Evidence Based Medicine on FHIR Implementation Guide
2.0.0-ballot - ballot
Evidence Based Medicine on FHIR Implementation Guide
2.0.0-ballot - ballot
Evidence Based Medicine on FHIR Implementation Guide, published by HL7 International / Clinical Decision Support. This guide is not an authorized publication; it is the continuous build for version 2.0.0-ballot built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7/ebm/ and changes regularly. See the Directory of published versions
| Page standards status: Draft | Maturity Level: 1 |
Definitions for the evidence-variable-constraint extension.
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Limit on acceptability of data used to express values of the variable. |
| Short | Limit on acceptability of data value |
| 2. Extension.extension:conditional | |
| Slice Name | conditional |
| Control | 0..1 |
| 4. Extension.extension:conditional.extension | |
| Control | 0..0 |
| 6. Extension.extension:conditional.url | |
| Fixed Value | conditional |
| 8. Extension.extension:conditional.value[x] | |
| Definition | When this constraint applies. |
| Short | When this constraint applies |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 10. Extension.extension:minimumQuantity | |
| Slice Name | minimumQuantity |
| Control | 0..1 |
| 12. Extension.extension:minimumQuantity.extension | |
| Control | 0..0 |
| 14. Extension.extension:minimumQuantity.url | |
| Fixed Value | minimumQuantity |
| 16. Extension.extension:minimumQuantity.value[x] | |
| Definition | The lowest permissible value of the variable, used with variables that have a number-based datatype (with or without units). |
| Short | The lowest permissible value of the variable |
| Type | Quantity |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 18. Extension.extension:maximumQuantity | |
| Slice Name | maximumQuantity |
| Control | 0..1 |
| 20. Extension.extension:maximumQuantity.extension | |
| Control | 0..0 |
| 22. Extension.extension:maximumQuantity.url | |
| Fixed Value | maximumQuantity |
| 24. Extension.extension:maximumQuantity.value[x] | |
| Definition | The highest permissible value of the variable, used with variables that have a number-based datatype (with or without units). |
| Short | The highest permissible value of the variable |
| Type | Quantity |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 26. Extension.extension:earliestDateTime | |
| Slice Name | earliestDateTime |
| Control | 0..1 |
| 28. Extension.extension:earliestDateTime.extension | |
| Control | 0..0 |
| 30. Extension.extension:earliestDateTime.url | |
| Fixed Value | earliestDateTime |
| 32. Extension.extension:earliestDateTime.value[x] | |
| Definition | The earliest permissible value of the variable, used with variables that have a date/time-based datatype. |
| Short | The earliest permissible value of the variable |
| Type | dateTime |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 34. Extension.extension:latestDateTime | |
| Slice Name | latestDateTime |
| Control | 0..1 |
| 36. Extension.extension:latestDateTime.extension | |
| Control | 0..0 |
| 38. Extension.extension:latestDateTime.url | |
| Fixed Value | latestDateTime |
| 40. Extension.extension:latestDateTime.value[x] | |
| Definition | The latest permissible value of the variable, used with variables that have a date/time-based datatype. |
| Short | The latest permissible value of the variable |
| Type | dateTime |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 42. Extension.extension:minimumStringLength | |
| Slice Name | minimumStringLength |
| Control | 0..1 |
| 44. Extension.extension:minimumStringLength.extension | |
| Control | 0..0 |
| 46. Extension.extension:minimumStringLength.url | |
| Fixed Value | minimumStringLength |
| 48. Extension.extension:minimumStringLength.value[x] | |
| Definition | The lowest number of characters allowed for a value of the variable, used with variables that have a string-based datatype. |
| Short | The lowest number of characters allowed for a value of the variable |
| Type | integer |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 50. Extension.extension:maximumStringLength | |
| Slice Name | maximumStringLength |
| Control | 0..1 |
| 52. Extension.extension:maximumStringLength.extension | |
| Control | 0..0 |
| 54. Extension.extension:maximumStringLength.url | |
| Fixed Value | maximumStringLength |
| 56. Extension.extension:maximumStringLength.value[x] | |
| Definition | The highest number of characters allowed for a value of the variable, used with variables that have a string-based datatype. |
| Short | The highest number of characters allowed for a value of the variable |
| Type | positiveInt |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 58. Extension.extension:code | |
| Slice Name | code |
| Control | 0..1 |
| 60. Extension.extension:code.extension | |
| Control | 0..0 |
| 62. Extension.extension:code.url | |
| Fixed Value | code |
| 64. Extension.extension:code.value[x] | |
| Definition | A rule, such as a format or other expectation, for the data values. |
| Short | Rule for acceptable data values |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 66. Extension.extension:expression | |
| Slice Name | expression |
| Control | 0..1 |
| 68. Extension.extension:expression.extension | |
| Control | 0..0 |
| 70. Extension.extension:expression.url | |
| Fixed Value | expression |
| 72. Extension.extension:expression.value[x] | |
| Definition | A rule, such as a format or other expectation, for the data values, expressed as an Expression. |
| Short | Rule for acceptable data values, as an Expression |
| Type | Expression |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 74. Extension.extension:expectedValueSet | |
| Slice Name | expectedValueSet |
| Control | 0..1 |
| 76. Extension.extension:expectedValueSet.extension | |
| Control | 0..0 |
| 78. Extension.extension:expectedValueSet.url | |
| Fixed Value | expectedValueSet |
| 80. Extension.extension:expectedValueSet.value[x] | |
| Definition | List of anticipated values used to express value of the variable, used with variables that have a codeable concept-based datatype. |
| Short | List of anticipated values used to express value of the variable |
| Type | Reference(ValueSet) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 82. Extension.extension:expectedUnitsValueSet | |
| Slice Name | expectedUnitsValueSet |
| Control | 0..1 |
| 84. Extension.extension:expectedUnitsValueSet.extension | |
| Control | 0..0 |
| 86. Extension.extension:expectedUnitsValueSet.url | |
| Fixed Value | expectedUnitsValueSet |
| 88. Extension.extension:expectedUnitsValueSet.value[x] | |
| Definition | List of anticipated values used to express units for the value of the variable, used with variables that have a Quantity-based datatype. |
| Short | List of anticipated values used to express units for the value of the variable |
| Type | Reference(ValueSet) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 90. Extension.extension:anyValueAllowed | |
