Da Vinci - Documentation Templates and Rules
2.2.0 - STU 2.2 United States of America flag

Da Vinci - Documentation Templates and Rules, published by HL7 International / Clinical Decision Support. This guide is not an authorized publication; it is the continuous build for version 2.2.0 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7/davinci-dtr/ and changes regularly. See the Directory of published versions

Resource Profile: DTR Questionnaire Package Input Parameters - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 2

Definitions for the dtr-qpackage-input-parameters resource profile

See the documentation on how to interpret the contents of this table

0. Parameters
Definition

This resource is a non-persisted resource used to pass information into and back from an operation. It has no other use, and there is no RESTful endpoint associated with it.

ShortOperation Request or Response
Comments

The parameters that may be used are defined by the OperationDefinition resource.

Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdtr-1: At least one of 'order', 'questionnaire' and 'context' SHALL be present (parameter.exists(name='order' or name='questionnaire' or name='context'))
2. Parameters.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Parameters.parameter
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control10..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
SlicingThis element introduces a set of slices on Parameters.parameter. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • pattern @ name

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

6. Parameters.parameter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Parameters.parameter.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Parameters.parameter:coverage
Slice Namecoverage
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
12. Parameters.parameter:coverage.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Parameters.parameter:coverage.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Pattern Value
{
  "name" : "coverage"
}
<name value="coverage"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Parameters.parameter:coverage.resource
Definition

This profile specifies constraints on the Coverage resource to support coverage requirements discovery.


If the parameter is a whole resource.

ShortInsurance or medical plan or a payment agreementIf parameter is a whole resource
Comments

The Coverage resource contains the insurance card level information, which is customary to provide on claims and other communications between providers and insurers.


When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control10..1
This element is affected by the following invariants: inv-1
TypeCoverageResource(CRD Coverage Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
Is Modifierfalse
Must Supporttrue
Summaryfalse
18. Parameters.parameter:order
Slice Nameorder
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
20. Parameters.parameter:order.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. Parameters.parameter:order.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Pattern Value
{
  "name" : "order"
}
<name value="order"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Parameters.parameter:order.resource
Definition

A booking of a healthcare event among patient(s), practitioner(s), related person(s) and/or device(s) for a specific date/time. This may result in one or more Encounter(s).


If the parameter is a whole resource.

ShortOne or more Order resource instances, e.g., DeviceRequest, ServiceRequest, MedicationRequest, ... Encounter, Appointment, or prior-auth Claim, etc.If parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control10..1
This element is affected by the following invariants: inv-1
TypeChoice of: Appointment(CRD Base Appointment The constraints on the root of this type profile have not been applied to this element in the snapshot. Check the type profile directly as well), Encounter(CRD Encounter The constraints on the root of this type profile have not been applied to this element in the snapshot. Check the type profile directly as well), CommunicationRequest(CRD Communication Request The constraints on the root of this type profile have not been applied to this element in the snapshot. Check the type profile directly as well), DeviceRequest(CRD Device Request The constraints on the root of this type profile have not been applied to this element in the snapshot. Check the type profile directly as well), MedicationRequest(CRD Medication Request The constraints on the root of this type profile have not been applied to this element in the snapshot. Check the type profile directly as well), NutritionOrder(CRD Nutrition Order The constraints on the root of this type profile have not been applied to this element in the snapshot. Check the type profile directly as well), ServiceRequest(CRD Service Request The constraints on the root of this type profile have not been applied to this element in the snapshot. Check the type profile directly as well), SupplyRequest, VisionPrescription(CRD Vision Prescription The constraints on the root of this type profile have not been applied to this element in the snapshot. Check the type profile directly as well), Resource
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
26. Parameters.parameter:questionnaire
Slice Namequestionnaire
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
28. Parameters.parameter:questionnaire.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
30. Parameters.parameter:questionnaire.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Pattern Value
{
  "name" : "questionnaire"
}
<name value="questionnaire"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Parameters.parameter:questionnaire.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typecanonical(DTR Base Questionnaire), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Parameters.parameter:context
Slice Namecontext
Definition

A parameter passed to or received from the operation.

ShortCRD, CDex, or PAS-provided contextOperation Parameter
Control0..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
36. Parameters.parameter:context.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
38. Parameters.parameter:context.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Pattern Value
{
  "name" : "context"
}
<name value="context"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Parameters.parameter:context.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typestring, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Parameters.parameter:changedsince
Slice Namechangedsince
Definition

A parameter passed to or received from the operation.

