PACIO Personal Functioning and Engagement Implementation Guide
3.0.0-ballot - STU 3 Ballot United States of America flag

PACIO Personal Functioning and Engagement Implementation Guide, published by HL7 International / Patient Care. This guide is not an authorized publication; it is the continuous build for version 3.0.0-ballot built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7/fhir-pacio-pfe/ and changes regularly. See the Directory of published versions

Resource Profile: Personal Functioning and Engagement Nutrition Intake Profile - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 3

Definitions for the pfe-nutrition-intake resource profile

See the documentation on how to interpret the contents of this table

0. Basic
Definition

Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

ShortResource for non-supported content
Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesZ-resource, Extension-resource, Custom-resource
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Basic.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Basic.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHALL be taken from The codes SHOULD be taken from AllLanguageshttp://hl7.org/fhir/ValueSet/languages|4.0.1
(required to http://hl7.org/fhir/ValueSet/all-languages)
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Basic.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control10..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
8. Basic.extension:instantiatesCanonical
Slice NameinstantiatesCanonical
Definition

R5: NutritionIntake.instantiatesCanonical (new:canonical(ActivityDefinition,ChargeItemDefinition,ClinicalUseDefinition,EventDefinition,Measure,MessageDefinition,ObservationDefinition,OperationDefinition,PlanDefinition,Questionnaire,Requirements,SubscriptionTopic,TestPlan,TestScript))

ShortR5: Instantiates FHIR protocol or definition (new)
Comments

Element NutritionIntake.instantiatesCanonical is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.instantiatesCanonical has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Instantiates FHIR protocol or definition (new)) (Extension Type: canonical(Cross-version Profile for R5.ActivityDefinition for use in FHIR R4, ActivityDefinition, Cross-version Profile for R5.ChargeItemDefinition for use in FHIR R4, ChargeItemDefinition, Cross-version Profile for R5.ClinicalUseDefinition for use in FHIR R4, Basic, Cross-version Profile for R5.EventDefinition for use in FHIR R4, EventDefinition, Cross-version Profile for R5.Measure for use in FHIR R4, Measure, Cross-version Profile for R5.MessageDefinition for use in FHIR R4, MessageDefinition, Cross-version Profile for R5.ObservationDefinition for use in FHIR R4, ObservationDefinition, Cross-version Profile for R5.OperationDefinition for use in FHIR R4, OperationDefinition, Cross-version Profile for R5.PlanDefinition for use in FHIR R4, PlanDefinition, Cross-version Profile for R5.Questionnaire for use in FHIR R4, Questionnaire, Cross-version Profile for R5.Requirements for use in FHIR R4, Basic, Cross-version Profile for R5.SubscriptionTopic for use in FHIR R4, Basic, Cross-version Profile for R5.TestPlan for use in FHIR R4, Basic, Cross-version Profile for R5.TestScript for use in FHIR R4, TestScript))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. Basic.extension:instantiatesUri
Slice NameinstantiatesUri
Definition

R5: NutritionIntake.instantiatesUri (new:uri)

ShortR5: Instantiates external protocol or definition (new)
Comments

Element NutritionIntake.instantiatesUri is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.instantiatesUri has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Instantiates external protocol or definition (new)) (Extension Type: uri)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Basic.extension:basedOn
Slice NamebasedOn
Definition

R5: NutritionIntake.basedOn (new:Reference(NutritionOrder,CarePlan,ServiceRequest))

ShortR5: Fulfils plan, proposal or order (new)
Comments

Element NutritionIntake.basedOn is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.basedOn has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

The order (e.g., nutrition order, service request) or plan (e.g., care plan) that the intake derives from.

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Fulfils plan, proposal or order (new)) (Extension Type: Reference(Cross-version Profile for R5.NutritionOrder for use in FHIR R4, NutritionOrder, Cross-version Profile for R5.CarePlan for use in FHIR R4, CarePlan, Cross-version Profile for R5.ServiceRequest for use in FHIR R4, ServiceRequest))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Basic.extension:basedOn.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
16. Basic.extension:basedOn.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.basedOn"
}
<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.basedOn"/>
18. Basic.extension:basedOn.value[x]
Definition

A plan, proposal or order that is fulfilled in whole or in part by this event.


Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortFulfils plan, proposal or orderValue of extension
Control0..1
TypeReference(Personal Functioning and Engagement Nutrition Order Profile, Cross-version Profile for R5.CarePlan for use in FHIR R4, CarePlan, Cross-version Profile for R5.ServiceRequest for use in FHIR R4, ServiceRequest), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Basic.extension:partOf
Slice NamepartOf
Definition

R5: NutritionIntake.partOf (new:Reference(NutritionIntake,Procedure,Observation))

ShortR5: Part of referenced event (new)
Comments

Element NutritionIntake.partOf is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.partOf has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

The event (e.g., procedure, observation) during which the intake occurred or is related to

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Part of referenced event (new)) (Extension Type: Reference(Cross-version Profile for R5.NutritionIntake for use in FHIR R4, Basic, Cross-version Profile for R5.Procedure for use in FHIR R4, Procedure, Cross-version Profile for R5.Observation for use in FHIR R4, Observation))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. Basic.extension:partOf.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
24. Basic.extension:partOf.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.partOf"
}
<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.partOf"/>
26. Basic.extension:partOf.value[x]
Definition

A larger event of which this particular event is a component or step.


Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortPart of referenced eventValue of extension
Control0..1
TypeReference(Personal Functioning and Engagement Nutrition Intake Profile, Cross-version Profile for R5.Procedure for use in FHIR R4, Procedure, Cross-version Profile for R5.Observation for use in FHIR R4, Observation), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Basic.extension:statusReason
Slice NamestatusReason
Definition

R5: NutritionIntake.statusReason (new:CodeableConcept)

ShortR5: Reason for current status (new)
Comments

Element NutritionIntake.statusReason is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.statusReason has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). This is generally only used for "exception" statuses such as "not-taken", "on-hold", "cancelled" or "entered-in-error". The reason for performing the event at all is captured in reasonCode, not here.

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Reason for current status (new)) (Extension Type: CodeableConcept)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
30. Basic.extension:statusReason.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
32. Basic.extension:statusReason.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.statusReason"
}
<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.statusReason"/>
34. Basic.extension:statusReason.value[x]
Definition

Captures the reason for the current state of the NutritionIntake.


Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortReason for current statusValue of extension
Comments

This is generally only used for "exception" statuses such as "not-taken", "on-hold", "cancelled" or "entered-in-error". The reason for performing the event at all is captured in reasonCode, not here.

Control0..1
BindingFor example codes, see For codes, see PFE ClinicalImpression Status Reason
(example to http://hl7.org/fhir/us/pacio-pfe/ValueSet/pfe-clinicalimpression-status-reason)
TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Basic.extension:code
Slice Namecode
Definition

R5: NutritionIntake.code (new:CodeableConcept)

ShortR5: Code representing an overall type of nutrition intake (new)
Comments

Element NutritionIntake.code is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.code has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(R5: Code representing an overall type of nutrition intake (new)) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
38. Basic.extension:code.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
40. Basic.extension:code.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.code"
}
<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.code"/>
42. Basic.extension:code.value[x]
Definition

Overall type of nutrition intake.


Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortCode representing an overall type of nutrition intakeValue of extension
Control0..1
BindingFor example codes, see For codes, see DietCodes
(example to http://hl7.org/fhir/ValueSet/diet-type)
TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Basic.extension:encounter
Slice Nameencounter
Definition

R5: NutritionIntake.encounter (new:Reference(Encounter))

ShortR5: Encounter associated with NutritionIntake (new)
Comments

Element NutritionIntake.encounter is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.encounter has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(R5: Encounter associated with NutritionIntake (new)) (Extension Type: Reference(Cross-version Profile for R5.Encounter for use in FHIR R4, Encounter))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. Basic.extension:occurrence
Slice Nameoccurrence
Definition

R5: NutritionIntake.occurrence[x] (new:dateTime, Period)

ShortR5: The date/time or interval when the food or fluid is/was consumed (new)
Comments

Element NutritionIntake.occurrence[x] is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.occurrence[x] has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). This attribute reflects the period over which the patient consumed the food fluid and is expected to be populated on the majority of NutritionIntake. If the food or fluid is still being taken and is expected to continue indefinitely at the time the usage is recorded, the "end" date will be omitted. If the end date is known, then it is included as the "end date". The date/time attribute supports a variety of dates - year, year/month and exact date. If something more than this is required, this should be conveyed as text.

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(R5: The date/time or interval when the food or fluid is/was consumed (new)) (Extension Type: Choice of: dateTime, Period)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
48. Basic.extension:recorded
Slice Namerecorded
Definition

R5: NutritionIntake.recorded (new:dateTime)

ShortR5: When the intake was recorded (new)
Comments

Element NutritionIntake.recorded is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.recorded has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(R5: When the intake was recorded (new)) (Extension Type: dateTime)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
50. Basic.extension:reported
Slice Namereported
Definition

R5: NutritionIntake.reported[x] (new:boolean, Reference(Patient,RelatedPerson,Practitioner,PractitionerRole,Organization))

ShortR5: Person or organization that provided the information about the consumption of this food or fluid (new)
Comments

Element NutritionIntake.reported[x] is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.reported[x] has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(R5: Person or organization that provided the information about the consumption of this food or fluid (new)) (Extension Type: Choice of: boolean, Reference(Cross-version Profile for R5.Patient for use in FHIR R4, Patient, Cross-version Profile for R5.RelatedPerson for use in FHIR R4, RelatedPerson, Cross-version Profile for R5.Practitioner for use in FHIR R4, Practitioner, Cross-version Profile for R5.PractitionerRole for use in FHIR R4, PractitionerRole, Cross-version Profile for R5.Organization for use in FHIR R4, Organization))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
52. Basic.extension:consumedItem
Slice NameconsumedItem
Definition

R5: NutritionIntake.consumedItem (new:BackboneElement)

ShortR5: What food or fluid product or item was consumed (new)
Comments

Element NutritionIntake.consumedItem is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control1..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: What food or fluid product or item was consumed (new)) (Complex Extension)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
54. Basic.extension:consumedItem.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control20..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
56. Basic.extension:consumedItem.extension:type
Slice Nametype
Definition

R5: NutritionIntake.consumedItem.type (new:CodeableConcept)

ShortThe type of food (i.e. solid or liquid) product or item that was consumedAdditional content defined by implementations
Comments

Element NutritionIntake.consumedItem.type is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.type is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.type has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control10..1*
TypeExtension
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Element NutritionIntake.consumedItem.type is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.type is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.type has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
58. Basic.extension:consumedItem.extension:type.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
60. Basic.extension:consumedItem.extension:type.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "type"
}
<url value="type"/>
62. Basic.extension:consumedItem.extension:type.value[x]
Definition

Indicates what a category of item that was consumed: e.g., food, fluid, enteral, etc.


Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortThe type of food or fluid productValue of extension
Control10..1
BindingFor example codes, see For codes, see Types of Edible Substances
(example to http://terminology.hl7.org/ValueSet/edible-substance-type)
TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. Basic.extension:consumedItem.extension:nutritionProduct
Slice NamenutritionProduct
Definition

Identifies the food (i.e. solid and/or liquid) product that is to be consumed. This is potentially a link to a resource representing the details of the food product or a simple attribute carrying a code that identifies the food from a known list of foods.

ShortA product used for nutritional purposes (e.g. food or supplement)Additional content defined by implementations
Comments

Element NutritionIntake.consumedItem.nutritionProduct is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.nutritionProduct is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.nutritionProduct has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of a new nutritionProduct resource is recommended.

Control10..1*
TypeExtension
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Element NutritionIntake.consumedItem.nutritionProduct is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.nutritionProduct is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.nutritionProduct has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
66. Basic.extension:consumedItem.extension:nutritionProduct.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control10..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
68. Basic.extension:consumedItem.extension:nutritionProduct.extension:_datatype
Slice Name_datatype
Definition

Slice to indicate the presence of a R5 CodeableReference in FHIR R4

ShortDataType slice for a FHIR R5 `CodeableReference` valueAdditional content defined by implementations
Control10..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
70. Basic.extension:consumedItem.extension:nutritionProduct.extension:_datatype.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/StructureDefinition/_datatype"
}
<url value="http://hl7.org/fhir/StructureDefinition/_datatype"/>
72. Basic.extension:consumedItem.extension:nutritionProduct.extension:_datatype.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Comments

Must be: CodeableReference

Control10..1
Typestring, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Fixed Value
{
  "valueString" : "CodeableReference"
}
<valueString value="CodeableReference"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Basic.extension:consumedItem.extension:nutritionProduct.extension:concept
Slice Nameconcept
Definition

R5: CodeableReference.concept

ShortR5: Reference to a concept (by class)Additional content defined by implementations
Comments

Element CodeableReference.concept is mapped to FHIR R4 element CodeableConcept as Equivalent.

Control0..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element CodeableReference.concept is mapped to FHIR R4 element CodeableConcept as Equivalent.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
76. Basic.extension:consumedItem.extension:nutritionProduct.extension:concept.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
78. Basic.extension:consumedItem.extension:nutritionProduct.extension:concept.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "concept"
}
<url value="concept"/>
80. Basic.extension:consumedItem.extension:nutritionProduct.extension:concept.value[x]
Definition

A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology.


Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortReference to a concept (by class)Value of extension
Control0..1
BindingFor example codes, see For codes, see FoodTypeCodes
(example to http://hl7.org/fhir/ValueSet/food-type)
TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
82. Basic.extension:consumedItem.extension:nutritionProduct.extension:reference
Slice Namereference
Definition

R5: CodeableReference.reference

ShortR5: Reference to a resource (by instance)Additional content defined by implementations
Comments

Element CodeableReference.reference is mapped to FHIR R4 element Reference as Equivalent.

Control0..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element CodeableReference.reference is mapped to FHIR R4 element Reference as Equivalent.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
84. Basic.extension:consumedItem.extension:nutritionProduct.extension:reference.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
86. Basic.extension:consumedItem.extension:nutritionProduct.extension:reference.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "reference"
}
<url value="reference"/>
88. Basic.extension:consumedItem.extension:nutritionProduct.extension:reference.value[x]
Definition

A reference to a resource the provides exact details about the information being referenced.


Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortReference to a resource (by instance)Value of extension
Control0..1
TypeReference(Personal Functioning and Engagement Nutrition Product Profile), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. Basic.extension:consumedItem.extension:nutritionProduct.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "nutritionProduct"
}
<url value="nutritionProduct"/>
92. Basic.extension:consumedItem.extension:nutritionProduct.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..01
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. Basic.extension:consumedItem.extension:schedule
Slice Nameschedule
Definition

R5: NutritionIntake.consumedItem.schedule (new:Timing)

ShortR5: Scheduled frequency of consumption (new)Additional content defined by implementations
Comments

Element NutritionIntake.consumedItem.schedule is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.schedule is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.schedule has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element NutritionIntake.consumedItem.schedule is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.schedule is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.schedule has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
96. Basic.extension:consumedItem.extension:schedule.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "schedule"
}
<url value="schedule"/>
98. Basic.extension:consumedItem.extension:amount
Slice Nameamount
Definition

R5: NutritionIntake.consumedItem.amount (new:Quantity[SimpleQuantity])

ShortQuantity of the specified food (i.e. solid and/or liquid).Additional content defined by implementations
Comments

Element NutritionIntake.consumedItem.amount is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.amount is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.amount has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1*
TypeExtension
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Element NutritionIntake.consumedItem.amount is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.amount is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.amount has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
100. Basic.extension:consumedItem.extension:amount.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "amount"
}
<url value="amount"/>
102. Basic.extension:consumedItem.extension:rate
Slice Namerate
Definition

R5: NutritionIntake.consumedItem.rate (new:Quantity[SimpleQuantity])

ShortRate of enteral feeding administration.Additional content defined by implementations
Comments

Element NutritionIntake.consumedItem.rate is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.rate is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.rate has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1*
TypeExtension
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Element NutritionIntake.consumedItem.rate is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.rate is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.rate has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
104. Basic.extension:consumedItem.extension:rate.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "rate"
}
<url value="rate"/>
106. Basic.extension:consumedItem.extension:notConsumed
Slice NamenotConsumed
Definition

R5: NutritionIntake.consumedItem.notConsumed (new:boolean)

ShortR5: Flag to indicate if the food or fluid item was refused or otherwise not consumed (new)Additional content defined by implementations
Comments

Element NutritionIntake.consumedItem.notConsumed is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.notConsumed is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.notConsumed has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element NutritionIntake.consumedItem.notConsumed is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.notConsumed is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.notConsumed has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
108. Basic.extension:consumedItem.extension:notConsumed.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "notConsumed"
}
<url value="notConsumed"/>
110. Basic.extension:consumedItem.extension:notConsumedReason
Slice NamenotConsumedReason
Definition

R5: NutritionIntake.consumedItem.notConsumedReason (new:CodeableConcept)

ShortR5: Reason food or fluid was not consumed (new)Additional content defined by implementations
Comments

Element NutritionIntake.consumedItem.notConsumedReason is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.notConsumedReason is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.notConsumedReason has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element NutritionIntake.consumedItem.notConsumedReason is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.notConsumedReason is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.notConsumedReason has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
112. Basic.extension:consumedItem.extension:notConsumedReason.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
114. Basic.extension:consumedItem.extension:notConsumedReason.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "notConsumedReason"
}
<url value="notConsumedReason"/>
116. Basic.extension:consumedItem.extension:notConsumedReason.value[x]
Definition

Document the reason the food or fluid was not consumed, such as refused, held, etc.


Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortReason food or fluid was not consumedValue of extension
Control0..1
BindingFor example codes, see For codes, see PFE Reasons for why a food item was not consumed
(example to http://hl7.org/fhir/us/pacio-pfe/ValueSet/pfe-not-consumed-reason)
TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
118. Basic.extension:consumedItem.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.consumedItem"
}
<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.consumedItem"/>
120. Basic.extension:consumedItem.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..01
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
122. Basic.extension:ingredientLabel
Slice NameingredientLabel
Definition

R5: NutritionIntake.ingredientLabel (new:BackboneElement)

ShortR5: Total nutrient for the whole meal, product, serving (new)
Comments

Element NutritionIntake.ingredientLabel is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.ingredientLabel has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Individual item nutrients are not currently included in the resource and will likely end up as a reference in nutritionProduct to represent the individual items.

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Total nutrient for the whole meal, product, serving (new)) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
124. Basic.extension:ingredientLabel.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control20..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
126. Basic.extension:ingredientLabel.extension:nutrient
Slice Namenutrient
Definition

R5: NutritionIntake.ingredientLabel.nutrient (new:CodeableReference(Substance))

ShortR5: Total nutrient consumed (new)Additional content defined by implementations
Comments

Element NutritionIntake.ingredientLabel.nutrient is part of an existing definition because parent element NutritionIntake.ingredientLabel requires a cross-version extension. Element NutritionIntake.ingredientLabel.nutrient is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.ingredientLabel.nutrient has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control10..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element NutritionIntake.ingredientLabel.nutrient is part of an existing definition because parent element NutritionIntake.ingredientLabel requires a cross-version extension. Element NutritionIntake.ingredientLabel.nutrient is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.ingredientLabel.nutrient has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
128. Basic.extension:ingredientLabel.extension:nutrient.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control10..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
130. Basic.extension:ingredientLabel.extension:nutrient.extension:_datatype
Slice Name_datatype
Definition

Slice to indicate the presence of a R5 CodeableReference in FHIR R4

ShortDataType slice for a FHIR R5 `CodeableReference` valueAdditional content defined by implementations
Control10..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
132. Basic.extension:ingredientLabel.extension:nutrient.extension:_datatype.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/StructureDefinition/_datatype"
}
<url value="http://hl7.org/fhir/StructureDefinition/_datatype"/>
134. Basic.extension:ingredientLabel.extension:nutrient.extension:_datatype.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Comments

Must be: CodeableReference

Control10..1
Typestring, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Fixed Value
{
  "valueString" : "CodeableReference"
}
<valueString value="CodeableReference"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
136. Basic.extension:ingredientLabel.extension:nutrient.extension:concept
Slice Nameconcept
Definition

R5: CodeableReference.concept

ShortR5: Reference to a concept (by class)Additional content defined by implementations
Comments

Element CodeableReference.concept is mapped to FHIR R4 element CodeableConcept as Equivalent.

Control0..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element CodeableReference.concept is mapped to FHIR R4 element CodeableConcept as Equivalent.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
138. Basic.extension:ingredientLabel.extension:nutrient.extension:concept.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
140. Basic.extension:ingredientLabel.extension:nutrient.extension:concept.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "concept"
}
<url value="concept"/>
142. Basic.extension:ingredientLabel.extension:nutrient.extension:concept.value[x]
Definition

A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology.


Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortReference to a concept (by class)Value of extension
Control0..1
BindingFor example codes, see For codes, see NutrientModifierCodes
(example to http://hl7.org/fhir/ValueSet/nutrient-code)
TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
144. Basic.extension:ingredientLabel.extension:nutrient.extension:reference
Slice Namereference
Definition

R5: CodeableReference.reference

ShortR5: Reference to a resource (by instance)Additional content defined by implementations
Comments

Element CodeableReference.reference is mapped to FHIR R4 element Reference as Equivalent.

Control0..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element CodeableReference.reference is mapped to FHIR R4 element Reference as Equivalent.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
146. Basic.extension:ingredientLabel.extension:nutrient.extension:reference.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "reference"
}
<url value="reference"/>
148. Basic.extension:ingredientLabel.extension:nutrient.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "nutrient"
}
<url value="nutrient"/>
150. Basic.extension:ingredientLabel.extension:nutrient.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..01
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
152. Basic.extension:ingredientLabel.extension:amount
Slice Nameamount
Definition

R5: NutritionIntake.ingredientLabel.amount (new:Quantity[SimpleQuantity])

ShortR5: Total amount of nutrient consumed (new)Additional content defined by implementations
Comments

Element NutritionIntake.ingredientLabel.amount is part of an existing definition because parent element NutritionIntake.ingredientLabel requires a cross-version extension. Element NutritionIntake.ingredientLabel.amount is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.ingredientLabel.amount has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control10..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element NutritionIntake.ingredientLabel.amount is part of an existing definition because parent element NutritionIntake.ingredientLabel requires a cross-version extension. Element NutritionIntake.ingredientLabel.amount is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.ingredientLabel.amount has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
154. Basic.extension:ingredientLabel.extension:amount.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "amount"
}
<url value="amount"/>
156. Basic.extension:ingredientLabel.extension:amount.value[x]
Definition

Total amount of nutrient consumed.


Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortTotal amount of nutrient consumedValue of extension
Control10..1
TypeQuantity(SimpleQuantity), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
sqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
158. Basic.extension:ingredientLabel.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.ingredientLabel"
}
<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.ingredientLabel"/>
160. Basic.extension:ingredientLabel.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..01
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
162. Basic.extension:performer
Slice Nameperformer
Definition

R5: NutritionIntake.performer (new:BackboneElement)

ShortR5: Who was performed in the intake (new)
Comments

Element NutritionIntake.performer is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.performer has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Who was performed in the intake (new)) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
164. Basic.extension:performer.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control10..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
166. Basic.extension:performer.extension:function
Slice Namefunction
Definition

R5: NutritionIntake.performer.function (new:CodeableConcept)

ShortR5: Type of performer (new)Additional content defined by implementations
Comments

Element NutritionIntake.performer.function is part of an existing definition because parent element NutritionIntake.performer requires a cross-version extension. Element NutritionIntake.performer.function is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.performer.function has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element NutritionIntake.performer.function is part of an existing definition because parent element NutritionIntake.performer requires a cross-version extension. Element NutritionIntake.performer.function is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.performer.function has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
168. Basic.extension:performer.extension:function.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
170. Basic.extension:performer.extension:function.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "function"
}
<url value="function"/>
172. Basic.extension:performer.extension:function.value[x]
Definition

Type of performer.


Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortType of performerValue of extension
Control0..1
BindingFor example codes, see For codes, see ProcedurePerformerRoleCodes
(example to http://hl7.org/fhir/ValueSet/performer-role)
TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
174. Basic.extension:performer.extension:actor
Slice Nameactor
Definition

R5: NutritionIntake.performer.actor (new:Reference(Practitioner,PractitionerRole,Organization,CareTeam,Patient,Device,RelatedPerson))

ShortR5: Who performed the intake (new)Additional content defined by implementations
Comments

Element NutritionIntake.performer.actor is part of an existing definition because parent element NutritionIntake.performer requires a cross-version extension. Element NutritionIntake.performer.actor is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.performer.actor has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control10..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element NutritionIntake.performer.actor is part of an existing definition because parent element NutritionIntake.performer requires a cross-version extension. Element NutritionIntake.performer.actor is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.performer.actor has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
176. Basic.extension:performer.extension:actor.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "actor"
}
<url value="actor"/>
178. Basic.extension:performer.extension:actor.value[x]
Definition

Who performed the intake.


Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortWho performed the intakeValue of extension
Control10..1
TypeReference(Cross-version Profile for R5.Practitioner for use in FHIR R4, Practitioner, Cross-version Profile for R5.PractitionerRole for use in FHIR R4, PractitionerRole, Cross-version Profile for R5.Organization for use in FHIR R4, Organization, Cross-version Profile for R5.CareTeam for use in FHIR R4, CareTeam, Cross-version Profile for R5.Patient for use in FHIR R4, Patient, Cross-version Profile for R5.Device for use in FHIR R4, Device, Cross-version Profile for R5.RelatedPerson for use in FHIR R4, RelatedPerson), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
180. Basic.extension:performer.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.performer"
}
<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.performer"/>
182. Basic.extension:performer.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..01
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
184. Basic.extension:location
Slice Namelocation
Definition

R5: NutritionIntake.location (new:Reference(Location))

ShortR5: Where the intake occurred (new)
Comments

Element NutritionIntake.location is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.location has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(R5: Where the intake occurred (new)) (Extension Type: Reference(Cross-version Profile for R5.Location for use in FHIR R4, Location))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
186. Basic.extension:derivedFrom
Slice NamederivedFrom
Definition

R5: NutritionIntake.derivedFrom (new:Reference(Resource))

ShortR5: Additional supporting information (new)
Comments

Element NutritionIntake.derivedFrom is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.derivedFrom has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Likely references would be to AllergyIntolerance, Observation or QuestionnaireAnswers.

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Additional supporting information (new)) (Extension Type: Reference(Cross-version Profile for R5.Resource for use in FHIR R4, Resource))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
188. Basic.extension:reason
Slice Namereason
Definition

R5: NutritionIntake.reason (new:CodeableReference(Condition,Observation,DiagnosticReport,DocumentReference))

ShortR5: Reason for why the food or fluid is /was consumed (new)
Comments

Element NutritionIntake.reason is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.reason has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Reason for why the food or fluid is /was consumed (new)) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
190. Basic.extension:reason.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control10..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
192. Basic.extension:reason.extension:_datatype
Slice Name_datatype
Definition

Slice to indicate the presence of a R5 CodeableReference in FHIR R4

ShortDataType slice for a FHIR R5 `CodeableReference` valueAdditional content defined by implementations
Control10..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
194. Basic.extension:reason.extension:_datatype.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/StructureDefinition/_datatype"
}
<url value="http://hl7.org/fhir/StructureDefinition/_datatype"/>
196. Basic.extension:reason.extension:_datatype.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Comments

Must be: CodeableReference

Control10..1
Typestring, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Fixed Value
{
  "valueString" : "CodeableReference"
}
<valueString value="CodeableReference"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
198. Basic.extension:reason.extension:concept
Slice Nameconcept
Definition

R5: CodeableReference.concept

ShortR5: Reference to a concept (by class)Additional content defined by implementations
Comments

Element CodeableReference.concept is mapped to FHIR R4 element CodeableConcept as Equivalent.

Control0..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element CodeableReference.concept is mapped to FHIR R4 element CodeableConcept as Equivalent.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
200. Basic.extension:reason.extension:concept.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
202. Basic.extension:reason.extension:concept.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "concept"
}
<url value="concept"/>
204. Basic.extension:reason.extension:concept.value[x]
Definition

A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology.


Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortReference to a concept (by class)Value of extension
Control0..1
BindingFor example codes, see For codes, see Condition/Problem/DiagnosisCodes
(example to http://hl7.org/fhir/ValueSet/condition-code)
TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
206. Basic.extension:reason.extension:reference
Slice Namereference
Definition

R5: CodeableReference.reference

ShortR5: Reference to a resource (by instance)Additional content defined by implementations
Comments

Element CodeableReference.reference is mapped to FHIR R4 element Reference as Equivalent.

Control0..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element CodeableReference.reference is mapped to FHIR R4 element Reference as Equivalent.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
208. Basic.extension:reason.extension:reference.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "reference"
}
<url value="reference"/>
210. Basic.extension:reason.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.reason"
}
<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.reason"/>
212. Basic.extension:reason.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..01
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
214. Basic.extension:note
Slice Namenote
Definition

R5: NutritionIntake.note (new:Annotation)

ShortR5: Further information about the consumption (new)
Comments

Element NutritionIntake.note is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.note has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Further information about the consumption (new)) (Extension Type: Annotation)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
216. Basic.modifierExtension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensionExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control10..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.modifierExtension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
218. Basic.modifierExtension:status
Slice Namestatus
Definition

The status of a nutrition intake, using the required EventStatus binding from FHIR R5 NutritionIntake.status. Replaces the incompatible status binding in the R5-to-R4 cross-version package 0.1.0.

ShortPFE Nutrition Intake Status
Control1..1
This element is affected by the following invariants: ele-1
TypeExtension(PFE Nutrition Intake Status) (Extension Type: code)
Is Modifiertrue because The entered-in-error status means that the nutrition intake resource should not be treated as valid.
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
220. Basic.code
Definition

Identifies the 'type' of resource - equivalent to the resource name for other resources.

ShortKind of Resource
Comments

Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

This element is labeled as a modifier because it defines the meaning of the resource and cannot be ignored.

Control1..1
BindingFor example codes, see BasicResourceTypeshttp://hl7.org/fhir/ValueSet/basic-resource-type|4.0.1
(example to http://hl7.org/fhir/ValueSet/basic-resource-type|4.0.1)

Codes for identifying types of resources not yet defined by FHIR.

TypeCodeableConcept
Is Modifiertrue because This element determines what kind of resource is being represented which drives the meaning of all of the other elements.
Summarytrue
Requirements

Must be able to distinguish different types of Basic resources.

Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/fhir-types",
      "code" : "NutritionIntake"
    }
  ]
}
<code>
  <coding>
    <system value="http://hl7.org/fhir/fhir-types"/>
    <code value="NutritionIntake"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
222. Basic.subject
Definition

Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource.

ShortIdentifies the focus of this resource
Comments

Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension.