| Slice Name | anyValueAllowed |
| Control | 0..1 |
| 92. Extension.extension:anyValueAllowed.extension | |
| Control | 0..0 |
| 94. Extension.extension:anyValueAllowed.url | |
| Fixed Value | anyValueAllowed |
| 96. Extension.extension:anyValueAllowed.value[x] | |
| Definition | Whether the value expressed for a variable is allowed to not be restricted to the expected value set. |
| Short | Permissibility of unanticipated value used to express value of the variable |
| Type | boolean |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 98. Extension.url | |
| Fixed Value | http://hl7.org/fhir/uv/ebm/StructureDefinition/evidence-variable-constraint |
| 100. Extension.value[x] | |
| Control | 0..0 |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Limit on acceptability of data used to express values of the variable. Optional Extension Element - found in all resources. |
| Short | Limit on acceptability of data valueOptional Extensions Element |
| Control | 0..* |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.extension:conditional | |
| Slice Name | conditional |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 4. Extension.extension:conditional.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.extension:conditional.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | conditional |
| 8. Extension.extension:conditional.value[x] | |
| Definition | When this constraint applies. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | When this constraint appliesValue of extension |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 10. Extension.extension:minimumQuantity | |
| Slice Name | minimumQuantity |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 12. Extension.extension:minimumQuantity.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 14. Extension.extension:minimumQuantity.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | minimumQuantity |
| 16. Extension.extension:minimumQuantity.value[x] | |
| Definition | The lowest permissible value of the variable, used with variables that have a number-based datatype (with or without units). Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The lowest permissible value of the variableValue of extension |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | Quantity, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 18. Extension.extension:maximumQuantity | |
| Slice Name | maximumQuantity |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 20. Extension.extension:maximumQuantity.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 22. Extension.extension:maximumQuantity.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | maximumQuantity |
| 24. Extension.extension:maximumQuantity.value[x] | |
| Definition | The highest permissible value of the variable, used with variables that have a number-based datatype (with or without units). Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The highest permissible value of the variableValue of extension |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | Quantity, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Extension.extension:earliestDateTime | |
| Slice Name | earliestDateTime |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 28. Extension.extension:earliestDateTime.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 30. Extension.extension:earliestDateTime.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | earliestDateTime |
| 32. Extension.extension:earliestDateTime.value[x] | |
| Definition | The earliest permissible value of the variable, used with variables that have a date/time-based datatype. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The earliest permissible value of the variableValue of extension |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | dateTime, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 34. Extension.extension:latestDateTime | |
| Slice Name | latestDateTime |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 36. Extension.extension:latestDateTime.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 38. Extension.extension:latestDateTime.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | latestDateTime |
| 40. Extension.extension:latestDateTime.value[x] | |
| Definition | The latest permissible value of the variable, used with variables that have a date/time-based datatype. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The latest permissible value of the variableValue of extension |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | dateTime, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 42. Extension.extension:minimumStringLength | |
| Slice Name | minimumStringLength |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 44. Extension.extension:minimumStringLength.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 46. Extension.extension:minimumStringLength.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | minimumStringLength |
| 48. Extension.extension:minimumStringLength.value[x] | |
| Definition | The lowest number of characters allowed for a value of the variable, used with variables that have a string-based datatype. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The lowest number of characters allowed for a value of the variableValue of extension |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | integer, date, Meta, Address, Attachment, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 50. Extension.extension:maximumStringLength | |
| Slice Name | maximumStringLength |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 52. Extension.extension:maximumStringLength.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 54. Extension.extension:maximumStringLength.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | maximumStringLength |
| 56. Extension.extension:maximumStringLength.value[x] | |
| Definition | The highest number of characters allowed for a value of the variable, used with variables that have a string-based datatype. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The highest number of characters allowed for a value of the variableValue of extension |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | positiveInt, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 58. Extension.extension:code | |
| Slice Name | code |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 60. Extension.extension:code.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 62. Extension.extension:code.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | code |
| 64. Extension.extension:code.value[x] | |
| Definition | A rule, such as a format or other expectation, for the data values. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Rule for acceptable data valuesValue of extension |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 66. Extension.extension:expression | |
| Slice Name | expression |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 68. Extension.extension:expression.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 70. Extension.extension:expression.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | expression |