ShortWhen the Questionnaire package was last retrievedOperation Parameter
Control0..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
44. Parameters.parameter:changedsince.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. Parameters.parameter:changedsince.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Pattern Value
{
  "name" : "changedsince"
}
<name value="changedsince"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Parameters.parameter:changedsince.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeinstant, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

See the documentation on how to interpret the contents of this table

0. Parameters
Invariantsdtr-1: At least one of 'order', 'questionnaire' and 'context' SHALL be present (parameter.exists(name='order' or name='questionnaire' or name='context'))
2. Parameters.parameter
Control1..?
Must Supporttrue
SlicingThis element introduces a set of slices on Parameters.parameter. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • pattern @ name

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

4. Parameters.parameter:coverage
Slice Namecoverage
Control1..1
Must Supporttrue
6. Parameters.parameter:coverage.name
Pattern Value
{
  "name" : "coverage"
}
<name value="coverage"/>
8. Parameters.parameter:coverage.resource
Control1..?
TypeCoverage(CRD Coverage)
Must Supporttrue
10. Parameters.parameter:order
Slice Nameorder
Control0..*
Must Supporttrue
12. Parameters.parameter:order.name
Pattern Value
{
  "name" : "order"
}
<name value="order"/>
14. Parameters.parameter:order.resource
ShortOne or more Order resource instances, e.g., DeviceRequest, ServiceRequest, MedicationRequest, ... Encounter, Appointment, or prior-auth Claim, etc.
Control1..?
TypeChoice of: Appointment(CRD Base Appointment), Encounter(CRD Encounter), CommunicationRequest(CRD Communication Request), DeviceRequest(CRD Device Request), MedicationRequest(CRD Medication Request), NutritionOrder(CRD Nutrition Order), ServiceRequest(CRD Service Request), SupplyRequest, VisionPrescription(CRD Vision Prescription)
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
16. Parameters.parameter:questionnaire
Slice Namequestionnaire
Control0..*
Must Supporttrue
18. Parameters.parameter:questionnaire.name
Pattern Value
{
  "name" : "questionnaire"
}
<name value="questionnaire"/>
20. Parameters.parameter:questionnaire.value[x]
Control1..?
Typecanonical(DTR Base Questionnaire)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
22. Parameters.parameter:context
Slice Namecontext
ShortCRD, CDex, or PAS-provided context
Control0..1
Must Supporttrue
24. Parameters.parameter:context.name
Pattern Value
{
  "name" : "context"
}
<name value="context"/>
26. Parameters.parameter:context.value[x]
Control1..?
Typestring
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
28. Parameters.parameter:changedsince
Slice Namechangedsince
ShortWhen the Questionnaire package was last retrieved
Control0..1
Must Supporttrue
30. Parameters.parameter:changedsince.name
Pattern Value
{
  "name" : "changedsince"
}
<name value="changedsince"/>
32. Parameters.parameter:changedsince.value[x]
Control1..?
Typeinstant
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue

See the documentation on how to interpret the contents of this table

0. Parameters
Definition

This resource is a non-persisted resource used to pass information into and back from an operation. It has no other use, and there is no RESTful endpoint associated with it.

ShortOperation Request or Response
Comments

The parameters that may be used are defined by the OperationDefinition resource.

Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdtr-1: At least one of 'order', 'questionnaire' and 'context' SHALL be present (parameter.exists(name='order' or name='questionnaire' or name='context'))
2. Parameters.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. Parameters.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Parameters.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Parameters.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Parameters.parameter
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control1..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
SlicingThis element introduces a set of slices on Parameters.parameter. The slices are Unordered and Open, and can be differentiated using the following discriminators:
  • pattern @ name

Slicing Note: The rules on this element (including its children) apply to all the slices, but are not repeated in them

12. Parameters.parameter.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
14. Parameters.parameter.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Parameters.parameter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Parameters.parameter.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Parameters.parameter.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control0..1
This element is affected by the following invariants: inv-1
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Parameters.parameter.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
24. Parameters.parameter.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Parameters.parameter:coverage
Slice Namecoverage
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control1..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
28. Parameters.parameter:coverage.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
30. Parameters.parameter:coverage.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
32. Parameters.parameter:coverage.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
34. Parameters.parameter:coverage.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Pattern Value
{
  "name" : "coverage"
}
<name value="coverage"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Parameters.parameter:coverage.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control0..1
This element is affected by the following invariants: inv-1
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Parameters.parameter:coverage.resource
Definition

This profile specifies constraints on the Coverage resource to support coverage requirements discovery.

