FHIR Extensions Pack, published by HL7 International / FHIR Infrastructure. This guide is not an authorized publication; it is the continuous build for version 5.2.0-ballot built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7/fhir-extensions/ and changes regularly. See the Directory of published versions
Page standards status: Draft | Maturity Level: 1 |
Definitions for the dosage-minimumGapBetweenDose extension.
Guidance on how to interpret the contents of this table can be found here
0. Extension | |
Definition | The minimum amount of time that must pass between administering the specified dose amount. |
Short | Time that must pass between doses |
Comments | Used on orders with flexible timing, such as PRN medications or PCA devices when there is a need to prevent too much medication from being administered in too short a period of time. |
Control | 0..1 |
Alternate Names | lockout interval |
2. Extension.extension:meetGoal | |
Slice Name | meetGoal |
Definition | Follow the dosage instructions until the specified goal is met. |
Control | 0..* |
Type | Extension |
4. Extension.extension:meetGoal.extension | |
Control | Added:1..? |
6. Extension.extension:meetGoal.extension:offset | |
Slice Name | offset |
Definition | Specifies the offset before or after the goal is met to follow the instructions. |
Control | 0..1 |
Type | Extension |
8. Extension.extension:meetGoal.extension:offset.extension | |
Control | 0..0 |
10. Extension.extension:meetGoal.extension:offset.url | |
Type | uri |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Fixed Value | offset |
12. Extension.extension:meetGoal.extension:offset.value[x] | |
Control | 1..? |
Type | Duration |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
14. Extension.extension:meetGoal.extension:goal | |
Slice Name | goal |
Definition | The specific goal to meet to follow the dosage instructions. |
Control | 1..1 |
Type | Extension |
16. Extension.extension:meetGoal.extension:goal.extension | |
Control | 0..0 |
18. Extension.extension:meetGoal.extension:goal.url | |
Type | uri |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Fixed Value | goal |
20. Extension.extension:meetGoal.extension:goal.value[x] | |
Control | 1..? |
Type | Choice of: string, Reference(Goal) |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
22. Extension.extension:meetGoal.url | |
Type | uri |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Fixed Value | meetGoal |
24. Extension.extension:meetGoal.value[x] | |
Control | 0..0 |
26. Extension.extension:whenTrigger | |
Slice Name | whenTrigger |
Definition | A condition that causes the dosage instructions to be followed. |
Control | 0..* |
Type | Extension |
28. Extension.extension:whenTrigger.extension | |
Control | Added:1..? |
30. Extension.extension:whenTrigger.extension:offset | |
Slice Name | offset |
Definition | Specifies the offset before or after the trigger happens to follow the instructions. |
Control | 0..1 |
Type | Extension |
32. Extension.extension:whenTrigger.extension:offset.extension | |
Control | 0..0 |
34. Extension.extension:whenTrigger.extension:offset.url | |
Type | uri |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Fixed Value | offset |
36. Extension.extension:whenTrigger.extension:offset.value[x] | |
Control | 1..? |
Type | Duration |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
38. Extension.extension:whenTrigger.extension:trigger | |
Slice Name | trigger |
Definition | The event that causes the dosage instruction to be followed. |
Control | 1..1 |
Type | Extension |
40. Extension.extension:whenTrigger.extension:trigger.extension | |
Control | 0..0 |
42. Extension.extension:whenTrigger.extension:trigger.url | |
Type | uri |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Fixed Value | trigger |
44. Extension.extension:whenTrigger.extension:trigger.value[x] | |
Control | 1..? |
Type | Choice of: string, Reference(Procedure, ActivityDefinition, ObservationDefinition) |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
46. Extension.extension:whenTrigger.url | |
Type | uri |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Fixed Value | whenTrigger |
48. Extension.extension:whenTrigger.value[x] | |
Control | 0..0 |
50. Extension.extension:precondition | |
Slice Name | precondition |
Definition | A condition that must (or must not) be present for the dosage instructions to be followed. |
Control | 0..* |
Type | Extension |
52. Extension.extension:precondition.extension | |
Control | Added:1..? |
54. Extension.extension:precondition.extension:doesNotOccur | |
Slice Name | doesNotOccur |
Definition | If set to 'true', indicates that the condition must not be present for the dosage instructions to be followed. |
Control | 0..1 |
Type | Extension |
56. Extension.extension:precondition.extension:doesNotOccur.extension | |
Control | 0..0 |
58. Extension.extension:precondition.extension:doesNotOccur.url | |
Type | uri |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Fixed Value | doesNotOccur |
60. Extension.extension:precondition.extension:doesNotOccur.value[x] | |
Control | 1..? |
Type | boolean |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
62. Extension.extension:precondition.extension:condition | |
Slice Name | condition |
Definition | The event that causes the dosage instruction to be followed. |
Control | 1..1 |
Type | Extension |
64. Extension.extension:precondition.extension:condition.extension | |
Control | 0..0 |
66. Extension.extension:precondition.extension:condition.url | |
Type | uri |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Fixed Value | condition |
68. Extension.extension:precondition.extension:condition.value[x] | |
Control | 1..? |
