FHIR Extensions Pack
5.2.0-ballot - 5.2.0 Ballot - September 2024) International flag

FHIR Extensions Pack, published by HL7 International / FHIR Infrastructure. This guide is not an authorized publication; it is the continuous build for version 5.2.0-ballot built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7/fhir-extensions/ and changes regularly. See the Directory of published versions

Extension: QRUnitValueSet - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 3

Definitions for the questionnaire-unitValueSet extension.

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition

A set of units that the user may choose when providing a quantity value.

ShortUnit choices
Comments

icon Changed:

Provide either unitOption(s) or unitValueSet. If either of the extensions are present, the units for a Quantity element are constrained to only the units listed by the extensions - i.e. it is treated as a "required", not an "extensible" binding. In the absence of either, any unit is valid. See additional guidance and examples in the SDC implementation guide. If this extension present and an answer is provided for the question item in the QuestionnaireResponse, then the valueQuantity SHALL have a Quantity.code and Quantity.system that match the Coding.code and system of one of the allowed values if the Coding has a code and/or system. If the Coding only has a display, then the Quantity.unit must match. (Note that Coding with only a display is strongly discouraged.) If there is a match on code and system, but no match on display/unit, systems MAY raise a warning. However, because of translation and bandwidth considerations, some systems MAY opt to drop the unit or express it in an alternate language. Validation of the Quantity unit MAY be performed by using the $validateCode operation, populating the elements passed into the operation from the Quantity.code, system and unit elements.

Control0..1
2. Extension.extension
Control0..0
4. Extension.url
Fixed Valuehttp://hl7.org/fhir/StructureDefinition/questionnaire-unitValueSet
6. Extension.value[x]
Control1..?
Typecanonical(ValueSet), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition

A set of units that the user may choose when providing a quantity value.


Optional Extension Element - found in all resources.

ShortUnit choicesOptional Extensions Element
Comments

Provide either unitOption(s) or unitValueSet. If either of the extensions are present, the units for a Quantity element are constrained to only the units listed by the extensions - i.e. it is treated as a "required", not an "extensible" binding. In the absence of either, any unit is valid. See additional guidance and examples in the SDC implementation guide. If this extension present and an answer is provided for the question item in the QuestionnaireResponse, then the valueQuantity SHALL have a Quantity.code and Quantity.system that match the Coding.code and system of one of the allowed values if the Coding has a code and/or system. If the Coding only has a display, then the Quantity.unit must match. (Note that Coding with only a display is strongly discouraged.) If there is a match on code and system, but no match on display/unit, systems MAY raise a warning. However, because of translation and bandwidth considerations, some systems MAY opt to drop the unit or express it in an alternate language. Validation of the Quantity unit MAY be performed by using the $validateCode operation, populating the elements passed into the operation from the Quantity.code, system and unit elements.

Control0..1*
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
    • 4. Extension.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    Fixed Valuehttp://hl7.org/fhir/StructureDefinition/questionnaire-unitValueSet
    6. Extension.value[x]
    Definition

    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

    ShortValue of extension
    Control10..1
    This element is affected by the following invariants: ext-1
    Typecanonical(ValueSet), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be found here

    0. Extension
    Definition

    A set of units that the user may choose when providing a quantity value.

    ShortUnit choices
    Comments

    icon Changed:

    Provide either unitOption(s) or unitValueSet. If either of the extensions are present, the units for a Quantity element are constrained to only the units listed by the extensions - i.e. it is treated as a "required", not an "extensible" binding. In the absence of either, any unit is valid. See additional guidance and examples in the SDC implementation guide. If this extension present and an answer is provided for the question item in the QuestionnaireResponse, then the valueQuantity SHALL have a Quantity.code and Quantity.system that match the Coding.code and system of one of the allowed values if the Coding has a code and/or system. If the Coding only has a display, then the Quantity.unit must match. (Note that Coding with only a display is strongly discouraged.) If there is a match on code and system, but no match on display/unit, systems MAY raise a warning. However, because of translation and bandwidth considerations, some systems MAY opt to drop the unit or express it in an alternate language. Validation of the Quantity unit MAY be performed by using the $validateCode operation, populating the elements passed into the operation from the Quantity.code, system and unit elements.

    Control0..1
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    2. Extension.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    This element is affected by the following invariants: ele-1
    Typeid
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    4. Extension.extension
    Definition

    An Extension

    ShortExtension
    Control0..0
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
      • 6. Extension.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      Fixed Valuehttp://hl7.org/fhir/StructureDefinition/questionnaire-unitValueSet
      8. Extension.value[x]
      Definition

      icon Changed:

      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

      ShortValue of extension
      Control1..1
      This element is affected by the following invariants: ext-1
      Typecanonical(ValueSet)
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))