ShortInsurance or medical plan or a payment agreement
Comments

The Coverage resource contains the insurance card level information, which is customary to provide on claims and other communications between providers and insurers.

Control1..1
TypeCoverage(CRD Coverage Only some of the constraints on the root of this type profile have been applied to this element in the snapshot. Check the type profile directly as well)
Is Modifierfalse
Must Supporttrue
Summaryfalse
40. Parameters.parameter:coverage.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Parameters.parameter:order
Slice Nameorder
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
44. Parameters.parameter:order.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
46. Parameters.parameter:order.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
48. Parameters.parameter:order.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
50. Parameters.parameter:order.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Pattern Value
{
  "name" : "order"
}
<name value="order"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Parameters.parameter:order.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control0..1
This element is affected by the following invariants: inv-1
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Parameters.parameter:order.resource
Definition

A booking of a healthcare event among patient(s), practitioner(s), related person(s) and/or device(s) for a specific date/time. This may result in one or more Encounter(s).

ShortOne or more Order resource instances, e.g., DeviceRequest, ServiceRequest, MedicationRequest, ... Encounter, Appointment, or prior-auth Claim, etc.
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control1..1
This element is affected by the following invariants: inv-1
TypeChoice of: Appointment(CRD Base Appointment The constraints on the root of this type profile have not been applied to this element in the snapshot. Check the type profile directly as well), Encounter(CRD Encounter The constraints on the root of this type profile have not been applied to this element in the snapshot. Check the type profile directly as well), CommunicationRequest(CRD Communication Request The constraints on the root of this type profile have not been applied to this element in the snapshot. Check the type profile directly as well), DeviceRequest(CRD Device Request The constraints on the root of this type profile have not been applied to this element in the snapshot. Check the type profile directly as well), MedicationRequest(CRD Medication Request The constraints on the root of this type profile have not been applied to this element in the snapshot. Check the type profile directly as well), NutritionOrder(CRD Nutrition Order The constraints on the root of this type profile have not been applied to this element in the snapshot. Check the type profile directly as well), ServiceRequest(CRD Service Request The constraints on the root of this type profile have not been applied to this element in the snapshot. Check the type profile directly as well), SupplyRequest, VisionPrescription(CRD Vision Prescription The constraints on the root of this type profile have not been applied to this element in the snapshot. Check the type profile directly as well)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
56. Parameters.parameter:order.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. Parameters.parameter:questionnaire
Slice Namequestionnaire
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
60. Parameters.parameter:questionnaire.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
62. Parameters.parameter:questionnaire.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
64. Parameters.parameter:questionnaire.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
66. Parameters.parameter:questionnaire.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Pattern Value
{
  "name" : "questionnaire"
}
<name value="questionnaire"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Parameters.parameter:questionnaire.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typecanonical(DTR Base Questionnaire)
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Parameters.parameter:questionnaire.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
72. Parameters.parameter:questionnaire.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Parameters.parameter:context
Slice Namecontext
Definition

A parameter passed to or received from the operation.

ShortCRD, CDex, or PAS-provided context
Control0..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
76. Parameters.parameter:context.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
78. Parameters.parameter:context.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
80. Parameters.parameter:context.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
82. Parameters.parameter:context.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Pattern Value
{
  "name" : "context"
}
<name value="context"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. Parameters.parameter:context.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typestring
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. Parameters.parameter:context.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
88. Parameters.parameter:context.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. Parameters.parameter:changedsince
Slice Namechangedsince
Definition

A parameter passed to or received from the operation.

ShortWhen the Questionnaire package was last retrieved
Control0..1
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
92. Parameters.parameter:changedsince.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
94. Parameters.parameter:changedsince.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
96. Parameters.parameter:changedsince.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
98. Parameters.parameter:changedsince.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Pattern Value
{
  "name" : "changedsince"
}
<name value="changedsince"/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. Parameters.parameter:changedsince.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeinstant
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. Parameters.parameter:changedsince.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
104. Parameters.parameter:changedsince.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSeettp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))