Control10..1
TypeReference(US Core Patient Profile, Resource)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Needed for partitioning the resource by Patient.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

See the documentation on how to interpret the contents of this table

0. Basic
2. Basic.language
BindingThe codes SHALL be taken from AllLanguages
(required to http://hl7.org/fhir/ValueSet/all-languages)
4. Basic.extension
Control1..?
SlicingThis element introduces a set of slices on Basic.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
6. Basic.extension:instantiatesCanonical
Slice NameinstantiatesCanonical
Definition

R5: NutritionIntake.instantiatesCanonical (new:canonical(ActivityDefinition,ChargeItemDefinition,ClinicalUseDefinition,EventDefinition,Measure,MessageDefinition,ObservationDefinition,OperationDefinition,PlanDefinition,Questionnaire,Requirements,SubscriptionTopic,TestPlan,TestScript))

ShortR5: Instantiates FHIR protocol or definition (new)
Comments

Element NutritionIntake.instantiatesCanonical is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.instantiatesCanonical has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..*
TypeExtension(R5: Instantiates FHIR protocol or definition (new)) (Extension Type: canonical(Cross-version Profile for R5.ActivityDefinition for use in FHIR R4, ActivityDefinition, Cross-version Profile for R5.ChargeItemDefinition for use in FHIR R4, ChargeItemDefinition, Cross-version Profile for R5.ClinicalUseDefinition for use in FHIR R4, Basic, Cross-version Profile for R5.EventDefinition for use in FHIR R4, EventDefinition, Cross-version Profile for R5.Measure for use in FHIR R4, Measure, Cross-version Profile for R5.MessageDefinition for use in FHIR R4, MessageDefinition, Cross-version Profile for R5.ObservationDefinition for use in FHIR R4, ObservationDefinition, Cross-version Profile for R5.OperationDefinition for use in FHIR R4, OperationDefinition, Cross-version Profile for R5.PlanDefinition for use in FHIR R4, PlanDefinition, Cross-version Profile for R5.Questionnaire for use in FHIR R4, Questionnaire, Cross-version Profile for R5.Requirements for use in FHIR R4, Basic, Cross-version Profile for R5.SubscriptionTopic for use in FHIR R4, Basic, Cross-version Profile for R5.TestPlan for use in FHIR R4, Basic, Cross-version Profile for R5.TestScript for use in FHIR R4, TestScript))
8. Basic.extension:instantiatesUri
Slice NameinstantiatesUri
Definition

R5: NutritionIntake.instantiatesUri (new:uri)

ShortR5: Instantiates external protocol or definition (new)
Comments

Element NutritionIntake.instantiatesUri is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.instantiatesUri has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..*
TypeExtension(R5: Instantiates external protocol or definition (new)) (Extension Type: uri)
10. Basic.extension:basedOn
Slice NamebasedOn
Definition

R5: NutritionIntake.basedOn (new:Reference(NutritionOrder,CarePlan,ServiceRequest))

ShortR5: Fulfils plan, proposal or order (new)
Comments

Element NutritionIntake.basedOn is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.basedOn has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

The order (e.g., nutrition order, service request) or plan (e.g., care plan) that the intake derives from.

Control0..*
TypeExtension(R5: Fulfils plan, proposal or order (new)) (Extension Type: Reference(Cross-version Profile for R5.NutritionOrder for use in FHIR R4, NutritionOrder, Cross-version Profile for R5.CarePlan for use in FHIR R4, CarePlan, Cross-version Profile for R5.ServiceRequest for use in FHIR R4, ServiceRequest))
12. Basic.extension:basedOn.extension
Control0..0
14. Basic.extension:basedOn.value[x]
TypeReference(Personal Functioning and Engagement Nutrition Order Profile, Cross-version Profile for R5.CarePlan for use in FHIR R4, CarePlan, Cross-version Profile for R5.ServiceRequest for use in FHIR R4, ServiceRequest)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
16. Basic.extension:partOf
Slice NamepartOf
Definition

R5: NutritionIntake.partOf (new:Reference(NutritionIntake,Procedure,Observation))

ShortR5: Part of referenced event (new)
Comments

Element NutritionIntake.partOf is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.partOf has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

The event (e.g., procedure, observation) during which the intake occurred or is related to

Control0..*
TypeExtension(R5: Part of referenced event (new)) (Extension Type: Reference(Cross-version Profile for R5.NutritionIntake for use in FHIR R4, Basic, Cross-version Profile for R5.Procedure for use in FHIR R4, Procedure, Cross-version Profile for R5.Observation for use in FHIR R4, Observation))
18. Basic.extension:partOf.extension
Control0..0
20. Basic.extension:partOf.value[x]
TypeReference(Personal Functioning and Engagement Nutrition Intake Profile, Cross-version Profile for R5.Procedure for use in FHIR R4, Procedure, Cross-version Profile for R5.Observation for use in FHIR R4, Observation)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
22. Basic.extension:statusReason
Slice NamestatusReason
Definition

R5: NutritionIntake.statusReason (new:CodeableConcept)

ShortR5: Reason for current status (new)
Comments

Element NutritionIntake.statusReason is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.statusReason has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). This is generally only used for "exception" statuses such as "not-taken", "on-hold", "cancelled" or "entered-in-error". The reason for performing the event at all is captured in reasonCode, not here.

Control0..*
TypeExtension(R5: Reason for current status (new)) (Extension Type: CodeableConcept)
24. Basic.extension:statusReason.extension
Control0..0
26. Basic.extension:statusReason.value[x]
BindingFor example codes, see PFE ClinicalImpression Status Reason
(example to http://hl7.org/fhir/us/pacio-pfe/ValueSet/pfe-clinicalimpression-status-reason)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
28. Basic.extension:code
Slice Namecode
Definition

R5: NutritionIntake.code (new:CodeableConcept)

ShortR5: Code representing an overall type of nutrition intake (new)
Comments

Element NutritionIntake.code is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.code has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
TypeExtension(R5: Code representing an overall type of nutrition intake (new)) (Extension Type: CodeableConcept)
Must Supporttrue
30. Basic.extension:code.extension
Control0..0
32. Basic.extension:code.value[x]
BindingFor example codes, see DietCodes
(example to http://hl7.org/fhir/ValueSet/diet-type)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
34. Basic.extension:encounter
Slice Nameencounter
Definition

R5: NutritionIntake.encounter (new:Reference(Encounter))

ShortR5: Encounter associated with NutritionIntake (new)
Comments

Element NutritionIntake.encounter is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.encounter has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
TypeExtension(R5: Encounter associated with NutritionIntake (new)) (Extension Type: Reference(Cross-version Profile for R5.Encounter for use in FHIR R4, Encounter))
36. Basic.extension:occurrence
Slice Nameoccurrence
Definition

R5: NutritionIntake.occurrence[x] (new:dateTime, Period)

ShortR5: The date/time or interval when the food or fluid is/was consumed (new)
Comments

Element NutritionIntake.occurrence[x] is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.occurrence[x] has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). This attribute reflects the period over which the patient consumed the food fluid and is expected to be populated on the majority of NutritionIntake. If the food or fluid is still being taken and is expected to continue indefinitely at the time the usage is recorded, the "end" date will be omitted. If the end date is known, then it is included as the "end date". The date/time attribute supports a variety of dates - year, year/month and exact date. If something more than this is required, this should be conveyed as text.

Control0..1
TypeExtension(R5: The date/time or interval when the food or fluid is/was consumed (new)) (Extension Type: Choice of: dateTime, Period)
Must Supporttrue
38. Basic.extension:recorded
Slice Namerecorded
Definition

R5: NutritionIntake.recorded (new:dateTime)

ShortR5: When the intake was recorded (new)
Comments

Element NutritionIntake.recorded is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.recorded has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
TypeExtension(R5: When the intake was recorded (new)) (Extension Type: dateTime)
40. Basic.extension:reported
Slice Namereported
Definition

R5: NutritionIntake.reported[x] (new:boolean, Reference(Patient,RelatedPerson,Practitioner,PractitionerRole,Organization))

ShortR5: Person or organization that provided the information about the consumption of this food or fluid (new)
Comments

Element NutritionIntake.reported[x] is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.reported[x] has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
TypeExtension(R5: Person or organization that provided the information about the consumption of this food or fluid (new)) (Extension Type: Choice of: boolean, Reference(Cross-version Profile for R5.Patient for use in FHIR R4, Patient, Cross-version Profile for R5.RelatedPerson for use in FHIR R4, RelatedPerson, Cross-version Profile for R5.Practitioner for use in FHIR R4, Practitioner, Cross-version Profile for R5.PractitionerRole for use in FHIR R4, PractitionerRole, Cross-version Profile for R5.Organization for use in FHIR R4, Organization))
42. Basic.extension:consumedItem
Slice NameconsumedItem
Definition

R5: NutritionIntake.consumedItem (new:BackboneElement)

ShortR5: What food or fluid product or item was consumed (new)
Comments

Element NutritionIntake.consumedItem is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control1..*
TypeExtension(R5: What food or fluid product or item was consumed (new)) (Complex Extension)
Must Supporttrue
44. Basic.extension:consumedItem.extension:type
Slice Nametype
ShortThe type of food (i.e. solid or liquid) product or item that was consumed
Must Supporttrue
46. Basic.extension:consumedItem.extension:type.extension
Control0..0
48. Basic.extension:consumedItem.extension:type.value[x]
BindingFor example codes, see Types of Edible Substances
(example to http://terminology.hl7.org/ValueSet/edible-substance-type)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
50. Basic.extension:consumedItem.extension:nutritionProduct
Slice NamenutritionProduct
Definition

Identifies the food (i.e. solid and/or liquid) product that is to be consumed. This is potentially a link to a resource representing the details of the food product or a simple attribute carrying a code that identifies the food from a known list of foods.

ShortA product used for nutritional purposes (e.g. food or supplement)
Must Supporttrue
52. Basic.extension:consumedItem.extension:nutritionProduct.extension:concept
Slice Nameconcept
54. Basic.extension:consumedItem.extension:nutritionProduct.extension:concept.extension
Control0..0
56. Basic.extension:consumedItem.extension:nutritionProduct.extension:concept.value[x]
BindingFor example codes, see FoodTypeCodes
(example to http://hl7.org/fhir/ValueSet/food-type)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
58. Basic.extension:consumedItem.extension:nutritionProduct.extension:reference
Slice Namereference
60. Basic.extension:consumedItem.extension:nutritionProduct.extension:reference.extension
Control0..0
62. Basic.extension:consumedItem.extension:nutritionProduct.extension:reference.value[x]
TypeReference(Personal Functioning and Engagement Nutrition Product Profile)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
64. Basic.extension:consumedItem.extension:amount
Slice Nameamount
ShortQuantity of the specified food (i.e. solid and/or liquid).
Must Supporttrue
66. Basic.extension:consumedItem.extension:rate
Slice Namerate
ShortRate of enteral feeding administration.
Must Supporttrue
68. Basic.extension:consumedItem.extension:notConsumedReason
Slice NamenotConsumedReason
70. Basic.extension:consumedItem.extension:notConsumedReason.extension
Control0..0
72. Basic.extension:consumedItem.extension:notConsumedReason.value[x]
BindingFor example codes, see PFE Reasons for why a food item was not consumed
(example to http://hl7.org/fhir/us/pacio-pfe/ValueSet/pfe-not-consumed-reason)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
74. Basic.extension:ingredientLabel
Slice NameingredientLabel
Definition

R5: NutritionIntake.ingredientLabel (new:BackboneElement)

ShortR5: Total nutrient for the whole meal, product, serving (new)
Comments

Element NutritionIntake.ingredientLabel is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.ingredientLabel has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Individual item nutrients are not currently included in the resource and will likely end up as a reference in nutritionProduct to represent the individual items.

Control0..*
TypeExtension(R5: Total nutrient for the whole meal, product, serving (new)) (Complex Extension)
76. Basic.extension:ingredientLabel.extension:nutrient
Slice Namenutrient
78. Basic.extension:ingredientLabel.extension:nutrient.extension:concept
Slice Nameconcept
80. Basic.extension:ingredientLabel.extension:nutrient.extension:concept.extension
Control0..0
82. Basic.extension:ingredientLabel.extension:nutrient.extension:concept.value[x]
BindingFor example codes, see NutrientModifierCodes
(example to http://hl7.org/fhir/ValueSet/nutrient-code)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
84. Basic.extension:performer
Slice Nameperformer
Definition

R5: NutritionIntake.performer (new:BackboneElement)

ShortR5: Who was performed in the intake (new)
Comments

Element NutritionIntake.performer is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.performer has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..*
TypeExtension(R5: Who was performed in the intake (new)) (Complex Extension)
86. Basic.extension:performer.extension:function
Slice Namefunction
88. Basic.extension:performer.extension:function.extension
Control0..0
90. Basic.extension:performer.extension:function.value[x]
BindingFor example codes, see ProcedurePerformerRoleCodes
(example to http://hl7.org/fhir/ValueSet/performer-role)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
92. Basic.extension:location
Slice Namelocation
Definition

R5: NutritionIntake.location (new:Reference(Location))

ShortR5: Where the intake occurred (new)
Comments

Element NutritionIntake.location is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.location has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
TypeExtension(R5: Where the intake occurred (new)) (Extension Type: Reference(Cross-version Profile for R5.Location for use in FHIR R4, Location))
94. Basic.extension:derivedFrom
Slice NamederivedFrom
Definition

R5: NutritionIntake.derivedFrom (new:Reference(Resource))

ShortR5: Additional supporting information (new)
Comments

Element NutritionIntake.derivedFrom is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.derivedFrom has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Likely references would be to AllergyIntolerance, Observation or QuestionnaireAnswers.

Control0..*
TypeExtension(R5: Additional supporting information (new)) (Extension Type: Reference(Cross-version Profile for R5.Resource for use in FHIR R4, Resource))
96. Basic.extension:reason
Slice Namereason
Definition

R5: NutritionIntake.reason (new:CodeableReference(Condition,Observation,DiagnosticReport,DocumentReference))

ShortR5: Reason for why the food or fluid is /was consumed (new)
Comments

Element NutritionIntake.reason is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.reason has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..*
TypeExtension(R5: Reason for why the food or fluid is /was consumed (new)) (Complex Extension)
98. Basic.extension:reason.extension:concept
Slice Nameconcept
100. Basic.extension:reason.extension:concept.extension
Control0..0
102. Basic.extension:reason.extension:concept.value[x]
BindingFor example codes, see Condition/Problem/DiagnosisCodes
(example to http://hl7.org/fhir/ValueSet/condition-code)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
104. Basic.extension:note
Slice Namenote
Definition

R5: NutritionIntake.note (new:Annotation)

ShortR5: Further information about the consumption (new)
Comments

Element NutritionIntake.note is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.note has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..*
TypeExtension(R5: Further information about the consumption (new)) (Extension Type: Annotation)
106. Basic.modifierExtension
Control1..?
SlicingThis element introduces a set of slices on Basic.modifierExtension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
108. Basic.modifierExtension:status
Slice Namestatus
Control1..1
TypeExtension(PFE Nutrition Intake Status) (Extension Type: code)
Must Supporttrue
110. Basic.code
Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/fhir-types",
      "code" : "NutritionIntake"
    }
  ]
}
<code>
  <coding>
    <system value="http://hl7.org/fhir/fhir-types"/>
    <code value="NutritionIntake"/>
  </coding>
</code>
112. Basic.subject
Control1..?
TypeReference(US Core Patient Profile)
Must Supporttrue

See the documentation on how to interpret the contents of this table

0. Basic
Definition

Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

ShortResource for non-supported content
Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesZ-resource, Extension-resource, Custom-resource
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Basic.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. Basic.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Basic.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Basic.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHALL be taken from AllLanguages
(required to http://hl7.org/fhir/ValueSet/all-languages)
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Basic.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Basic.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control0..*
TypeResource
Is Modifierfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. Basic.extension
Definition

An Extension

ShortExtension
Control1..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
16. Basic.extension:instantiatesCanonical
Slice NameinstantiatesCanonical
Definition

R5: NutritionIntake.instantiatesCanonical (new:canonical(ActivityDefinition,ChargeItemDefinition,ClinicalUseDefinition,EventDefinition,Measure,MessageDefinition,ObservationDefinition,OperationDefinition,PlanDefinition,Questionnaire,Requirements,SubscriptionTopic,TestPlan,TestScript))

ShortR5: Instantiates FHIR protocol or definition (new)
Comments

Element NutritionIntake.instantiatesCanonical is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.instantiatesCanonical has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Instantiates FHIR protocol or definition (new)) (Extension Type: canonical(Cross-version Profile for R5.ActivityDefinition for use in FHIR R4, ActivityDefinition, Cross-version Profile for R5.ChargeItemDefinition for use in FHIR R4, ChargeItemDefinition, Cross-version Profile for R5.ClinicalUseDefinition for use in FHIR R4, Basic, Cross-version Profile for R5.EventDefinition for use in FHIR R4, EventDefinition, Cross-version Profile for R5.Measure for use in FHIR R4, Measure, Cross-version Profile for R5.MessageDefinition for use in FHIR R4, MessageDefinition, Cross-version Profile for R5.ObservationDefinition for use in FHIR R4, ObservationDefinition, Cross-version Profile for R5.OperationDefinition for use in FHIR R4, OperationDefinition, Cross-version Profile for R5.PlanDefinition for use in FHIR R4, PlanDefinition, Cross-version Profile for R5.Questionnaire for use in FHIR R4, Questionnaire, Cross-version Profile for R5.Requirements for use in FHIR R4, Basic, Cross-version Profile for R5.SubscriptionTopic for use in FHIR R4, Basic, Cross-version Profile for R5.TestPlan for use in FHIR R4, Basic, Cross-version Profile for R5.TestScript for use in FHIR R4, TestScript))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Basic.extension:instantiatesUri
Slice NameinstantiatesUri
Definition

R5: NutritionIntake.instantiatesUri (new:uri)

ShortR5: Instantiates external protocol or definition (new)
Comments

Element NutritionIntake.instantiatesUri is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.instantiatesUri has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Instantiates external protocol or definition (new)) (Extension Type: uri)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. Basic.extension:basedOn
Slice NamebasedOn
Definition

R5: NutritionIntake.basedOn (new:Reference(NutritionOrder,CarePlan,ServiceRequest))

ShortR5: Fulfils plan, proposal or order (new)
Comments

Element NutritionIntake.basedOn is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.basedOn has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

The order (e.g., nutrition order, service request) or plan (e.g., care plan) that the intake derives from.

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Fulfils plan, proposal or order (new)) (Extension Type: Reference(Cross-version Profile for R5.NutritionOrder for use in FHIR R4, NutritionOrder, Cross-version Profile for R5.CarePlan for use in FHIR R4, CarePlan, Cross-version Profile for R5.ServiceRequest for use in FHIR R4, ServiceRequest))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. Basic.extension:basedOn.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
24. Basic.extension:basedOn.extension
Definition

An Extension

ShortExtension
Control0..0
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
26. Basic.extension:basedOn.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.basedOn"
}
<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.basedOn"/>
28. Basic.extension:basedOn.value[x]
Definition

A plan, proposal or order that is fulfilled in whole or in part by this event.

ShortFulfils plan, proposal or order
Control0..1
TypeReference(Personal Functioning and Engagement Nutrition Order Profile, Cross-version Profile for R5.CarePlan for use in FHIR R4, CarePlan, Cross-version Profile for R5.ServiceRequest for use in FHIR R4, ServiceRequest)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Basic.extension:partOf
Slice NamepartOf
Definition

R5: NutritionIntake.partOf (new:Reference(NutritionIntake,Procedure,Observation))

ShortR5: Part of referenced event (new)
Comments

Element NutritionIntake.partOf is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.partOf has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

The event (e.g., procedure, observation) during which the intake occurred or is related to

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Part of referenced event (new)) (Extension Type: Reference(Cross-version Profile for R5.NutritionIntake for use in FHIR R4, Basic, Cross-version Profile for R5.Procedure for use in FHIR R4, Procedure, Cross-version Profile for R5.Observation for use in FHIR R4, Observation))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
32. Basic.extension:partOf.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
34. Basic.extension:partOf.extension
Definition

An Extension

ShortExtension
Control0..0
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
36. Basic.extension:partOf.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.partOf"
}
<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.partOf"/>
38. Basic.extension:partOf.value[x]
Definition

A larger event of which this particular event is a component or step.

