Reference(Organization)	Organization that issued id (may be just text)
basedOn	Σ	0..*	Reference(CarePlan | DeviceRequest | ImmunizationRecommendation | MedicationRequest | NutritionOrder | ServiceRequest)	Fulfills plan, proposal or order
partOf	Σ	0..*	Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy)	Part of referenced event
status	?!Σ	1..1	code	registered | preliminary | final | amended + Binding: ObservationStatus (required): Codes providing the status of an observation.
Slices for category		1..*	CodeableConcept	Classification of type of observation Slice: Unordered, Open by value:coding.code, value:coding.system Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.
category:PHD-Observation		1..1	CodeableConcept	Classification of type of observation Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
coding	Σ	1..*	Coding	Code defined by a terminology system
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
system	Σ	1..1	uri	Identity of the terminology system Fixed Value: http://hl7.org/fhir/uv/phd/CodeSystem/PhdObservationCategories
version	Σ	0..1	string	Version of the system - if relevant
code	Σ	1..1	code	Symbol in syntax defined by the system Fixed Value: phd
display	Σ	0..1	string	Representation defined by the system
userSelected	Σ	0..1	boolean	If this coding was chosen directly by the user
text	Σ	0..1	string	Plain text representation of the concept
code	ΣC	1..1	CodeableConcept	Type of observation (code / type) Binding: MDC Non-Object codes (extensible) Constraints: mdc-1
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
coding	Σ	0..*	Coding	Code defined by a terminology system
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
system	Σ	0..1	uri	Identity of the terminology system
version	Σ	0..1	string	Version of the system - if relevant
code	Σ	0..1	code	Symbol in syntax defined by the system
display	Σ	0..1	string	Representation defined by the system
userSelected	Σ	0..1	boolean	If this coding was chosen directly by the user
text	Σ	0..1	string	Plain text representation of the concept
subject	Σ	1..1	Reference(Patient | PhdDevice)	Reference to the patient or the PhdDevice that is the subject of the observation
focus	Σ	0..*	Reference(Resource)	What the observation is about, when it is not about the subject of record
encounter	Σ	0..1	Reference(Encounter)	Healthcare event during which this observation is made
Slices for effective[x]	Σ	1..1		Clinically relevant time/time-period for observation Slice: Unordered, Closed by type:$this
effectiveDateTime			dateTime
effectivePeriod			Period
effective[x]:effectiveDateTime	Σ	0..1	dateTime	Clinically relevant time/time-period for observation
effective[x]:effectivePeriod	Σ	0..1	Period	Clinically relevant time/time-period for observation
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
start	ΣC	0..1	dateTime	Starting time with inclusive boundary
end	ΣC	0..1	dateTime	End time with inclusive boundary, if not ongoing
issued	Σ	0..1	instant	Date/Time this version was made available
performer	Σ	0..*	Reference(Practitioner | PractitionerRole | Organization | CareTeam | Patient | RelatedPerson)	Who is responsible for the observation
value[x]	ΣC	0..1	SampledData	Actual result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
origin	Σ	1..1	SimpleQuantity	Zero value and units
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	1..1	decimal	Intercept value (with implicit precision)
unit	Σ	0..1	string	Unit representation
system	ΣC	1..1	uri	The UCUM coding system Fixed Value: http://unitsofmeasure.org
code	Σ	1..1	code	Coded form of the unit
period	Σ	1..1	decimal	Number of milliseconds between samples
factor	Σ	1..1	decimal	The scale factor
lowerLimit	Σ	0..1	decimal	The scaled lower limit of the ACOM sample array when provided by the PHD device.
upperLimit	Σ	0..1	decimal	The scaled upper limit of the ACOM sample array when provided by the PHD device.
dimensions	Σ	1..1	positiveInt	Number of sample points at each time point
data		0..1	string	Decimal values with spaces, or "E" | "U" | "L"
dataAbsentReason	C	0..1	CodeableConcept	This element is populated when the Measurement Status indicates invalid, not available or measurement-ongoing. Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
coding	Σ	0..*	Coding	Code defined by a terminology system Binding: DataAbsentReason (required)
text	Σ	0..1	string	Plain text representation of the concept
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
Slices for coding	Σ	1..*	Coding	Code defined by a terminology system Slice: Unordered, Open by value:system
coding:MsmtStatusInterpretation	Σ	1..1	Coding	Measurement status interpretation when questionable, calibration-ongoing, validated, early-indication, threshold exceeded, alarm inhibited
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
system	Σ	1..1	uri	Identity of the terminology system Fixed Value: http://hl7.org/fhir/uv/pocd/CodeSystem/measurement-status
version	Σ	0..1	string	Version of the system - if relevant
code	Σ	1..1	code	Symbol in syntax defined by the system
display	Σ	0..1	string	Representation defined by the system
userSelected	Σ	0..1	boolean	If this coding was chosen directly by the user
text	Σ	0..1	string	Plain text representation of the concept
note		0..*	Annotation	Comments about the observation
bodySite		0..1	CodeableConcept	Observed body part Binding: SNOMEDCTBodyStructures (example): Codes describing anatomical locations. May include laterality.
method		0..1	CodeableConcept	How it was done Binding: ObservationMethods (example): Methods for simple observations.
specimen		0..1	Reference(Specimen)	Specimen used for this observation
device		1..1	Reference(PhdDevice)	(Measurement) Device
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
reference	ΣC	1..1	string	Reference to the device responsible for the measurement