| 72. Extension.extension:expression.value[x] | |
| Definition | A rule, such as a format or other expectation, for the data values, expressed as an Expression. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Rule for acceptable data values, as an ExpressionValue of extension |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | Expression, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 74. Extension.extension:expectedValueSet | |
| Slice Name | expectedValueSet |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 76. Extension.extension:expectedValueSet.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 78. Extension.extension:expectedValueSet.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | expectedValueSet |
| 80. Extension.extension:expectedValueSet.value[x] | |
| Definition | List of anticipated values used to express value of the variable, used with variables that have a codeable concept-based datatype. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | List of anticipated values used to express value of the variableValue of extension |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | Reference(ValueSet), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 82. Extension.extension:expectedUnitsValueSet | |
| Slice Name | expectedUnitsValueSet |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 84. Extension.extension:expectedUnitsValueSet.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 86. Extension.extension:expectedUnitsValueSet.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | expectedUnitsValueSet |
| 88. Extension.extension:expectedUnitsValueSet.value[x] | |
| Definition | List of anticipated values used to express units for the value of the variable, used with variables that have a Quantity-based datatype. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | List of anticipated values used to express units for the value of the variableValue of extension |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | Reference(ValueSet), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 90. Extension.extension:anyValueAllowed | |
| Slice Name | anyValueAllowed |
| Definition | An Extension |
| Short | ExtensionAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 92. Extension.extension:anyValueAllowed.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 94. Extension.extension:anyValueAllowed.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | anyValueAllowed |
| 96. Extension.extension:anyValueAllowed.value[x] | |
| Definition | Whether the value expressed for a variable is allowed to not be restricted to the expected value set. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Permissibility of unanticipated value used to express value of the variableValue of extension |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | boolean, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Availability, integer64, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ExtendedContactDetail, CodeableConcept, ParameterDefinition, dateTime, code, string, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, Expression, CodeableReference, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 98. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/uv/ebm/StructureDefinition/evidence-variable-constraint |
| 100. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..01 This element is affected by the following invariants: ext-1 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
| 0. Extension | |
| Definition | Limit on acceptability of data used to express values of the variable. |
| Short | Limit on acceptability of data value |
| Control | 0..* |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Extension.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and managable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.extension:conditional | |
| Slice Name | conditional |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 8. Extension.extension:conditional.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 10. Extension.extension:conditional.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Extension.extension:conditional.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | conditional |
| 14. Extension.extension:conditional.value[x] | |
| Definition | When this constraint applies. |
| Short | When this constraint applies |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Extension.extension:minimumQuantity | |
| Slice Name | minimumQuantity |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 18. Extension.extension:minimumQuantity.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 20. Extension.extension:minimumQuantity.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 22. Extension.extension:minimumQuantity.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | minimumQuantity |
| 24. Extension.extension:minimumQuantity.value[x] | |
| Definition | The lowest permissible value of the variable, used with variables that have a number-based datatype (with or without units). |
| Short | The lowest permissible value of the variable |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | Quantity |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Extension.extension:maximumQuantity | |
| Slice Name | maximumQuantity |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 28. Extension.extension:maximumQuantity.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 30. Extension.extension:maximumQuantity.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 32. Extension.extension:maximumQuantity.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | maximumQuantity |
| 34. Extension.extension:maximumQuantity.value[x] | |
| Definition | The highest permissible value of the variable, used with variables that have a number-based datatype (with or without units). |
| Short | The highest permissible value of the variable |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | Quantity |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 36. Extension.extension:earliestDateTime | |
| Slice Name | earliestDateTime |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 38. Extension.extension:earliestDateTime.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 40. Extension.extension:earliestDateTime.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 42. Extension.extension:earliestDateTime.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | earliestDateTime |
| 44. Extension.extension:earliestDateTime.value[x] | |
| Definition | The earliest permissible value of the variable, used with variables that have a date/time-based datatype. |
| Short | The earliest permissible value of the variable |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | dateTime |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 46. Extension.extension:latestDateTime | |