ShortPart of referenced event
Control0..1
TypeReference(Personal Functioning and Engagement Nutrition Intake Profile, Cross-version Profile for R5.Procedure for use in FHIR R4, Procedure, Cross-version Profile for R5.Observation for use in FHIR R4, Observation)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Basic.extension:statusReason
Slice NamestatusReason
Definition

R5: NutritionIntake.statusReason (new:CodeableConcept)

ShortR5: Reason for current status (new)
Comments

Element NutritionIntake.statusReason is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.statusReason has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). This is generally only used for "exception" statuses such as "not-taken", "on-hold", "cancelled" or "entered-in-error". The reason for performing the event at all is captured in reasonCode, not here.

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Reason for current status (new)) (Extension Type: CodeableConcept)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
42. Basic.extension:statusReason.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
44. Basic.extension:statusReason.extension
Definition

An Extension

ShortExtension
Control0..0
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
46. Basic.extension:statusReason.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.statusReason"
}
<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.statusReason"/>
48. Basic.extension:statusReason.value[x]
Definition

Captures the reason for the current state of the NutritionIntake.

ShortReason for current status
Comments

This is generally only used for "exception" statuses such as "not-taken", "on-hold", "cancelled" or "entered-in-error". The reason for performing the event at all is captured in reasonCode, not here.

Control0..1
BindingFor example codes, see PFE ClinicalImpression Status Reason
(example to http://hl7.org/fhir/us/pacio-pfe/ValueSet/pfe-clinicalimpression-status-reason)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Basic.extension:code
Slice Namecode
Definition

R5: NutritionIntake.code (new:CodeableConcept)

ShortR5: Code representing an overall type of nutrition intake (new)
Comments

Element NutritionIntake.code is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.code has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(R5: Code representing an overall type of nutrition intake (new)) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
52. Basic.extension:code.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
54. Basic.extension:code.extension
Definition

An Extension

ShortExtension
Control0..0
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
56. Basic.extension:code.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.code"
}
<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.code"/>
58. Basic.extension:code.value[x]
Definition

Overall type of nutrition intake.

ShortCode representing an overall type of nutrition intake
Control0..1
BindingFor example codes, see DietCodes
(example to http://hl7.org/fhir/ValueSet/diet-type)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. Basic.extension:encounter
Slice Nameencounter
Definition

R5: NutritionIntake.encounter (new:Reference(Encounter))

ShortR5: Encounter associated with NutritionIntake (new)
Comments

Element NutritionIntake.encounter is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.encounter has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(R5: Encounter associated with NutritionIntake (new)) (Extension Type: Reference(Cross-version Profile for R5.Encounter for use in FHIR R4, Encounter))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
62. Basic.extension:occurrence
Slice Nameoccurrence
Definition

R5: NutritionIntake.occurrence[x] (new:dateTime, Period)

ShortR5: The date/time or interval when the food or fluid is/was consumed (new)
Comments

Element NutritionIntake.occurrence[x] is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.occurrence[x] has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). This attribute reflects the period over which the patient consumed the food fluid and is expected to be populated on the majority of NutritionIntake. If the food or fluid is still being taken and is expected to continue indefinitely at the time the usage is recorded, the "end" date will be omitted. If the end date is known, then it is included as the "end date". The date/time attribute supports a variety of dates - year, year/month and exact date. If something more than this is required, this should be conveyed as text.

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(R5: The date/time or interval when the food or fluid is/was consumed (new)) (Extension Type: Choice of: dateTime, Period)
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
64. Basic.extension:recorded
Slice Namerecorded
Definition

R5: NutritionIntake.recorded (new:dateTime)

ShortR5: When the intake was recorded (new)
Comments

Element NutritionIntake.recorded is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.recorded has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(R5: When the intake was recorded (new)) (Extension Type: dateTime)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
66. Basic.extension:reported
Slice Namereported
Definition

R5: NutritionIntake.reported[x] (new:boolean, Reference(Patient,RelatedPerson,Practitioner,PractitionerRole,Organization))

ShortR5: Person or organization that provided the information about the consumption of this food or fluid (new)
Comments

Element NutritionIntake.reported[x] is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.reported[x] has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(R5: Person or organization that provided the information about the consumption of this food or fluid (new)) (Extension Type: Choice of: boolean, Reference(Cross-version Profile for R5.Patient for use in FHIR R4, Patient, Cross-version Profile for R5.RelatedPerson for use in FHIR R4, RelatedPerson, Cross-version Profile for R5.Practitioner for use in FHIR R4, Practitioner, Cross-version Profile for R5.PractitionerRole for use in FHIR R4, PractitionerRole, Cross-version Profile for R5.Organization for use in FHIR R4, Organization))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
68. Basic.extension:consumedItem
Slice NameconsumedItem
Definition

R5: NutritionIntake.consumedItem (new:BackboneElement)

ShortR5: What food or fluid product or item was consumed (new)
Comments

Element NutritionIntake.consumedItem is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control1..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: What food or fluid product or item was consumed (new)) (Complex Extension)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
70. Basic.extension:consumedItem.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
72. Basic.extension:consumedItem.extension
Definition

An Extension

ShortExtension
Control2..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
74. Basic.extension:consumedItem.extension:type
Slice Nametype
Definition

R5: NutritionIntake.consumedItem.type (new:CodeableConcept)

ShortThe type of food (i.e. solid or liquid) product or item that was consumed
Comments

Element NutritionIntake.consumedItem.type is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.type is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.type has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control1..1
TypeExtension
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Element NutritionIntake.consumedItem.type is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.type is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.type has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
76. Basic.extension:consumedItem.extension:type.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
78. Basic.extension:consumedItem.extension:type.extension
Definition

An Extension

ShortExtension
Control0..0
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
80. Basic.extension:consumedItem.extension:type.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "type"
}
<url value="type"/>
82. Basic.extension:consumedItem.extension:type.value[x]
Definition

Indicates what a category of item that was consumed: e.g., food, fluid, enteral, etc.

ShortThe type of food or fluid product
Control1..1
BindingFor example codes, see Types of Edible Substances
(example to http://terminology.hl7.org/ValueSet/edible-substance-type)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. Basic.extension:consumedItem.extension:nutritionProduct
Slice NamenutritionProduct
Definition

Identifies the food (i.e. solid and/or liquid) product that is to be consumed. This is potentially a link to a resource representing the details of the food product or a simple attribute carrying a code that identifies the food from a known list of foods.

ShortA product used for nutritional purposes (e.g. food or supplement)
Comments

Element NutritionIntake.consumedItem.nutritionProduct is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.nutritionProduct is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.nutritionProduct has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of a new nutritionProduct resource is recommended.

Control1..1
TypeExtension
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Element NutritionIntake.consumedItem.nutritionProduct is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.nutritionProduct is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.nutritionProduct has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
86. Basic.extension:consumedItem.extension:nutritionProduct.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
88. Basic.extension:consumedItem.extension:nutritionProduct.extension
Definition

An Extension

ShortExtension
Control1..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
90. Basic.extension:consumedItem.extension:nutritionProduct.extension:_datatype
Slice Name_datatype
Definition

Slice to indicate the presence of a R5 CodeableReference in FHIR R4

ShortDataType slice for a FHIR R5 `CodeableReference` value
Control1..1
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
92. Basic.extension:consumedItem.extension:nutritionProduct.extension:_datatype.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
94. Basic.extension:consumedItem.extension:nutritionProduct.extension:_datatype.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
96. Basic.extension:consumedItem.extension:nutritionProduct.extension:_datatype.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/StructureDefinition/_datatype"
}
<url value="http://hl7.org/fhir/StructureDefinition/_datatype"/>
98. Basic.extension:consumedItem.extension:nutritionProduct.extension:_datatype.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Comments

Must be: CodeableReference

Control1..1
Typestring
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Fixed Value
{
  "valueString" : "CodeableReference"
}
<valueString value="CodeableReference"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. Basic.extension:consumedItem.extension:nutritionProduct.extension:concept
Slice Nameconcept
Definition

R5: CodeableReference.concept

ShortR5: Reference to a concept (by class)
Comments

Element CodeableReference.concept is mapped to FHIR R4 element CodeableConcept as Equivalent.

Control0..1
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element CodeableReference.concept is mapped to FHIR R4 element CodeableConcept as Equivalent.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
102. Basic.extension:consumedItem.extension:nutritionProduct.extension:concept.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
104. Basic.extension:consumedItem.extension:nutritionProduct.extension:concept.extension
Definition

An Extension

ShortExtension
Control0..0
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
106. Basic.extension:consumedItem.extension:nutritionProduct.extension:concept.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "concept"
}
<url value="concept"/>
108. Basic.extension:consumedItem.extension:nutritionProduct.extension:concept.value[x]
Definition

A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology.

ShortReference to a concept (by class)
Control0..1
BindingFor example codes, see FoodTypeCodes
(example to http://hl7.org/fhir/ValueSet/food-type)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
110. Basic.extension:consumedItem.extension:nutritionProduct.extension:reference
Slice Namereference
Definition

R5: CodeableReference.reference

ShortR5: Reference to a resource (by instance)
Comments

Element CodeableReference.reference is mapped to FHIR R4 element Reference as Equivalent.

Control0..1
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element CodeableReference.reference is mapped to FHIR R4 element Reference as Equivalent.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
112. Basic.extension:consumedItem.extension:nutritionProduct.extension:reference.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
114. Basic.extension:consumedItem.extension:nutritionProduct.extension:reference.extension
Definition

An Extension

ShortExtension
Control0..0
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
116. Basic.extension:consumedItem.extension:nutritionProduct.extension:reference.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "reference"
}
<url value="reference"/>
118. Basic.extension:consumedItem.extension:nutritionProduct.extension:reference.value[x]
Definition

A reference to a resource the provides exact details about the information being referenced.

ShortReference to a resource (by instance)
Control0..1
TypeReference(Personal Functioning and Engagement Nutrition Product Profile)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
120. Basic.extension:consumedItem.extension:nutritionProduct.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "nutritionProduct"
}
<url value="nutritionProduct"/>
122. Basic.extension:consumedItem.extension:nutritionProduct.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..0
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
124. Basic.extension:consumedItem.extension:schedule
Slice Nameschedule
Definition

R5: NutritionIntake.consumedItem.schedule (new:Timing)

ShortR5: Scheduled frequency of consumption (new)
Comments

Element NutritionIntake.consumedItem.schedule is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.schedule is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.schedule has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element NutritionIntake.consumedItem.schedule is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.schedule is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.schedule has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
126. Basic.extension:consumedItem.extension:schedule.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
128. Basic.extension:consumedItem.extension:schedule.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
130. Basic.extension:consumedItem.extension:schedule.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "schedule"
}
<url value="schedule"/>
132. Basic.extension:consumedItem.extension:schedule.value[x]
Definition

Scheduled frequency of consumption.

