HL7 Terminology (THO)
5.4.5 - Continuous Process Integration (ci build) International flag

HL7 Terminology (THO), published by HL7 International - Vocabulary Work Group. This guide is not an authorized publication; it is the continuous build for version 5.4.5 built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7/UTG/ and changes regularly. See the Directory of published versions

ValueSet: ActPharmacySupplyType

Official URL: http://terminology.hl7.org/ValueSet/v3-ActPharmacySupplyType Version: 3.0.0
Active as of 2014-03-26 Responsible: Health Level Seven International Computable Name: ActPharmacySupplyType
Other Identifiers: urn:ietf:rfc:3986#Uniform Resource Identifier (URI)#urn:oid:2.16.840.1.113883.1.11.16208

Copyright/Legal: This material derives from the HL7 Terminology THO. THO is copyright ©1989+ Health Level Seven International and is made available under the CC0 designation. For more licensing information see: https://terminology.hl7.org/license

Identifies types of dispensing events

References

Logical Definition (CLD)

This value set includes codes based on the following rules:

This value set excludes codes based on the following rules:

 

Expansion

Expansion based on codesystem ActCode v9.0.0 (CodeSystem)

This value set contains 26 concepts.

CodeSystemDisplayInactiveDefinition
  DFhttp://terminology.hl7.org/CodeSystem/v3-ActCodeDaily Fill

A fill providing sufficient supply for one day

  EMhttp://terminology.hl7.org/CodeSystem/v3-ActCodeEmergency Supply

A supply action where there is no 'valid' order for the supplied medication. E.g. Emergency vacation supply, weekend supply (when prescriber is unavailable to provide a renewal prescription)

  SOhttp://terminology.hl7.org/CodeSystem/v3-ActCodeScript Owing

An emergency supply where the expectation is that a formal order authorizing the supply will be provided at a later date.

  FFhttp://terminology.hl7.org/CodeSystem/v3-ActCodeFirst Fill

The initial fill against an order. (This includes initial fills against refill orders.)

  FFShttp://terminology.hl7.org/CodeSystem/v3-ActCodefee for serviceinactive

A billing arrangement where a Provider charges a separate fee for each intervention/procedure/event or product.

Fee for Service is used when an individual intervention/procedure/event is used for billing purposes. In other words, fees are associated with the intervention/procedure/event. For example, a specific CCI (Canadian Classification of Interventions) code has an associated fee and is used for billing purposes.

  FFPShttp://terminology.hl7.org/CodeSystem/v3-ActCodefirst fill, part fill, partial strength

A first fill where the quantity supplied is less than one full repetition of the ordered amount. (e.g. If the order was 90 tablets, 3 refills, a partial fill might be for only 30 tablets.) and also where the strength supplied is less than the ordered strength (e.g. 10mg for an order of 50mg where a subsequent fill will dispense 40mg tablets)

  FFCShttp://terminology.hl7.org/CodeSystem/v3-ActCodefirst fill complete, partial strength

A first fill where the quantity supplied is equal to one full repetition of the ordered amount. (e.g. If the order was 90 tablets, 3 refills, a complete fill would be for the full 90 tablets) and also where the strength supplied is less than the ordered strength (e.g. 10mg for an order of 50mg where a subsequent fill will dispense 40mg tablets).

  TFShttp://terminology.hl7.org/CodeSystem/v3-ActCodetrial fill partial strength

A fill where a small portion is provided to allow for determination of the therapy effectiveness and patient tolerance and also where the strength supplied is less than the ordered strength (e.g. 10mg for an order of 50mg where a subsequent fill will dispense 40mg tablets).

  FFChttp://terminology.hl7.org/CodeSystem/v3-ActCodeFirst Fill - Complete

A first fill where the quantity supplied is equal to one full repetition of the ordered amount. (e.g. If the order was 90 tablets, 3 refills, a complete fill would be for the full 90 tablets).

  FFPhttp://terminology.hl7.org/CodeSystem/v3-ActCodeFirst Fill - Part Fill

A first fill where the quantity supplied is less than one full repetition of the ordered amount. (e.g. If the order was 90 tablets, 3 refills, a partial fill might be for only 30 tablets.)

  FFSShttp://terminology.hl7.org/CodeSystem/v3-ActCodefirst fill, partial strength

A first fill where the strength supplied is less than the ordered strength. (e.g. 10mg for an order of 50mg where a subsequent fill will dispense 40mg tablets).

  TFhttp://terminology.hl7.org/CodeSystem/v3-ActCodeTrial Fill

A fill where a small portion is provided to allow for determination of the therapy effectiveness and patient tolerance.