Type | Reference(ActivityDefinition, ObservationDefinition) |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
70. Extension.extension:precondition.url | |
Type | uri |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Fixed Value | precondition |
72. Extension.extension:precondition.value[x] | |
Control | 0..0 |
74. Extension.url | |
Fixed Value | http://hl7.org/fhir/StructureDefinition/dosage-minimumGapBetweenDose |
76. Extension.value[x] | |
Control | 0..0 |
Guidance on how to interpret the contents of this table can be found here
0. Extension | |
Definition | The minimum amount of time that must pass between administering the specified dose amount. Optional Extension Element - found in all resources. |
Short | Time that must pass between dosesOptional Extensions Element |
Comments | Used on orders with flexible timing, such as PRN medications or PCA devices when there is a need to prevent too much medication from being administered in too short a period of time. |
Control | 0..1* |
Is Modifier | false |
Alternate Names | lockout interval |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
2. Extension.extension:meetGoal | |
Slice Name | meetGoal |
Definition | Follow the dosage instructions until the specified goal is met. |
Short | ExtensionAdditional content defined by implementations |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
4. Extension.extension:meetGoal.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 10..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
6. Extension.extension:meetGoal.extension:offset | |
Slice Name | offset |
Definition | Specifies the offset before or after the goal is met to follow the instructions. |
Short | ExtensionAdditional content defined by implementations |
Control | 0..1* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
8. Extension.extension:meetGoal.extension:offset.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
10. Extension.extension:meetGoal.extension:offset.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | offset |
12. Extension.extension:meetGoal.extension:offset.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 10..1 This element is affected by the following invariants: ext-1 |
Type | Duration, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
14. Extension.extension:meetGoal.extension:goal | |
Slice Name | goal |
Definition | The specific goal to meet to follow the dosage instructions. |
Short | ExtensionAdditional content defined by implementations |
Control | 10..1* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
16. Extension.extension:meetGoal.extension:goal.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
18. Extension.extension:meetGoal.extension:goal.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | goal |
20. Extension.extension:meetGoal.extension:goal.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 10..1 This element is affected by the following invariants: ext-1 |
Type | Choice of: string, Reference(Goal), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
22. Extension.extension:meetGoal.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | meetGoal |
24. Extension.extension:meetGoal.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..01 This element is affected by the following invariants: ext-1 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
26. Extension.extension:whenTrigger | |
Slice Name | whenTrigger |
Definition | A condition that causes the dosage instructions to be followed. |
Short | ExtensionAdditional content defined by implementations |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
28. Extension.extension:whenTrigger.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 10..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
30. Extension.extension:whenTrigger.extension:offset | |
Slice Name | offset |
Definition | Specifies the offset before or after the trigger happens to follow the instructions. |
Short | ExtensionAdditional content defined by implementations |
Control | 0..1* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
32. Extension.extension:whenTrigger.extension:offset.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
34. Extension.extension:whenTrigger.extension:offset.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | offset |
36. Extension.extension:whenTrigger.extension:offset.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 10..1 This element is affected by the following invariants: ext-1 |
Type | Duration, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
38. Extension.extension:whenTrigger.extension:trigger | |
Slice Name | trigger |
Definition | The event that causes the dosage instruction to be followed. |
Short | ExtensionAdditional content defined by implementations |
Control | 10..1* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
40. Extension.extension:whenTrigger.extension:trigger.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
42. Extension.extension:whenTrigger.extension:trigger.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | trigger |
44. Extension.extension:whenTrigger.extension:trigger.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 10..1 This element is affected by the following invariants: ext-1 |
Type | Choice of: string, Reference(Procedure, ActivityDefinition, ObservationDefinition), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
46. Extension.extension:whenTrigger.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | whenTrigger |
48. Extension.extension:whenTrigger.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..01 This element is affected by the following invariants: ext-1 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
50. Extension.extension:precondition | |
Slice Name | precondition |