type	Σ	0..1	uri	Type the reference refers to (e.g. "Patient") Binding: ResourceType (extensible): Aa resource (or, for logical models, the URI of the logical model).
identifier	Σ	0..1	Identifier	Logical reference, when literal reference is not known
display	Σ	0..1	string	Text alternative for the resource
referenceRange	C	0..*	BackboneElement	Provides guide for interpretation Constraints: obs-3
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
low	C	0..1	SimpleQuantity	Low Range, if relevant
high	C	0..1	SimpleQuantity	High Range, if relevant
type		0..1	CodeableConcept	Reference range qualifier Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.
appliesTo		0..*	CodeableConcept	Reference range population Binding: ObservationReferenceRangeAppliesToCodes (example): Codes identifying the population the reference range applies to.
age		0..1	Range	Applicable age range, if relevant
text		0..1	string	Text based reference range in an observation
hasMember	Σ	0..*	Reference(PhdBaseObservation)	Other PHD Observations that are part of this group observation.
derivedFrom	Σ	0..*	Reference(PhdBaseObservation)	A source the measurement data is derived from.
Slices for component	Σ	0..*	BackboneElement	Component results Slice: Unordered, Open by value:code
component:All Slices				Content/Rules for all slices
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.
value[x]	Σ	0..1		Actual component result
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:supplementalTypesComponent	Σ	0..*	BackboneElement	Supplemental Type: A further description of the measurement type.
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (Complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: urn:iso:std:iso:11073:10101
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 68193
display		0..1	string	Representation defined by the system
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
coding	Σ	1..*	Coding	Code defined by a terminology system
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
system	Σ	1..1	uri	Identity of the terminology system Fixed Value: urn:iso:std:iso:11073:10101
version	Σ	0..1	string	Version of the system - if relevant
code	Σ	1..1	code	Symbol in syntax defined by the system Fixed Value: 68193
display	Σ	0..1	string	Representation defined by the system
userSelected	Σ	0..1	boolean	If this coding was chosen directly by the user
text	Σ	0..1	string	Plain text representation of the concept
value[x]	Σ	0..1	CodeableConcept	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
coding	Σ	0..*	Coding	Code defined by a terminology system
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
system	Σ	1..1	uri	Identity of the terminology system Fixed Value: urn:iso:std:iso:11073:10101
version	Σ	0..1	string	Version of the system - if relevant
code	Σ	1..1	code	Symbol in syntax defined by the system
display	Σ	0..1	string	Representation defined by the system
userSelected	Σ	0..1	boolean	If this coding was chosen directly by the user
text	Σ	0..1	string	Plain text representation of the concept
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet / Code	URI
Observation.meta.security	extensible	All Security Labels http://hl7.org/fhir/ValueSet/security-labels From the FHIR Standard
Observation.meta.security:PhdHtest	extensible	Fixed Value: HTEST http://hl7.org/fhir/ValueSet/security-labels From the FHIR Standard
Observation.meta.tag	example	CommonTags http://hl7.org/fhir/ValueSet/common-tags From the FHIR Standard
Observation.language	preferred	CommonLanguages http://hl7.org/fhir/ValueSet/languages From the FHIR Standard Additional Bindings Purpose AllLanguages Max Binding
Observation.identifier:conditionalCreate.use	required	IdentifierUse http://hl7.org/fhir/ValueSet/identifier-use|4.0.1 From the FHIR Standard
Observation.status	required	ObservationStatus http://hl7.org/fhir/ValueSet/observation-status|4.0.1 From the FHIR Standard
Observation.category	preferred	ObservationCategoryCodes http://hl7.org/fhir/ValueSet/observation-category From the FHIR Standard
Observation.category:PHD-Observation	preferred	ObservationCategoryCodes http://hl7.org/fhir/ValueSet/observation-category From the FHIR Standard
Observation.code	extensible	MDCnotObject http://hl7.org/fhir/uv/phd/ValueSet/MDCnotObject From this IG
Observation.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason From the FHIR Standard
Observation.dataAbsentReason.coding	required	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason From the FHIR Standard
Observation.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation From the FHIR Standard
Observation.bodySite	example	SNOMEDCTBodyStructures http://hl7.org/fhir/ValueSet/body-site From the FHIR Standard
Observation.method	example	ObservationMethods http://hl7.org/fhir/ValueSet/observation-methods From the FHIR Standard
Observation.device.type	extensible	ResourceType http://hl7.org/fhir/ValueSet/resource-types From the FHIR Standard
Observation.referenceRange.type	preferred	ObservationReferenceRangeMeaningCodes http://hl7.org/fhir/ValueSet/referencerange-meaning From the FHIR Standard
Observation.referenceRange.appliesTo	example	ObservationReferenceRangeAppliesToCodes http://hl7.org/fhir/ValueSet/referencerange-appliesto From the FHIR Standard
Observation.component.code	example	LOINCCodes(a valid code from LOINC) http://hl7.org/fhir/ValueSet/observation-codes From the FHIR Standard
Observation.component.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason From the FHIR Standard
Observation.component.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation From the FHIR Standard
Observation.component:supplementalTypesComponent.code	example	Pattern Value: 68193 http://hl7.org/fhir/ValueSet/observation-codes From the FHIR Standard
Observation.component:supplementalTypesComponent.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation From the FHIR Standard