ShortScheduled frequency of consumption
Control0..1
TypeTiming
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
134. Basic.extension:consumedItem.extension:amount
Slice Nameamount
Definition

R5: NutritionIntake.consumedItem.amount (new:Quantity[SimpleQuantity])

ShortQuantity of the specified food (i.e. solid and/or liquid).
Comments

Element NutritionIntake.consumedItem.amount is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.amount is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.amount has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
TypeExtension
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Element NutritionIntake.consumedItem.amount is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.amount is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.amount has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
136. Basic.extension:consumedItem.extension:amount.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
138. Basic.extension:consumedItem.extension:amount.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
140. Basic.extension:consumedItem.extension:amount.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "amount"
}
<url value="amount"/>
142. Basic.extension:consumedItem.extension:amount.value[x]
Definition

Quantity of the specified food.

ShortQuantity of the specified food
Control0..1
TypeQuantity(SimpleQuantity)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
sqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())
144. Basic.extension:consumedItem.extension:rate
Slice Namerate
Definition

R5: NutritionIntake.consumedItem.rate (new:Quantity[SimpleQuantity])

ShortRate of enteral feeding administration.
Comments

Element NutritionIntake.consumedItem.rate is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.rate is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.rate has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
TypeExtension
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Element NutritionIntake.consumedItem.rate is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.rate is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.rate has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
146. Basic.extension:consumedItem.extension:rate.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
148. Basic.extension:consumedItem.extension:rate.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
150. Basic.extension:consumedItem.extension:rate.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "rate"
}
<url value="rate"/>
152. Basic.extension:consumedItem.extension:rate.value[x]
Definition

Rate at which enteral feeding was administered.

ShortRate at which enteral feeding was administered
Control0..1
TypeQuantity(SimpleQuantity)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
sqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())
154. Basic.extension:consumedItem.extension:notConsumed
Slice NamenotConsumed
Definition

R5: NutritionIntake.consumedItem.notConsumed (new:boolean)

ShortR5: Flag to indicate if the food or fluid item was refused or otherwise not consumed (new)
Comments

Element NutritionIntake.consumedItem.notConsumed is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.notConsumed is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.notConsumed has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element NutritionIntake.consumedItem.notConsumed is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.notConsumed is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.notConsumed has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
156. Basic.extension:consumedItem.extension:notConsumed.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
158. Basic.extension:consumedItem.extension:notConsumed.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
160. Basic.extension:consumedItem.extension:notConsumed.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "notConsumed"
}
<url value="notConsumed"/>
162. Basic.extension:consumedItem.extension:notConsumed.value[x]
Definition

Indicator when a patient is in a setting where it is helpful to know if food was not consumed, such as it was refused, held (as in tube feedings), or otherwise not provided. If a consumption is being recorded from an app, such as MyFitnessPal, this indicator will likely not be used.

ShortFlag to indicate if the food or fluid item was refused or otherwise not consumed
Control0..1
Typeboolean
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
164. Basic.extension:consumedItem.extension:notConsumedReason
Slice NamenotConsumedReason
Definition

R5: NutritionIntake.consumedItem.notConsumedReason (new:CodeableConcept)

ShortR5: Reason food or fluid was not consumed (new)
Comments

Element NutritionIntake.consumedItem.notConsumedReason is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.notConsumedReason is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.notConsumedReason has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element NutritionIntake.consumedItem.notConsumedReason is part of an existing definition because parent element NutritionIntake.consumedItem requires a cross-version extension. Element NutritionIntake.consumedItem.notConsumedReason is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.consumedItem.notConsumedReason has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
166. Basic.extension:consumedItem.extension:notConsumedReason.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
168. Basic.extension:consumedItem.extension:notConsumedReason.extension
Definition

An Extension

ShortExtension
Control0..0
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
170. Basic.extension:consumedItem.extension:notConsumedReason.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "notConsumedReason"
}
<url value="notConsumedReason"/>
172. Basic.extension:consumedItem.extension:notConsumedReason.value[x]
Definition

Document the reason the food or fluid was not consumed, such as refused, held, etc.

ShortReason food or fluid was not consumed
Control0..1
BindingFor example codes, see PFE Reasons for why a food item was not consumed
(example to http://hl7.org/fhir/us/pacio-pfe/ValueSet/pfe-not-consumed-reason)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
174. Basic.extension:consumedItem.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.consumedItem"
}
<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.consumedItem"/>
176. Basic.extension:consumedItem.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..0
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
178. Basic.extension:ingredientLabel
Slice NameingredientLabel
Definition

R5: NutritionIntake.ingredientLabel (new:BackboneElement)

ShortR5: Total nutrient for the whole meal, product, serving (new)
Comments

Element NutritionIntake.ingredientLabel is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.ingredientLabel has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Individual item nutrients are not currently included in the resource and will likely end up as a reference in nutritionProduct to represent the individual items.

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Total nutrient for the whole meal, product, serving (new)) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
180. Basic.extension:ingredientLabel.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
182. Basic.extension:ingredientLabel.extension
Definition

An Extension

ShortExtension
Control2..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
184. Basic.extension:ingredientLabel.extension:nutrient
Slice Namenutrient
Definition

R5: NutritionIntake.ingredientLabel.nutrient (new:CodeableReference(Substance))

ShortR5: Total nutrient consumed (new)
Comments

Element NutritionIntake.ingredientLabel.nutrient is part of an existing definition because parent element NutritionIntake.ingredientLabel requires a cross-version extension. Element NutritionIntake.ingredientLabel.nutrient is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.ingredientLabel.nutrient has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control1..1
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element NutritionIntake.ingredientLabel.nutrient is part of an existing definition because parent element NutritionIntake.ingredientLabel requires a cross-version extension. Element NutritionIntake.ingredientLabel.nutrient is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.ingredientLabel.nutrient has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
186. Basic.extension:ingredientLabel.extension:nutrient.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
188. Basic.extension:ingredientLabel.extension:nutrient.extension
Definition

An Extension

ShortExtension
Control1..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
190. Basic.extension:ingredientLabel.extension:nutrient.extension:_datatype
Slice Name_datatype
Definition

Slice to indicate the presence of a R5 CodeableReference in FHIR R4

ShortDataType slice for a FHIR R5 `CodeableReference` value
Control1..1
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
192. Basic.extension:ingredientLabel.extension:nutrient.extension:_datatype.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
194. Basic.extension:ingredientLabel.extension:nutrient.extension:_datatype.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
196. Basic.extension:ingredientLabel.extension:nutrient.extension:_datatype.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/StructureDefinition/_datatype"
}
<url value="http://hl7.org/fhir/StructureDefinition/_datatype"/>
198. Basic.extension:ingredientLabel.extension:nutrient.extension:_datatype.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Comments

Must be: CodeableReference

Control1..1
Typestring
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Fixed Value
{
  "valueString" : "CodeableReference"
}
<valueString value="CodeableReference"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
200. Basic.extension:ingredientLabel.extension:nutrient.extension:concept
Slice Nameconcept
Definition

R5: CodeableReference.concept

ShortR5: Reference to a concept (by class)
Comments

Element CodeableReference.concept is mapped to FHIR R4 element CodeableConcept as Equivalent.

Control0..1
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element CodeableReference.concept is mapped to FHIR R4 element CodeableConcept as Equivalent.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
202. Basic.extension:ingredientLabel.extension:nutrient.extension:concept.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
204. Basic.extension:ingredientLabel.extension:nutrient.extension:concept.extension
Definition

An Extension

ShortExtension
Control0..0
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
206. Basic.extension:ingredientLabel.extension:nutrient.extension:concept.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "concept"
}
<url value="concept"/>
208. Basic.extension:ingredientLabel.extension:nutrient.extension:concept.value[x]
Definition

A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology.

ShortReference to a concept (by class)
Control0..1
BindingFor example codes, see NutrientModifierCodes
(example to http://hl7.org/fhir/ValueSet/nutrient-code)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
210. Basic.extension:ingredientLabel.extension:nutrient.extension:reference
Slice Namereference
Definition

R5: CodeableReference.reference

ShortR5: Reference to a resource (by instance)
Comments

Element CodeableReference.reference is mapped to FHIR R4 element Reference as Equivalent.

Control0..1
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element CodeableReference.reference is mapped to FHIR R4 element Reference as Equivalent.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
212. Basic.extension:ingredientLabel.extension:nutrient.extension:reference.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
214. Basic.extension:ingredientLabel.extension:nutrient.extension:reference.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
216. Basic.extension:ingredientLabel.extension:nutrient.extension:reference.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "reference"
}
<url value="reference"/>
218. Basic.extension:ingredientLabel.extension:nutrient.extension:reference.value[x]
Definition

A reference to a resource the provides exact details about the information being referenced.

ShortReference to a resource (by instance)
Control0..1
TypeReference(Cross-version Profile for R5.Substance for use in FHIR R4, Substance)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
220. Basic.extension:ingredientLabel.extension:nutrient.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "nutrient"
}
<url value="nutrient"/>
222. Basic.extension:ingredientLabel.extension:nutrient.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..0
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
224. Basic.extension:ingredientLabel.extension:amount
Slice Nameamount
Definition

R5: NutritionIntake.ingredientLabel.amount (new:Quantity[SimpleQuantity])

ShortR5: Total amount of nutrient consumed (new)
Comments

Element NutritionIntake.ingredientLabel.amount is part of an existing definition because parent element NutritionIntake.ingredientLabel requires a cross-version extension. Element NutritionIntake.ingredientLabel.amount is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.ingredientLabel.amount has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control1..1
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element NutritionIntake.ingredientLabel.amount is part of an existing definition because parent element NutritionIntake.ingredientLabel requires a cross-version extension. Element NutritionIntake.ingredientLabel.amount is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.ingredientLabel.amount has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
226. Basic.extension:ingredientLabel.extension:amount.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
228. Basic.extension:ingredientLabel.extension:amount.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
230. Basic.extension:ingredientLabel.extension:amount.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "amount"
}
<url value="amount"/>
232. Basic.extension:ingredientLabel.extension:amount.value[x]
Definition

Total amount of nutrient consumed.