  FShttp://terminology.hl7.org/CodeSystem/v3-ActCodeFloor stock

A supply action to restock a smaller more local dispensary.

  MShttp://terminology.hl7.org/CodeSystem/v3-ActCodeManufacturer Sample

A supply of a manufacturer sample

  RFhttp://terminology.hl7.org/CodeSystem/v3-ActCodeRefill

A fill against an order that has already been filled (or partially filled) at least once.

  UDhttp://terminology.hl7.org/CodeSystem/v3-ActCodeUnit Dose

A supply action that provides sufficient material for a single dose.

  RFChttp://terminology.hl7.org/CodeSystem/v3-ActCodeRefill - Complete

A refill where the quantity supplied is equal to one full repetition of the ordered amount. (e.g. If the order was 90 tablets, 3 refills, a complete fill would be for the full 90 tablets.)

  RFCShttp://terminology.hl7.org/CodeSystem/v3-ActCoderefill complete partial strength

A refill where the quantity supplied is equal to one full repetition of the ordered amount. (e.g. If the order was 90 tablets, 3 refills, a complete fill would be for the full 90 tablets.) and where the strength supplied is less than the ordered strength (e.g. 10mg for an order of 50mg where a subsequent fill will dispense 40mg tablets).

  RFFhttp://terminology.hl7.org/CodeSystem/v3-ActCodeRefill (First fill this facility)

The first fill against an order that has already been filled at least once at another facility.

  RFFShttp://terminology.hl7.org/CodeSystem/v3-ActCoderefill partial strength (first fill this facility)

The first fill against an order that has already been filled at least once at another facility and where the strength supplied is less than the ordered strength (e.g. 10mg for an order of 50mg where a subsequent fill will dispense 40mg tablets).

  RFPhttp://terminology.hl7.org/CodeSystem/v3-ActCodeRefill - Part Fill

A refill where the quantity supplied is less than one full repetition of the ordered amount. (e.g. If the order was 90 tablets, 3 refills, a partial fill might be for only 30 tablets.)

  RFPShttp://terminology.hl7.org/CodeSystem/v3-ActCoderefill part fill partial strength

A refill where the quantity supplied is less than one full repetition of the ordered amount. (e.g. If the order was 90 tablets, 3 refills, a partial fill might be for only 30 tablets.) and where the strength supplied is less than the ordered strength (e.g. 10mg for an order of 50mg where a subsequent fill will dispense 40mg tablets).

  RFShttp://terminology.hl7.org/CodeSystem/v3-ActCoderefill partial strength

A fill against an order that has already been filled (or partially filled) at least once and where the strength supplied is less than the ordered strength (e.g. 10mg for an order of 50mg where a subsequent fill will dispense 40mg tablets).

  TBhttp://terminology.hl7.org/CodeSystem/v3-ActCodeTrial Balance

A fill where the remainder of a 'complete' fill is provided after a trial fill has been provided.

  TBShttp://terminology.hl7.org/CodeSystem/v3-ActCodetrial balance partial strength

A fill where the remainder of a 'complete' fill is provided after a trial fill has been provided and where the strength supplied is less than the ordered strength (e.g. 10mg for an order of 50mg where a subsequent fill will dispense 40mg tablets).

  UDEhttp://terminology.hl7.org/CodeSystem/v3-ActCodeunit dose equivalent

A supply action that provides sufficient material for a single dose via multiple products. E.g. 2 50mg tablets for a 100mg unit dose.


Explanation of the columns that may appear on this page:

Level A few code lists that FHIR defines are hierarchical - each code is assigned a level. In this scheme, some codes are under other codes, and imply that the code they are under also applies
System The source of the definition of the code (when the value set draws in codes defined elsewhere)
Code The code (used as the code in the resource instance)
Display The display (used in the display element of a Coding). If there is no display, implementers should not simply display the code, but map the concept into their application
Definition An explanation of the meaning of the concept
Comments Additional notes about how to use the code

History

DateActionAuthorCustodianComment
2023-11-14reviseMarc DuteauTSMGAdd standard copyright and contact to internal content; up-476
2022-10-18reviseMarc DuteauTSMGFixing missing metadata; up-349
2020-05-06reviseTed KleinVocabulary WGMigrated to the UTG maintenance environment and publishing tooling.
2014-03-26reviseVocabulary (Woody Beeler) (no record of original request)2014T1_2014-03-26_001283 (RIM release ID)Lock all vaue sets untouched since 2014-03-26 to trackingId 2014T1_2014_03_26