Definition | A condition that must (or must not) be present for the dosage instructions to be followed. |
Short | ExtensionAdditional content defined by implementations |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
52. Extension.extension:precondition.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 10..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
54. Extension.extension:precondition.extension:doesNotOccur | |
Slice Name | doesNotOccur |
Definition | If set to 'true', indicates that the condition must not be present for the dosage instructions to be followed. |
Short | ExtensionAdditional content defined by implementations |
Control | 0..1* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
56. Extension.extension:precondition.extension:doesNotOccur.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
58. Extension.extension:precondition.extension:doesNotOccur.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | doesNotOccur |
60. Extension.extension:precondition.extension:doesNotOccur.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 10..1 This element is affected by the following invariants: ext-1 |
Type | boolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, CodeableReference, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
62. Extension.extension:precondition.extension:condition | |
Slice Name | condition |
Definition | The event that causes the dosage instruction to be followed. |
Short | ExtensionAdditional content defined by implementations |
Control | 10..1* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
64. Extension.extension:precondition.extension:condition.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
66. Extension.extension:precondition.extension:condition.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | condition |
68. Extension.extension:precondition.extension:condition.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 10..1 This element is affected by the following invariants: ext-1 |
Type | Reference(ActivityDefinition, ObservationDefinition), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
70. Extension.extension:precondition.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | precondition |
72. Extension.extension:precondition.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..01 This element is affected by the following invariants: ext-1 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
74. Extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | http://hl7.org/fhir/StructureDefinition/dosage-minimumGapBetweenDose |
76. Extension.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..01 This element is affected by the following invariants: ext-1 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
0. Extension | |
Definition | The minimum amount of time that must pass between administering the specified dose amount. |
Short | Time that must pass between doses |
Comments | Used on orders with flexible timing, such as PRN medications or PCA devices when there is a need to prevent too much medication from being administered in too short a period of time. |
Control | 0..1 |
Is Modifier | false |
Alternate Names | lockout interval |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
2. Extension.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
4. Extension.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | Additional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
6. Extension.extension:meetGoal | |
Slice Name | meetGoal |
Definition | Follow the dosage instructions until the specified goal is met. |
Short | Extension |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
8. Extension.extension:meetGoal.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
10. Extension.extension:meetGoal.extension | |
Definition | An Extension |
Short | Extension |
Control | 1..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
12. Extension.extension:meetGoal.extension:offset | |
Slice Name | offset |
Definition | Specifies the offset before or after the goal is met to follow the instructions. |
Short | Extension |
Control | 0..1 |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
14. Extension.extension:meetGoal.extension:offset.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
16. Extension.extension:meetGoal.extension:offset.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
18. Extension.extension:meetGoal.extension:offset.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | offset |
20. Extension.extension:meetGoal.extension:offset.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 1..1 This element is affected by the following invariants: ext-1 |
Type | Duration |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
22. Extension.extension:meetGoal.extension:goal | |
Slice Name | goal |
Definition | The specific goal to meet to follow the dosage instructions. |
Short | Extension |
Control | 1..1 |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
24. Extension.extension:meetGoal.extension:goal.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
26. Extension.extension:meetGoal.extension:goal.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
28. Extension.extension:meetGoal.extension:goal.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | goal |
30. Extension.extension:meetGoal.extension:goal.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 1..1 This element is affected by the following invariants: ext-1 |
Type | Choice of: string, Reference(Goal) |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
32. Extension.extension:meetGoal.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | meetGoal |
34. Extension.extension:meetGoal.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..0 This element is affected by the following invariants: ext-1 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