Constraints

Id	Grade	Path(s)	Details	Requirements
dom-2	error	Observation	If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty()
dom-3	error	Observation	If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4	error	Observation	If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5	error	Observation	If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty()
dom-6	best practice	Observation	A resource should have narrative for robust management : text.`div`.exists()
ele-1	error	**ALL** elements	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	**ALL** extensions	Must have either extensions or value[x], not both : extension.exists() != value.exists()
mdc-1	warning	Observation.code	A published MDC Code is preferred but private MDC codes are allowed as well. : coding.exists() and coding.where(system = 'urn:iso:std:iso:11073:10101').exists()
obs-3	error	Observation.referenceRange	Must have at least a low or a high or text : low.exists() or high.exists() or text.exists()
obs-6	error	Observation	dataAbsentReason SHALL only be present if Observation.value[x] is not present : dataAbsentReason.empty() or value.empty()
obs-7	error	Observation	If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present : value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()

Key Elements View

Name	Flags	Card.	Type	Description & Constraints    Filter: Bindings Constraints Obligations
Observation	C	0..*	PhdBaseObservation	Measurements and simple assertions Constraints: obs-6, obs-7
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created
Slices for extension		1..*	Extension	Extension Slice: Unordered, Open by value:url
extension:GatewayDevice		1..1	(Complex)	Gateway Device URL: http://hl7.org/fhir/StructureDefinition/observation-gatewayDevice
extension		0..0
url		1..1	uri	"http://hl7.org/fhir/StructureDefinition/observation-gatewayDevice"
value[x]		1..1	Reference(PhgDevice)	Reference to the PHG Device
extension:CoincidentTimeStamp		0..1	Reference(PhdCoincidentTimeStampObservation)	Coincident Timestamp Reference URL: http://hl7.org/fhir/uv/phd/StructureDefinition/CoincidentTimeStampReference
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored
Slices for identifier	Σ	0..*	Identifier	Business Identifier for observation Slice: Unordered, Open by value:system
identifier:conditionalCreate	Σ	0..1	Identifier	Unique identifier of this measurement for a given patient and device
use	?!Σ	0..1	code	usual | official | temp | secondary | old (If known) Binding: IdentifierUse (required): Identifies the purpose for this identifier, if known .
system	Σ	1..1	uri	The namespace for the identifier value Fixed Value: http://hl7.org/fhir/uv/phd/StructureDefinition/PhdBaseObservation
value	Σ	1..1	string	The value that is unique Example General: 123456
status	?!Σ	1..1	code	registered | preliminary | final | amended + Binding: ObservationStatus (required): Codes providing the status of an observation.
Slices for category		1..*	CodeableConcept	Classification of type of observation Slice: Unordered, Open by value:coding.code, value:coding.system Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.
category:PHD-Observation		1..1	CodeableConcept	Classification of type of observation Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.
coding	Σ	1..*	Coding	Code defined by a terminology system
system	Σ	1..1	uri	Identity of the terminology system Fixed Value: http://hl7.org/fhir/uv/phd/CodeSystem/PhdObservationCategories
code	Σ	1..1	code	Symbol in syntax defined by the system Fixed Value: phd
code	ΣC	1..1	CodeableConcept	Type of observation (code / type) Binding: MDC Non-Object codes (extensible) Constraints: mdc-1
subject	Σ	1..1	Reference(Patient | PhdDevice)	Reference to the patient or the PhdDevice that is the subject of the observation
Slices for effective[x]	Σ	1..1		Clinically relevant time/time-period for observation Slice: Unordered, Closed by type:$this
effectiveDateTime			dateTime
effectivePeriod			Period
effective[x]:effectiveDateTime	Σ	0..1	dateTime	Clinically relevant time/time-period for observation
effective[x]:effectivePeriod	Σ	0..1	Period	Clinically relevant time/time-period for observation
value[x]	ΣC	0..1	SampledData	Actual result
origin	Σ	1..1	SimpleQuantity	Zero value and units
value	Σ	1..1	decimal	Intercept value (with implicit precision)
unit	Σ	0..1	string	Unit representation
system	ΣC	1..1	uri	The UCUM coding system Fixed Value: http://unitsofmeasure.org
code	Σ	1..1	code	Coded form of the unit
period	Σ	1..1	decimal	Number of milliseconds between samples
factor	Σ	1..1	decimal	The scale factor
lowerLimit	Σ	0..1	decimal	The scaled lower limit of the ACOM sample array when provided by the PHD device.
upperLimit	Σ	0..1	decimal	The scaled upper limit of the ACOM sample array when provided by the PHD device.
dimensions	Σ	1..1	positiveInt	Number of sample points at each time point
data		0..1	string	Decimal values with spaces, or "E" | "U" | "L"
device		1..1	Reference(PhdDevice)	(Measurement) Device
reference	ΣC	1..1	string	Reference to the device responsible for the measurement
Slices for component	Σ	0..*	BackboneElement	Component results Slice: Unordered, Open by value:code
component:All Slices				Content/Rules for all slices
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.
component:supplementalTypesComponent	Σ	0..*	BackboneElement	Supplemental Type: A further description of the measurement type.
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (Complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: urn:iso:std:iso:11073:10101
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 68193
display		0..1	string	Representation defined by the system
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
coding	Σ	1..*	Coding	Code defined by a terminology system
system	Σ	1..1	uri	Identity of the terminology system Fixed Value: urn:iso:std:iso:11073:10101
code	Σ	1..1	code	Symbol in syntax defined by the system Fixed Value: 68193
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet / Code	URI
Observation.identifier:conditionalCreate.use	required	IdentifierUse http://hl7.org/fhir/ValueSet/identifier-use|4.0.1 From the FHIR Standard
Observation.status	required	ObservationStatus http://hl7.org/fhir/ValueSet/observation-status|4.0.1 From the FHIR Standard
Observation.category	preferred	ObservationCategoryCodes http://hl7.org/fhir/ValueSet/observation-category From the FHIR Standard
Observation.category:PHD-Observation	preferred	ObservationCategoryCodes http://hl7.org/fhir/ValueSet/observation-category From the FHIR Standard
Observation.code	extensible	MDCnotObject http://hl7.org/fhir/uv/phd/ValueSet/MDCnotObject From this IG
Observation.component.code	example	LOINCCodes(a valid code from LOINC) http://hl7.org/fhir/ValueSet/observation-codes From the FHIR Standard
Observation.component:supplementalTypesComponent.code	example	Pattern Value: 68193 http://hl7.org/fhir/ValueSet/observation-codes From the FHIR Standard