| Slice Name | latestDateTime |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 48. Extension.extension:latestDateTime.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 50. Extension.extension:latestDateTime.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 52. Extension.extension:latestDateTime.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | latestDateTime |
| 54. Extension.extension:latestDateTime.value[x] | |
| Definition | The latest permissible value of the variable, used with variables that have a date/time-based datatype. |
| Short | The latest permissible value of the variable |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | dateTime |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 56. Extension.extension:minimumStringLength | |
| Slice Name | minimumStringLength |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 58. Extension.extension:minimumStringLength.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 60. Extension.extension:minimumStringLength.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 62. Extension.extension:minimumStringLength.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | minimumStringLength |
| 64. Extension.extension:minimumStringLength.value[x] | |
| Definition | The lowest number of characters allowed for a value of the variable, used with variables that have a string-based datatype. |
| Short | The lowest number of characters allowed for a value of the variable |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | integer |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 66. Extension.extension:maximumStringLength | |
| Slice Name | maximumStringLength |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 68. Extension.extension:maximumStringLength.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 70. Extension.extension:maximumStringLength.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 72. Extension.extension:maximumStringLength.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | maximumStringLength |
| 74. Extension.extension:maximumStringLength.value[x] | |
| Definition | The highest number of characters allowed for a value of the variable, used with variables that have a string-based datatype. |
| Short | The highest number of characters allowed for a value of the variable |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | positiveInt |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 76. Extension.extension:code | |
| Slice Name | code |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 78. Extension.extension:code.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 80. Extension.extension:code.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 82. Extension.extension:code.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | code |
| 84. Extension.extension:code.value[x] | |
| Definition | A rule, such as a format or other expectation, for the data values. |
| Short | Rule for acceptable data values |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 86. Extension.extension:expression | |
| Slice Name | expression |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 88. Extension.extension:expression.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 90. Extension.extension:expression.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 92. Extension.extension:expression.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | expression |
| 94. Extension.extension:expression.value[x] | |
| Definition | A rule, such as a format or other expectation, for the data values, expressed as an Expression. |
| Short | Rule for acceptable data values, as an Expression |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | Expression |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 96. Extension.extension:expectedValueSet | |
| Slice Name | expectedValueSet |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 98. Extension.extension:expectedValueSet.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 100. Extension.extension:expectedValueSet.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 102. Extension.extension:expectedValueSet.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | expectedValueSet |
| 104. Extension.extension:expectedValueSet.value[x] | |
| Definition | List of anticipated values used to express value of the variable, used with variables that have a codeable concept-based datatype. |
| Short | List of anticipated values used to express value of the variable |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | Reference(ValueSet) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 106. Extension.extension:expectedUnitsValueSet | |
| Slice Name | expectedUnitsValueSet |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 108. Extension.extension:expectedUnitsValueSet.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 110. Extension.extension:expectedUnitsValueSet.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 112. Extension.extension:expectedUnitsValueSet.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | expectedUnitsValueSet |
| 114. Extension.extension:expectedUnitsValueSet.value[x] | |
| Definition | List of anticipated values used to express units for the value of the variable, used with variables that have a Quantity-based datatype. |
| Short | List of anticipated values used to express units for the value of the variable |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | Reference(ValueSet) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 116. Extension.extension:anyValueAllowed | |
| Slice Name | anyValueAllowed |
| Definition | An Extension |
| Short | Extension |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 118. Extension.extension:anyValueAllowed.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 This element is affected by the following invariants: ele-1 |
| Type | id |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 120. Extension.extension:anyValueAllowed.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 122. Extension.extension:anyValueAllowed.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | anyValueAllowed |
| 124. Extension.extension:anyValueAllowed.value[x] | |
| Definition | Whether the value expressed for a variable is allowed to not be restricted to the expected value set. |
| Short | Permissibility of unanticipated value used to express value of the variable |
| Control | 0..1 This element is affected by the following invariants: ext-1 |
| Type | boolean |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 126. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/uv/ebm/StructureDefinition/evidence-variable-constraint |
| 128. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..0 This element is affected by the following invariants: ext-1 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, integer64, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Availability, ExtendedContactDetail, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
IG © 2024+ HL7 International / Clinical Decision Support. Package hl7.fhir.uv.ebm#2.0.0-ballot based on FHIR 6.0.0-ballot2. Generated 2024-11-21
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change