ShortTotal amount of nutrient consumed
Control1..1
TypeQuantity(SimpleQuantity)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
sqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())
234. Basic.extension:ingredientLabel.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.ingredientLabel"
}
<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.ingredientLabel"/>
236. Basic.extension:ingredientLabel.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..0
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
238. Basic.extension:performer
Slice Nameperformer
Definition

R5: NutritionIntake.performer (new:BackboneElement)

ShortR5: Who was performed in the intake (new)
Comments

Element NutritionIntake.performer is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.performer has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Who was performed in the intake (new)) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
240. Basic.extension:performer.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
242. Basic.extension:performer.extension
Definition

An Extension

ShortExtension
Control1..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
244. Basic.extension:performer.extension:function
Slice Namefunction
Definition

R5: NutritionIntake.performer.function (new:CodeableConcept)

ShortR5: Type of performer (new)
Comments

Element NutritionIntake.performer.function is part of an existing definition because parent element NutritionIntake.performer requires a cross-version extension. Element NutritionIntake.performer.function is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.performer.function has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element NutritionIntake.performer.function is part of an existing definition because parent element NutritionIntake.performer requires a cross-version extension. Element NutritionIntake.performer.function is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.performer.function has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
246. Basic.extension:performer.extension:function.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
248. Basic.extension:performer.extension:function.extension
Definition

An Extension

ShortExtension
Control0..0
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
250. Basic.extension:performer.extension:function.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "function"
}
<url value="function"/>
252. Basic.extension:performer.extension:function.value[x]
Definition

Type of performer.

ShortType of performer
Control0..1
BindingFor example codes, see ProcedurePerformerRoleCodes
(example to http://hl7.org/fhir/ValueSet/performer-role)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
254. Basic.extension:performer.extension:actor
Slice Nameactor
Definition

R5: NutritionIntake.performer.actor (new:Reference(Practitioner,PractitionerRole,Organization,CareTeam,Patient,Device,RelatedPerson))

ShortR5: Who performed the intake (new)
Comments

Element NutritionIntake.performer.actor is part of an existing definition because parent element NutritionIntake.performer requires a cross-version extension. Element NutritionIntake.performer.actor is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.performer.actor has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control1..1
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element NutritionIntake.performer.actor is part of an existing definition because parent element NutritionIntake.performer requires a cross-version extension. Element NutritionIntake.performer.actor is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.performer.actor has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
256. Basic.extension:performer.extension:actor.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
258. Basic.extension:performer.extension:actor.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
260. Basic.extension:performer.extension:actor.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "actor"
}
<url value="actor"/>
262. Basic.extension:performer.extension:actor.value[x]
Definition

Who performed the intake.

ShortWho performed the intake
Control1..1
TypeReference(Cross-version Profile for R5.Practitioner for use in FHIR R4, Practitioner, Cross-version Profile for R5.PractitionerRole for use in FHIR R4, PractitionerRole, Cross-version Profile for R5.Organization for use in FHIR R4, Organization, Cross-version Profile for R5.CareTeam for use in FHIR R4, CareTeam, Cross-version Profile for R5.Patient for use in FHIR R4, Patient, Cross-version Profile for R5.Device for use in FHIR R4, Device, Cross-version Profile for R5.RelatedPerson for use in FHIR R4, RelatedPerson)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
264. Basic.extension:performer.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.performer"
}
<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.performer"/>
266. Basic.extension:performer.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..0
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
268. Basic.extension:location
Slice Namelocation
Definition

R5: NutritionIntake.location (new:Reference(Location))

ShortR5: Where the intake occurred (new)
Comments

Element NutritionIntake.location is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.location has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(R5: Where the intake occurred (new)) (Extension Type: Reference(Cross-version Profile for R5.Location for use in FHIR R4, Location))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
270. Basic.extension:derivedFrom
Slice NamederivedFrom
Definition

R5: NutritionIntake.derivedFrom (new:Reference(Resource))

ShortR5: Additional supporting information (new)
Comments

Element NutritionIntake.derivedFrom is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.derivedFrom has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Likely references would be to AllergyIntolerance, Observation or QuestionnaireAnswers.

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Additional supporting information (new)) (Extension Type: Reference(Cross-version Profile for R5.Resource for use in FHIR R4, Resource))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
272. Basic.extension:reason
Slice Namereason
Definition

R5: NutritionIntake.reason (new:CodeableReference(Condition,Observation,DiagnosticReport,DocumentReference))

ShortR5: Reason for why the food or fluid is /was consumed (new)
Comments

Element NutritionIntake.reason is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.reason has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Reason for why the food or fluid is /was consumed (new)) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
274. Basic.extension:reason.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
276. Basic.extension:reason.extension
Definition

An Extension

ShortExtension
Control1..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
278. Basic.extension:reason.extension:_datatype
Slice Name_datatype
Definition

Slice to indicate the presence of a R5 CodeableReference in FHIR R4

ShortDataType slice for a FHIR R5 `CodeableReference` value
Control1..1
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
280. Basic.extension:reason.extension:_datatype.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
282. Basic.extension:reason.extension:_datatype.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
284. Basic.extension:reason.extension:_datatype.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/StructureDefinition/_datatype"
}
<url value="http://hl7.org/fhir/StructureDefinition/_datatype"/>
286. Basic.extension:reason.extension:_datatype.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Comments

Must be: CodeableReference

Control1..1
Typestring
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Fixed Value
{
  "valueString" : "CodeableReference"
}
<valueString value="CodeableReference"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
288. Basic.extension:reason.extension:concept
Slice Nameconcept
Definition

R5: CodeableReference.concept

ShortR5: Reference to a concept (by class)
Comments

Element CodeableReference.concept is mapped to FHIR R4 element CodeableConcept as Equivalent.

Control0..1
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element CodeableReference.concept is mapped to FHIR R4 element CodeableConcept as Equivalent.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
290. Basic.extension:reason.extension:concept.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
292. Basic.extension:reason.extension:concept.extension
Definition

An Extension

ShortExtension
Control0..0
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
294. Basic.extension:reason.extension:concept.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "concept"
}
<url value="concept"/>
296. Basic.extension:reason.extension:concept.value[x]
Definition

A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology.

ShortReference to a concept (by class)
Control0..1
BindingFor example codes, see Condition/Problem/DiagnosisCodes
(example to http://hl7.org/fhir/ValueSet/condition-code)
TypeCodeableConcept
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
298. Basic.extension:reason.extension:reference
Slice Namereference
Definition

R5: CodeableReference.reference

ShortR5: Reference to a resource (by instance)
Comments

Element CodeableReference.reference is mapped to FHIR R4 element Reference as Equivalent.

Control0..1
TypeExtension
Is Modifierfalse
Summaryfalse
Requirements

Element CodeableReference.reference is mapped to FHIR R4 element Reference as Equivalent.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
300. Basic.extension:reason.extension:reference.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
302. Basic.extension:reason.extension:reference.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.extension.extension.extension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
304. Basic.extension:reason.extension:reference.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "reference"
}
<url value="reference"/>
306. Basic.extension:reason.extension:reference.value[x]
Definition

A reference to a resource the provides exact details about the information being referenced.

ShortReference to a resource (by instance)
Control0..1
TypeReference(Cross-version Profile for R5.Condition for use in FHIR R4, Condition, Cross-version Profile for R5.Observation for use in FHIR R4, Observation, Cross-version Profile for R5.DiagnosticReport for use in FHIR R4, DiagnosticReport, Cross-version Profile for R5.DocumentReference for use in FHIR R4, Media)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
308. Basic.extension:reason.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Value
{
  "url" : "http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.reason"
}
<url value="http://hl7.org/fhir/5.0/StructureDefinition/extension-NutritionIntake.reason"/>
310. Basic.extension:reason.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control0..0
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
312. Basic.extension:note
Slice Namenote
Definition

R5: NutritionIntake.note (new:Annotation)

ShortR5: Further information about the consumption (new)
Comments

Element NutritionIntake.note is not mapped to FHIR R4, since FHIR R5 NutritionIntake is not mapped. Element NutritionIntake.note has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Further information about the consumption (new)) (Extension Type: Annotation)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
314. Basic.modifierExtension
Definition

An Extension

ShortExtension
Control1..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Basic.modifierExtension. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
316. Basic.modifierExtension:status
Slice Namestatus
Definition

The status of a nutrition intake, using the required EventStatus binding from FHIR R5 NutritionIntake.status. Replaces the incompatible status binding in the R5-to-R4 cross-version package 0.1.0.

ShortPFE Nutrition Intake Status
Control1..1
This element is affected by the following invariants: ele-1
TypeExtension(PFE Nutrition Intake Status) (Extension Type: code)
Is Modifiertrue because The entered-in-error status means that the nutrition intake resource should not be treated as valid.
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
318. Basic.identifier
Definition

Identifier assigned to the resource for business purposes, outside the context of FHIR.

ShortBusiness identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
320. Basic.code
Definition

Identifies the 'type' of resource - equivalent to the resource name for other resources.

ShortKind of Resource
Comments

Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

This element is labeled as a modifier because it defines the meaning of the resource and cannot be ignored.

Control1..1
BindingFor example codes, see BasicResourceTypes
(example to http://hl7.org/fhir/ValueSet/basic-resource-type|4.0.1)

Codes for identifying types of resources not yet defined by FHIR.

TypeCodeableConcept
Is Modifiertrue because This element determines what kind of resource is being represented which drives the meaning of all of the other elements.
Summarytrue
Requirements

Must be able to distinguish different types of Basic resources.

Pattern Value
{
  "coding" : [
    {
      "system" : "http://hl7.org/fhir/fhir-types",
      "code" : "NutritionIntake"
    }
  ]
}
<code>
  <coding>
    <system value="http://hl7.org/fhir/fhir-types"/>
    <code value="NutritionIntake"/>
  </coding>
</code>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
322. Basic.subject
Definition

Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource.

ShortIdentifies the focus of this resource
Comments

Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension.

Control1..1
TypeReference(US Core Patient Profile)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Needed for partitioning the resource by Patient.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
324. Basic.created
Definition

Identifies when the resource was first created.

ShortWhen created
Control0..1
Typedate
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows ordering resource instances by time.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
326. Basic.author
Definition

Indicates who was responsible for creating the resource instance.

ShortWho created
Control0..1
TypeReference(Practitioner, PractitionerRole, Patient, RelatedPerson, Organization)
Is Modifierfalse
Summarytrue
Requirements

Needed for partitioning the resource.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))