National Healthcare Directory Query
1.0.0-ballot - ballot United States of America flag

National Healthcare Directory Query, published by HL7 International - Patient Administration Work Group. This is not an authorized publication; it is the continuous build for version 1.0.0-ballot). This version is based on the current content of https://github.com/HL7/fhir-directory-query/ and changes regularly. See the Directory of published versions

Resource Profile: NatlDirEndpointQryPractitionerRole - Detailed Descriptions

Active as of 2022-12-08

Definitions for the NatlDirEndpointQry-PractitionerRole resource profile.

Guidance on how to interpret the contents of this table can be found here.

1. PractitionerRole
InvariantsDefined on this element
practitioner-or-organization-or-healthcareservice-or-location: If NatlDirPractitionerRole.practitioner is absent ( NatlDirPractitionerRole.organization, NatlDirPractitionerRole.healthcareservice, NatlDirPractitionerRole.location) must be present (: practitioner.exists() or (organization.exists() or healthcareservice.exists() or location.exists()))
2. PractitionerRole.meta
Control0..?
3. PractitionerRole.meta.lastUpdated
Control1..?
4. PractitionerRole.extension
SlicingThis element introduces a set of slices on PractitionerRole.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
5. PractitionerRole.extension:rating
SliceNamerating
Control0..*
TypeExtension(Rating) (Complex Extension)
6. PractitionerRole.extension:newpatients
SliceNamenewpatients
Control0..*
TypeExtension(NewPatients) (Complex Extension)
7. PractitionerRole.extension:network-reference
SliceNamenetwork-reference
Control0..1
TypeExtension(NetworkReference) (Extension Type: Reference(NatlDirEndpointQryNetwork))
8. PractitionerRole.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Must Supporttrue
9. PractitionerRole.active
Control10..1
10. PractitionerRole.practitioner
Control10..1
TypeReference(NatlDirEndpointQryPractitioner|Practitioner)
Must Supporttrue
11. PractitionerRole.organization
Control10..1
TypeReference(NatlDirEndpointQryOrganization|Organization)
Must Supporttrue
12. PractitionerRole.code
BindingThe codes SHALL be taken from PractitionerRole Code Value SetFor example codes, see PractitionerRole
Must Supporttrue
13. PractitionerRole.specialty
BindingThe codes SHALL be taken from Individual and Group SpecialtiesThe codes SHOULD be taken from PracticeSettingCodeValueSet
Must Supporttrue
14. PractitionerRole.location
TypeReference(NatlDirEndpointQryLocation|Location)
Must Supporttrue
15. PractitionerRole.healthcareService
TypeReference(NatlDirEndpointQryHealthcareService|HealthcareService)
Must Supporttrue
16. PractitionerRole.telecom
Control0..?
17. PractitionerRole.telecom.extension:contactpoint-availabletime
SliceNamecontactpoint-availabletime
Control0..*
TypeExtension(ContactPointAvailableTime) (Complex Extension)
18. PractitionerRole.telecom.extension:via-intermediary
SliceNamevia-intermediary
Control0..*
TypeExtension(ViaIntermediary) (Extension Type: Reference(NatlDirEndpointQryPractitionerRole|NatlDirEndpointQryOrganizationAffiliation|NatlDirEndpointQryLocation|NatlDirEndpointQryOrganization))
19. PractitionerRole.telecom.system
Control1..?
20. PractitionerRole.telecom.value
Control1..?
21. PractitionerRole.endpoint
TypeReference(NatlDirEndpointQryEndpoint|Endpoint)
Must Supporttrue

Guidance on how to interpret the contents of this table can be found here.

1. PractitionerRole
Definition

A specific set of Roles/Locations/specialties/services that a practitioner may perform at an organization for a period of time.

Control0..*
InvariantsDefined on this element
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (: text.`div`.exists())
practitioner-or-organization-or-healthcareservice-or-location: If NatlDirPractitionerRole.practitioner is absent ( NatlDirPractitionerRole.organization, NatlDirPractitionerRole.healthcareservice, NatlDirPractitionerRole.location) must be present (: practitioner.exists() or (organization.exists() or healthcareservice.exists() or location.exists()))
2. PractitionerRole.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
3. PractitionerRole.extension
Definition

An Extension

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on PractitionerRole.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
4. PractitionerRole.extension:rating
SliceNamerating
Definition

Rating

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control This element is affected by the following invariants: ele-1
TypeExtension(Rating) (Complex Extension)
InvariantsDefined on this element
ele-1: (: )
ext-1: (: )
5. PractitionerRole.extension:newpatients
SliceNamenewpatients
Definition

New Patients indicates whether new patients are being accepted in general, or from a specific network.
This extension is included in the PractitionerRole, HealthcareService, and Location profiles.
This provides needed flexibility for specifying whether a provider accepts new patients by location and network.

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control This element is affected by the following invariants: ele-1
TypeExtension(NewPatients) (Complex Extension)
InvariantsDefined on this element
ele-1: (: )
ext-1: (: )
new-patients-characteristics: If no new patients are accepted, no characteristics are allowed (: extension('acceptingPatients').valueCodeableConcept.coding.exists(code = 'no') implies extension('characteristics').empty())
6. PractitionerRole.extension:network-reference
SliceNamenetwork-reference
Definition

A reference to the healthcare provider insurance networks (NatlDirEndpointQry-Network) the practitioner participates in through their role

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(NetworkReference) (Extension Type: Reference(NatlDirEndpointQryNetwork))
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
7. PractitionerRole.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
8. PractitionerRole.identifier
Definition

Business Identifiers that are specific to a role/location.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Must Supporttrue
Requirements

Often, specific identities are assigned for the agent.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
9. PractitionerRole.active
Definition

Whether this practitioner role record is in active use.

Control10..1
Typeboolean
Requirements

Need to be able to mark a practitioner role record as not to be used because it was created in error, or otherwise no longer in active use.

Comments

If this value is false, you may refer to the period to see when the role was in active use. If there is no period specified, no inference can be made about when it was active.

Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
10. PractitionerRole.practitioner
Definition

Practitioner that is able to provide the defined services for the organization.

Control10..1
TypeReference(NatlDirEndpointQryPractitioner|Practitioner)
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. PractitionerRole.organization
Definition

The organization where the Practitioner performs the roles associated.

Control10..1
TypeReference(NatlDirEndpointQryOrganization|Organization)
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. PractitionerRole.code
Definition

Roles which this practitioner is authorized to perform for the organization.

Control0..*
BindingThe codes SHALL be taken from PractitionerRole Code Value SetFor example codes, see PractitionerRole
TypeCodeableConcept
Must Supporttrue
Requirements

Need to know what authority the practitioner has - what can they do?

Comments

A person may have more than one role.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. PractitionerRole.specialty
Definition

Specific specialty of the practitioner.

Control0..*
BindingThe codes SHALL be taken from Individual and Group SpecialtiesThe codes SHOULD be taken from PracticeSettingCodeValueSet
TypeCodeableConcept
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. PractitionerRole.location
Definition

The location(s) at which this practitioner provides care.

Control0..*
TypeReference(NatlDirEndpointQryLocation|Location)
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
15. PractitionerRole.healthcareService
Definition

The list of healthcare services that this worker provides for this role's Organization/Location(s).

Control0..*
TypeReference(NatlDirEndpointQryHealthcareService|HealthcareService)
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
16. PractitionerRole.endpoint
Definition

Technical endpoints providing access to services operated for the practitioner with this role.

Control0..*
TypeReference(NatlDirEndpointQryEndpoint|Endpoint)
Must Supporttrue
Requirements

Organizations have multiple systems that provide various services and ,ay also be different for practitioners too.

So the endpoint satisfies the need to be able to define the technical connection details for how to connect to them, and for what purpose.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here.

1. PractitionerRole
Definition

A specific set of Roles/Locations/specialties/services that a practitioner may perform at an organization for a period of time.

Control0..*
2. PractitionerRole.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Control0..1
Typeid
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

3. PractitionerRole.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Control0..1
TypeMeta
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
4. PractitionerRole.meta.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
5. PractitionerRole.meta.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on PractitionerRole.meta.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
6. PractitionerRole.meta.versionId
Definition

The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

Control0..1
Typeid
Comments

The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. PractitionerRole.meta.lastUpdated
Definition

When the resource last changed - e.g. when the version changed.

Control1..1
Typeinstant
Comments

This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
8. PractitionerRole.meta.source
Definition

A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

Control0..1
Typeuri
Comments

In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
9. PractitionerRole.meta.profile
Definition

A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

Control0..*
Typecanonical(StructureDefinition)
Comments

It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
10. PractitionerRole.meta.security
Definition

Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

Control0..*
BindingThe codes SHALL be taken from All Security Labels; other codes may be used where these codes are not suitable Security Labels from the Healthcare Privacy and Security Classification System
TypeCoding
Comments

The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. PractitionerRole.meta.tag
Definition

Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

Control0..*
BindingFor example codes, see CommonTags Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones"
TypeCoding
Comments

The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. PractitionerRole.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. PractitionerRole.language
Definition

The base language in which the resource is written.

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages A human language
Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. PractitionerRole.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Control0..1
TypeNarrative
Alternate Namesnarrative, html, xhtml, display
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
15. PractitionerRole.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Control0..*
TypeResource
Alternate Namesinline resources, anonymous resources, contained resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

16. PractitionerRole.extension
Definition

An Extension

Control0..*
TypeExtension
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on PractitionerRole.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
17. PractitionerRole.extension:rating
SliceNamerating
Definition

Rating

Control0..* This element is affected by the following invariants: ele-1
TypeExtension(Rating) (Complex Extension)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
18. PractitionerRole.extension:newpatients
SliceNamenewpatients
Definition

New Patients indicates whether new patients are being accepted in general, or from a specific network.
This extension is included in the PractitionerRole, HealthcareService, and Location profiles.
This provides needed flexibility for specifying whether a provider accepts new patients by location and network.

Control0..* This element is affected by the following invariants: ele-1
TypeExtension(NewPatients) (Complex Extension)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
new-patients-characteristics: If no new patients are accepted, no characteristics are allowed (: extension('acceptingPatients').valueCodeableConcept.coding.exists(code = 'no') implies extension('characteristics').empty())
19. PractitionerRole.extension:network-reference
SliceNamenetwork-reference
Definition

A reference to the healthcare provider insurance networks (NatlDirEndpointQry-Network) the practitioner participates in through their role

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(NetworkReference) (Extension Type: Reference(NatlDirEndpointQryNetwork))
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
20. PractitionerRole.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
21. PractitionerRole.identifier
Definition

Business Identifiers that are specific to a role/location.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Must Supporttrue
Requirements

Often, specific identities are assigned for the agent.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
22. PractitionerRole.active
Definition

Whether this practitioner role record is in active use.

Control1..1
Typeboolean
Requirements

Need to be able to mark a practitioner role record as not to be used because it was created in error, or otherwise no longer in active use.

Comments

If this value is false, you may refer to the period to see when the role was in active use. If there is no period specified, no inference can be made about when it was active.

Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
23. PractitionerRole.period
Definition

The period during which the person is authorized to act as a practitioner in these role(s) for the organization.

Control0..1
TypePeriod
Requirements

Even after the agencies is revoked, the fact that it existed must still be recorded.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
24. PractitionerRole.practitioner
Definition

Practitioner that is able to provide the defined services for the organization.

Control1..1
TypeReference(NatlDirEndpointQryPractitioner)
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
25. PractitionerRole.organization
Definition

The organization where the Practitioner performs the roles associated.

Control1..1
TypeReference(NatlDirEndpointQryOrganization)
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
26. PractitionerRole.code
Definition

Roles which this practitioner is authorized to perform for the organization.

Control0..*
BindingThe codes SHALL be taken from PractitionerRole Code Value Set
TypeCodeableConcept
Must Supporttrue
Requirements

Need to know what authority the practitioner has - what can they do?

Comments

A person may have more than one role.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
27. PractitionerRole.specialty
Definition

Specific specialty of the practitioner.

Control0..*
BindingThe codes SHALL be taken from Individual and Group Specialties
TypeCodeableConcept
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
28. PractitionerRole.location
Definition

The location(s) at which this practitioner provides care.

Control0..*
TypeReference(NatlDirEndpointQryLocation)
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
29. PractitionerRole.healthcareService
Definition

The list of healthcare services that this worker provides for this role's Organization/Location(s).

Control0..*
TypeReference(NatlDirEndpointQryHealthcareService)
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
30. PractitionerRole.telecom
Definition

Contact details that are specific to the role/location/service.

Control0..*
TypeContactPoint
Requirements

Often practitioners have a dedicated line for each location (or service) that they work at, and need to be able to define separate contact details for each of these.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
31. PractitionerRole.telecom.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
32. PractitionerRole.telecom.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on PractitionerRole.telecom.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
33. PractitionerRole.telecom.extension:contactpoint-availabletime
SliceNamecontactpoint-availabletime
Definition

An extension representing the days and times a contact point is available

Control0..*
TypeExtension(ContactPointAvailableTime) (Complex Extension)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
34. PractitionerRole.telecom.extension:via-intermediary
SliceNamevia-intermediary
Definition

A reference to an alternative point of contact (NatlDirEndpointQry-PractitionerRole, NatlDirEndpointQry-Organization, NatlDirEndpointQry-OrganizationAffiliation, or NatlDirEndpointQry-Location) for this organization

Control0..*
TypeExtension(ViaIntermediary) (Extension Type: Reference(NatlDirEndpointQryPractitionerRole|NatlDirEndpointQryOrganizationAffiliation|NatlDirEndpointQryLocation|NatlDirEndpointQryOrganization))
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
35. PractitionerRole.telecom.system
Definition

Telecommunications form for contact point - what communications system is required to make use of the contact.

Control1..1 This element is affected by the following invariants: cpt-2
BindingThe codes SHALL be taken from ContactPointSystem Telecommunications form for contact point
Typecode
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
36. PractitionerRole.telecom.value
Definition

The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

Control1..1
Typestring
Requirements

Need to support legacy numbers that are not in a tightly controlled format.

Comments

Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
37. PractitionerRole.telecom.use
Definition

Identifies the purpose for the contact point.

Control0..1
BindingThe codes SHALL be taken from ContactPointUse Use of contact point
Typecode
Is Modifiertrue
Requirements

Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

Comments

Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
38. PractitionerRole.telecom.rank
Definition

Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

Control0..1
TypepositiveInt
Comments

Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
39. PractitionerRole.telecom.period
Definition

Time period when the contact point was/is in use.

Control0..1
TypePeriod
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
40. PractitionerRole.availableTime
Definition

A collection of times the practitioner is available or performing this role at the location and/or healthcareservice.

Control0..*
TypeBackboneElement
Comments

More detailed availability information may be provided in associated Schedule/Slot resources.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
41. PractitionerRole.availableTime.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
42. PractitionerRole.availableTime.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
43. PractitionerRole.availableTime.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
44. PractitionerRole.availableTime.daysOfWeek
Definition

Indicates which days of the week are available between the start and end Times.

Control0..*
BindingThe codes SHALL be taken from DaysOfWeek The days of the week
Typecode
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
45. PractitionerRole.availableTime.allDay
Definition

Is this always available? (hence times are irrelevant) e.g. 24 hour service.

Control0..1
Typeboolean
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
46. PractitionerRole.availableTime.availableStartTime
Definition

The opening time of day. Note: If the AllDay flag is set, then this time is ignored.

Control0..1
Typetime
Comments

The timezone is expected to be for where this HealthcareService is provided at.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
47. PractitionerRole.availableTime.availableEndTime
Definition

The closing time of day. Note: If the AllDay flag is set, then this time is ignored.

Control0..1
Typetime
Comments

The timezone is expected to be for where this HealthcareService is provided at.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
48. PractitionerRole.notAvailable
Definition

The practitioner is not available or performing this role during this period of time due to the provided reason.

Control0..*
TypeBackboneElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
49. PractitionerRole.notAvailable.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
50. PractitionerRole.notAvailable.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
51. PractitionerRole.notAvailable.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
52. PractitionerRole.notAvailable.description
Definition

The reason that can be presented to the user as to why this time is not available.

Control1..1
Typestring
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
53. PractitionerRole.notAvailable.during
Definition

Service is not available (seasonally or for a public holiday) from this date.

Control0..1
TypePeriod
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
54. PractitionerRole.availabilityExceptions
Definition

A description of site availability exceptions, e.g. public holiday availability. Succinctly describing all possible exceptions to normal site availability as details in the available Times and not available Times.

Control0..1
Typestring
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
55. PractitionerRole.endpoint
Definition

Technical endpoints providing access to services operated for the practitioner with this role.

Control0..*
TypeReference(NatlDirEndpointQryEndpoint)
Must Supporttrue
Requirements

Organizations have multiple systems that provide various services and ,ay also be different for practitioners too.

So the endpoint satisfies the need to be able to define the technical connection details for how to connect to them, and for what purpose.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))