Quality Measure Implementation Guide
1.0.1-cibuild - CI Build International flag

Quality Measure Implementation Guide, published by HL7 International / Clinical Quality Information. This guide is not an authorized publication; it is the continuous build for version 1.0.1-cibuild built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7/fhir-cqm/ and changes regularly. See the Directory of published versions

Extension: CQMValueSet - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 4

Definitions for the cqm-valueSet extension.

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition

A value set defining the set of possible values for stratum in this stratifier. If criteria and valueSet are both present, they SHALL be consistent (i.e. criteria expressions SHALL produce stratum values that are codes in the value set referenced by this element). Note that this MAY be strictly at the code level (e.g. an Age Range code that is just the string value 01Y--05Y with the system ignored).


Optional Extension Element - found in all resources.

ShortWhat stratum values?Optional Extensions Element
Comments

This element may be used to define a stratifier rather than requiring the stratifier be defined with logic. For example, a measure may reference a value set defining possible age ranges, rather than (and potentially in addition to) embedding the calculation of the age ranges into measure logic. See the MeasureStratifierAgeRangeExample value set for an example. If present, the value set SHALL be consistent with the criteria (i.e., the criteria, when evaluated, will result in values from the value set).

Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Valuehttp://hl7.org/fhir/uv/cqm/StructureDefinition/cqm-valueSet
4. Extension.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control10..1
Typecanonical, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Extension.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
    • 6. Extension.value[x]:valueCanonical
    Slice NamevalueCanonical
    Definition

    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

    ShortValue of extension
    Control10..1
    Typecanonical(ValueSet), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be foundhere

    0. Extension
    Definition

    A value set defining the set of possible values for stratum in this stratifier. If criteria and valueSet are both present, they SHALL be consistent (i.e. criteria expressions SHALL produce stratum values that are codes in the value set referenced by this element). Note that this MAY be strictly at the code level (e.g. an Age Range code that is just the string value 01Y--05Y with the system ignored).

    ShortWhat stratum values?
    Comments

    This element may be used to define a stratifier rather than requiring the stratifier be defined with logic. For example, a measure may reference a value set defining possible age ranges, rather than (and potentially in addition to) embedding the calculation of the age ranges into measure logic. See the MeasureStratifierAgeRangeExample value set for an example. If present, the value set SHALL be consistent with the criteria (i.e., the criteria, when evaluated, will result in values from the value set).

    2. Extension.url
    Fixed Valuehttp://hl7.org/fhir/uv/cqm/StructureDefinition/cqm-valueSet
    4. Extension.valueCanonical
    Control1..1
    Typecanonical(ValueSet)
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension

    Guidance on how to interpret the contents of this table can be foundhere

    0. Extension
    Definition

    A value set defining the set of possible values for stratum in this stratifier. If criteria and valueSet are both present, they SHALL be consistent (i.e. criteria expressions SHALL produce stratum values that are codes in the value set referenced by this element). Note that this MAY be strictly at the code level (e.g. an Age Range code that is just the string value 01Y--05Y with the system ignored).

    ShortWhat stratum values?
    Comments

    This element may be used to define a stratifier rather than requiring the stratifier be defined with logic. For example, a measure may reference a value set defining possible age ranges, rather than (and potentially in addition to) embedding the calculation of the age ranges into measure logic. See the MeasureStratifierAgeRangeExample value set for an example. If present, the value set SHALL be consistent with the criteria (i.e., the criteria, when evaluated, will result in values from the value set).

    Control0..*
    This element is affected by the following invariants: ele-1
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    2. Extension.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    4. Extension.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
      • 6. Extension.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      Fixed Valuehttp://hl7.org/fhir/uv/cqm/StructureDefinition/cqm-valueSet
      8. Extension.value[x]
      Definition

      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

      ShortValue of extension
      Control1..1
      Typecanonical
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Extension.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
      • type @ $this
        • 10. Extension.value[x]:valueCanonical
        Slice NamevalueCanonical
        Definition

        Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

        ShortValue of extension
        Control1..1
        Typecanonical(ValueSet)
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))