Constraints

Id	Grade	Path(s)	Details	Requirements
dom-2	error	Observation	If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty()
dom-3	error	Observation	If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4	error	Observation	If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5	error	Observation	If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty()
dom-6	best practice	Observation	A resource should have narrative for robust management : text.`div`.exists()
ele-1	error	**ALL** elements	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	**ALL** extensions	Must have either extensions or value[x], not both : extension.exists() != value.exists()
mdc-1	warning	Observation.code	A published MDC Code is preferred but private MDC codes are allowed as well. : coding.exists() and coding.where(system = 'urn:iso:std:iso:11073:10101').exists()
obs-6	error	Observation	dataAbsentReason SHALL only be present if Observation.value[x] is not present : dataAbsentReason.empty() or value.empty()
obs-7	error	Observation	If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present : value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()

Differential View

This structure is derived from PhdBaseObservation

Name	Flags	Card.	Type	Description & Constraints    Filter: Bindings Constraints Obligations
Observation		0..*	PhdBaseObservation	Measurements and simple assertions
value[x]		0..1	SampledData	Actual result
origin		1..1	SimpleQuantity	Zero value and units
value		1..1	decimal	Intercept value (with implicit precision)
unit		0..1	string	Unit representation
system		1..1	uri	The UCUM coding system Fixed Value: http://unitsofmeasure.org
code		1..1	code	Coded form of the unit
period		1..1	decimal	Number of milliseconds between samples
factor		1..1	decimal	The scale factor
lowerLimit		0..1	decimal	The scaled lower limit of the ACOM sample array when provided by the PHD device.
upperLimit		0..1	decimal	The scaled upper limit of the ACOM sample array when provided by the PHD device.
dimensions		1..1	positiveInt	Number of sample points at each time point
data		0..1	string	Decimal values with spaces, or "E" | "U" | "L"
Documentation for this format

Snapshot View

Name	Flags	Card.	Type	Description & Constraints    Filter: Bindings Constraints Obligations
Observation	C	0..*	PhdBaseObservation	Measurements and simple assertions Constraints: obs-6, obs-7
id	Σ	0..1	id	Logical id of this artifact
meta	Σ	0..1	Meta	Metadata about the resource
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
versionId	Σ	0..1	id	Version specific identifier
lastUpdated	Σ	0..1	instant	When the resource version last changed
source	Σ	0..1	uri	Identifies where the resource comes from
profile	Σ	0..*	canonical(StructureDefinition)	Profiles this resource claims to conform to
Slices for security	Σ	0..*	Coding	Security Labels applied to this resource Slice: Unordered, Open by value:system, value:code Binding: All Security Labels (extensible): Security Labels from the Healthcare Privacy and Security Classification System.
security:PhdHtest	Σ	0..1	Coding	Security value set to HTEST when measurement status indicates demo or test data Binding: All Security Labels (extensible): Security Labels from the Healthcare Privacy and Security Classification System.
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
system	Σ	1..1	uri	Identity of the terminology system Fixed Value: http://terminology.hl7.org/CodeSystem/v3-ActReason
version	Σ	0..1	string	Version of the system - if relevant
code	Σ	1..1	code	Symbol in syntax defined by the system Fixed Value: HTEST
display	Σ	0..1	string	Representation defined by the system
userSelected	Σ	0..1	boolean	If this coding was chosen directly by the user
tag	Σ	0..*	Coding	Tags applied to this resource Binding: CommonTags (example): Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created
language		0..1	code	Language of the resource content Binding: CommonLanguages (preferred): A human language. Additional Bindings Purpose AllLanguages Max Binding
text		0..1	Narrative	Text summary of the resource, for human interpretation This profile does not constrain the narrative in regard to content, language, or traceability to data elements
contained		0..*	Resource	Contained, inline Resources
Slices for extension		1..*	Extension	Extension Slice: Unordered, Open by value:url
extension:GatewayDevice		1..1	(Complex)	Gateway Device URL: http://hl7.org/fhir/StructureDefinition/observation-gatewayDevice
id		0..1	string	Unique id for inter-element referencing
extension		0..0
url		1..1	uri	"http://hl7.org/fhir/StructureDefinition/observation-gatewayDevice"
value[x]		1..1	Reference(PhgDevice)	Reference to the PHG Device
extension:CoincidentTimeStamp		0..1	Reference(PhdCoincidentTimeStampObservation)	Coincident Timestamp Reference URL: http://hl7.org/fhir/uv/phd/StructureDefinition/CoincidentTimeStampReference
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored
Slices for identifier	Σ	0..*	Identifier	Business Identifier for observation Slice: Unordered, Open by value:system
identifier:conditionalCreate	Σ	0..1	Identifier	Unique identifier of this measurement for a given patient and device
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
use	?!Σ	0..1	code	usual | official | temp | secondary | old (If known) Binding: IdentifierUse (required): Identifies the purpose for this identifier, if known .
system	Σ	1..1	uri	The namespace for the identifier value Fixed Value: http://hl7.org/fhir/uv/phd/StructureDefinition/PhdBaseObservation
value	Σ	1..1	string	The value that is unique Example General: 123456
period	Σ	0..1	Period	Time period when id is/was valid for use
assigner	Σ	0..1	Reference(Organization)	Organization that issued id (may be just text)
basedOn	Σ	0..*	Reference(CarePlan | DeviceRequest | ImmunizationRecommendation | MedicationRequest | NutritionOrder | ServiceRequest)	Fulfills plan, proposal or order
partOf	Σ	0..*	Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy)	Part of referenced event
status	?!Σ	1..1	code	registered | preliminary | final | amended + Binding: ObservationStatus (required): Codes providing the status of an observation.
Slices for category		1..*	CodeableConcept	Classification of type of observation Slice: Unordered, Open by value:coding.code, value:coding.system Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.
category:PHD-Observation		1..1	CodeableConcept	Classification of type of observation Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
coding	Σ	1..*	Coding	Code defined by a terminology system
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
system	Σ	1..1	uri	Identity of the terminology system Fixed Value: http://hl7.org/fhir/uv/phd/CodeSystem/PhdObservationCategories
version	Σ	0..1	string	Version of the system - if relevant
code	Σ	1..1	code	Symbol in syntax defined by the system Fixed Value: phd
display	Σ	0..1	string	Representation defined by the system
userSelected	Σ	0..1	boolean	If this coding was chosen directly by the user
text	Σ	0..1	string	Plain text representation of the concept
code	ΣC	1..1	CodeableConcept	Type of observation (code / type) Binding: MDC Non-Object codes (extensible) Constraints: mdc-1
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
coding	Σ	0..*	Coding	Code defined by a terminology system
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
system	Σ	0..1	uri	Identity of the terminology system
version	Σ	0..1	string	Version of the system - if relevant
code	Σ	0..1	code	Symbol in syntax defined by the system
display	Σ	0..1	string	Representation defined by the system
userSelected	Σ	0..1	boolean	If this coding was chosen directly by the user
text	Σ	0..1	string	Plain text representation of the concept
subject	Σ	1..1	Reference(Patient | PhdDevice)	Reference to the patient or the PhdDevice that is the subject of the observation
focus	Σ	0..*	Reference(Resource)	What the observation is about, when it is not about the subject of record
encounter	Σ	0..1	Reference(Encounter)	Healthcare event during which this observation is made
Slices for effective[x]	Σ	1..1		Clinically relevant time/time-period for observation Slice: Unordered, Closed by type:$this
effectiveDateTime			dateTime
effectivePeriod			Period
effective[x]:effectiveDateTime	Σ	0..1	dateTime	Clinically relevant time/time-period for observation
effective[x]:effectivePeriod	Σ	0..1	Period	Clinically relevant time/time-period for observation
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
start	ΣC	0..1	dateTime	Starting time with inclusive boundary
end	ΣC	0..1	dateTime	End time with inclusive boundary, if not ongoing
issued	Σ	0..1	instant	Date/Time this version was made available
performer	Σ	0..*	Reference(Practitioner | PractitionerRole | Organization | CareTeam | Patient | RelatedPerson)	Who is responsible for the observation
value[x]	ΣC	0..1	SampledData	Actual result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
origin	Σ	1..1	SimpleQuantity	Zero value and units
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
value	Σ	1..1	decimal	Intercept value (with implicit precision)
unit	Σ	0..1	string	Unit representation
system	ΣC	1..1	uri	The UCUM coding system Fixed Value: http://unitsofmeasure.org
code	Σ	1..1	code	Coded form of the unit
period	Σ	1..1	decimal	Number of milliseconds between samples
factor	Σ	1..1	decimal	The scale factor
lowerLimit	Σ	0..1	decimal	The scaled lower limit of the ACOM sample array when provided by the PHD device.
upperLimit	Σ	0..1	decimal	The scaled upper limit of the ACOM sample array when provided by the PHD device.
dimensions	Σ	1..1	positiveInt	Number of sample points at each time point
data		0..1	string	Decimal values with spaces, or "E" | "U" | "L"
dataAbsentReason	C	0..1	CodeableConcept	This element is populated when the Measurement Status indicates invalid, not available or measurement-ongoing. Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
coding	Σ	0..*	Coding	Code defined by a terminology system Binding: DataAbsentReason (required)
text	Σ	0..1	string	Plain text representation of the concept
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
Slices for coding	Σ	1..*	Coding	Code defined by a terminology system Slice: Unordered, Open by value:system
coding:MsmtStatusInterpretation	Σ	1..1	Coding	Measurement status interpretation when questionable, calibration-ongoing, validated, early-indication, threshold exceeded, alarm inhibited
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
system	Σ	1..1	uri	Identity of the terminology system Fixed Value: http://hl7.org/fhir/uv/pocd/CodeSystem/measurement-status
version	Σ	0..1	string	Version of the system - if relevant
code	Σ	1..1	code	Symbol in syntax defined by the system
display	Σ	0..1	string	Representation defined by the system
userSelected	Σ	0..1	boolean	If this coding was chosen directly by the user
text	Σ	0..1	string	Plain text representation of the concept
note		0..*	Annotation	Comments about the observation
bodySite		0..1	CodeableConcept	Observed body part Binding: SNOMEDCTBodyStructures (example): Codes describing anatomical locations. May include laterality.
method		0..1	CodeableConcept	How it was done Binding: ObservationMethods (example): Methods for simple observations.
specimen		0..1	Reference(Specimen)	Specimen used for this observation
device		1..1	Reference(PhdDevice)	(Measurement) Device
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
reference	ΣC	1..1	string	Reference to the device responsible for the measurement
type	Σ	0..1	uri	Type the reference refers to (e.g. "Patient") Binding: ResourceType (extensible): Aa resource (or, for logical models, the URI of the logical model).
identifier	Σ	0..1	Identifier	Logical reference, when literal reference is not known
display	Σ	0..1	string	Text alternative for the resource
referenceRange	C	0..*	BackboneElement	Provides guide for interpretation Constraints: obs-3
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
low	C	0..1	SimpleQuantity	Low Range, if relevant
high	C	0..1	SimpleQuantity	High Range, if relevant
type		0..1	CodeableConcept	Reference range qualifier Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.
appliesTo		0..*	CodeableConcept	Reference range population Binding: ObservationReferenceRangeAppliesToCodes (example): Codes identifying the population the reference range applies to.
age		0..1	Range	Applicable age range, if relevant
text		0..1	string	Text based reference range in an observation
hasMember	Σ	0..*	Reference(PhdBaseObservation)	Other PHD Observations that are part of this group observation.
derivedFrom	Σ	0..*	Reference(PhdBaseObservation)	A source the measurement data is derived from.
Slices for component	Σ	0..*	BackboneElement	Component results Slice: Unordered, Open by value:code
component:All Slices				Content/Rules for all slices
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.
value[x]	Σ	0..1		Actual component result
valueQuantity			Quantity
valueCodeableConcept			CodeableConcept
valueString			string
valueBoolean			boolean
valueInteger			integer
valueRange			Range
valueRatio			Ratio
valueSampledData			SampledData
valueTime			time
valueDateTime			dateTime
valuePeriod			Period
dataAbsentReason	C	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
component:supplementalTypesComponent	Σ	0..*	BackboneElement	Supplemental Type: A further description of the measurement type.
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: At least the following
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
coding		1..*	Coding	Code defined by a terminology system Fixed Value: (Complex)
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations
system		1..1	uri	Identity of the terminology system Fixed Value: urn:iso:std:iso:11073:10101
version		0..1	string	Version of the system - if relevant
code		1..1	code	Symbol in syntax defined by the system Fixed Value: 68193
display		0..1	string	Representation defined by the system
userSelected		0..1	boolean	If this coding was chosen directly by the user
text		0..1	string	Plain text representation of the concept
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
coding	Σ	1..*	Coding	Code defined by a terminology system
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
system	Σ	1..1	uri	Identity of the terminology system Fixed Value: urn:iso:std:iso:11073:10101
version	Σ	0..1	string	Version of the system - if relevant
code	Σ	1..1	code	Symbol in syntax defined by the system Fixed Value: 68193
display	Σ	0..1	string	Representation defined by the system
userSelected	Σ	0..1	boolean	If this coding was chosen directly by the user
text	Σ	0..1	string	Plain text representation of the concept
value[x]	Σ	0..1	CodeableConcept	Actual component result
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
coding	Σ	0..*	Coding	Code defined by a terminology system
id		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
system	Σ	1..1	uri	Identity of the terminology system Fixed Value: urn:iso:std:iso:11073:10101
version	Σ	0..1	string	Version of the system - if relevant
code	Σ	1..1	code	Symbol in syntax defined by the system
display	Σ	0..1	string	Representation defined by the system
userSelected	Σ	0..1	boolean	If this coding was chosen directly by the user
text	Σ	0..1	string	Plain text representation of the concept
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
Documentation for this format

Terminology Bindings

Path	Conformance	ValueSet / Code	URI
Observation.meta.security	extensible	All Security Labels http://hl7.org/fhir/ValueSet/security-labels From the FHIR Standard
Observation.meta.security:PhdHtest	extensible	Fixed Value: HTEST http://hl7.org/fhir/ValueSet/security-labels From the FHIR Standard
Observation.meta.tag	example	CommonTags http://hl7.org/fhir/ValueSet/common-tags From the FHIR Standard
Observation.language	preferred	CommonLanguages http://hl7.org/fhir/ValueSet/languages From the FHIR Standard Additional Bindings Purpose AllLanguages Max Binding
Observation.identifier:conditionalCreate.use	required	IdentifierUse http://hl7.org/fhir/ValueSet/identifier-use|4.0.1 From the FHIR Standard
Observation.status	required	ObservationStatus http://hl7.org/fhir/ValueSet/observation-status|4.0.1 From the FHIR Standard
Observation.category	preferred	ObservationCategoryCodes http://hl7.org/fhir/ValueSet/observation-category From the FHIR Standard
Observation.category:PHD-Observation	preferred	ObservationCategoryCodes http://hl7.org/fhir/ValueSet/observation-category From the FHIR Standard
Observation.code	extensible	MDCnotObject http://hl7.org/fhir/uv/phd/ValueSet/MDCnotObject From this IG
Observation.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason From the FHIR Standard
Observation.dataAbsentReason.coding	required	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason From the FHIR Standard
Observation.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation From the FHIR Standard
Observation.bodySite	example	SNOMEDCTBodyStructures http://hl7.org/fhir/ValueSet/body-site From the FHIR Standard
Observation.method	example	ObservationMethods http://hl7.org/fhir/ValueSet/observation-methods From the FHIR Standard
Observation.device.type	extensible	ResourceType http://hl7.org/fhir/ValueSet/resource-types From the FHIR Standard
Observation.referenceRange.type	preferred	ObservationReferenceRangeMeaningCodes http://hl7.org/fhir/ValueSet/referencerange-meaning From the FHIR Standard
Observation.referenceRange.appliesTo	example	ObservationReferenceRangeAppliesToCodes http://hl7.org/fhir/ValueSet/referencerange-appliesto From the FHIR Standard
Observation.component.code	example	LOINCCodes(a valid code from LOINC) http://hl7.org/fhir/ValueSet/observation-codes From the FHIR Standard
Observation.component.dataAbsentReason	extensible	DataAbsentReason http://hl7.org/fhir/ValueSet/data-absent-reason From the FHIR Standard
Observation.component.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation From the FHIR Standard
Observation.component:supplementalTypesComponent.code	example	Pattern Value: 68193 http://hl7.org/fhir/ValueSet/observation-codes From the FHIR Standard
Observation.component:supplementalTypesComponent.interpretation	extensible	ObservationInterpretationCodes http://hl7.org/fhir/ValueSet/observation-interpretation From the FHIR Standard

Constraints

Id	Grade	Path(s)	Details	Requirements
dom-2	error	Observation	If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty()
dom-3	error	Observation	If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4	error	Observation	If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5	error	Observation	If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty()
dom-6	best practice	Observation	A resource should have narrative for robust management : text.`div`.exists()
ele-1	error	**ALL** elements	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	**ALL** extensions	Must have either extensions or value[x], not both : extension.exists() != value.exists()
mdc-1	warning	Observation.code	A published MDC Code is preferred but private MDC codes are allowed as well. : coding.exists() and coding.where(system = 'urn:iso:std:iso:11073:10101').exists()
obs-3	error	Observation.referenceRange	Must have at least a low or a high or text : low.exists() or high.exists() or text.exists()
obs-6	error	Observation	dataAbsentReason SHALL only be present if Observation.value[x] is not present : dataAbsentReason.empty() or value.empty()
obs-7	error	Observation	If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present : value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()

This structure is derived from PhdBaseObservation

Summary

Mandatory: 0 element(4 nested mandatory elements)
Fixed: 1 element

Maturity: 1