36. Extension.extension:whenTrigger | |
Slice Name | whenTrigger |
Definition | A condition that causes the dosage instructions to be followed. |
Short | Extension |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
38. Extension.extension:whenTrigger.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
40. Extension.extension:whenTrigger.extension | |
Definition | An Extension |
Short | Extension |
Control | 1..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
42. Extension.extension:whenTrigger.extension:offset | |
Slice Name | offset |
Definition | Specifies the offset before or after the trigger happens to follow the instructions. |
Short | Extension |
Control | 0..1 |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
44. Extension.extension:whenTrigger.extension:offset.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
46. Extension.extension:whenTrigger.extension:offset.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
48. Extension.extension:whenTrigger.extension:offset.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | offset |
50. Extension.extension:whenTrigger.extension:offset.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 1..1 This element is affected by the following invariants: ext-1 |
Type | Duration |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
52. Extension.extension:whenTrigger.extension:trigger | |
Slice Name | trigger |
Definition | The event that causes the dosage instruction to be followed. |
Short | Extension |
Control | 1..1 |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
54. Extension.extension:whenTrigger.extension:trigger.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
56. Extension.extension:whenTrigger.extension:trigger.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
58. Extension.extension:whenTrigger.extension:trigger.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | trigger |
60. Extension.extension:whenTrigger.extension:trigger.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 1..1 This element is affected by the following invariants: ext-1 |
Type | Choice of: string, Reference(Procedure, ActivityDefinition, ObservationDefinition) |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
62. Extension.extension:whenTrigger.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | whenTrigger |
64. Extension.extension:whenTrigger.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..0 This element is affected by the following invariants: ext-1 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
66. Extension.extension:precondition | |
Slice Name | precondition |
Definition | A condition that must (or must not) be present for the dosage instructions to be followed. |
Short | Extension |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
68. Extension.extension:precondition.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
70. Extension.extension:precondition.extension | |
Definition | An Extension |
Short | Extension |
Control | 1..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
72. Extension.extension:precondition.extension:doesNotOccur | |
Slice Name | doesNotOccur |
Definition | If set to 'true', indicates that the condition must not be present for the dosage instructions to be followed. |
Short | Extension |
Control | 0..1 |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
74. Extension.extension:precondition.extension:doesNotOccur.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
76. Extension.extension:precondition.extension:doesNotOccur.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
78. Extension.extension:precondition.extension:doesNotOccur.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | doesNotOccur |
80. Extension.extension:precondition.extension:doesNotOccur.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 1..1 This element is affected by the following invariants: ext-1 |
Type | boolean |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
82. Extension.extension:precondition.extension:condition | |
Slice Name | condition |
Definition | The event that causes the dosage instruction to be followed. |
Short | Extension |
Control | 1..1 |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
84. Extension.extension:precondition.extension:condition.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | id |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
86. Extension.extension:precondition.extension:condition.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 |
Type | Extension |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
88. Extension.extension:precondition.extension:condition.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | condition |
90. Extension.extension:precondition.extension:condition.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 1..1 This element is affected by the following invariants: ext-1 |
Type | Reference(ActivityDefinition, ObservationDefinition) |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
92. Extension.extension:precondition.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | precondition |
94. Extension.extension:precondition.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..0 This element is affected by the following invariants: ext-1 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
96. Extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | http://hl7.org/fhir/StructureDefinition/dosage-minimumGapBetweenDose |
98. Extension.value[x] | |
Definition | Changed: Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..0 This element is affected by the following invariants: ext-1 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |