Consolidated CDA Release 2.2, published by Health Level Seven. This is not an authorized publication; it is the continuous build for version 2.2). This version is based on the current content of https://github.com/HL7/CDA-ccda-2.2/ and changes regularly. See the Directory of published versions
Active as of 2022-05-13 |
Definitions for the 2.16.840.1.113883.10.20.6.2.5 resource profile.
1. Act | |
Control | 1..1 |
Invariants | Defined on this element 81-9199: Procedure Context SHALL be represented with the procedure or act elements depending on the nature of the procedure (CONF:81-9199). (: ) |
2. Act.classCode | |
Control | 1..1 |
Type | code |
Requirements | SHALL contain exactly one [1..1] @classCode="ACT" (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6) (CONF:81-26452). |
Pattern Value | ACT |
3. Act.moodCode | |
Control | 1..1 |
Type | code |
Requirements | SHALL contain exactly one [1..1] @moodCode="EVN" (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001) (CONF:81-26453). |
Pattern Value | EVN |
4. Act.realmCode | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
5. Act.typeId | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/II |
6. Act.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/II |
Slicing | This element introduces a set of slices on Act.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
7. Act.templateId:primary | |
SliceName | primary |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/II |
Requirements | SHALL contain exactly one [1..1] templateId (CONF:81-9200) such that it |
8. Act.templateId:primary.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from NullFlavor |
Type | code |
9. Act.templateId:primary.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string |
10. Act.templateId:primary.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean |
11. Act.templateId:primary.root | |
Definition | A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier. |
Control | 1..1 |
Type | string |
Requirements | SHALL contain exactly one [1..1] @root="2.16.840.1.113883.10.20.6.2.5" (CONF:81-10530). |
Pattern Value | 2.16.840.1.113883.10.20.6.2.5 |
12. Act.templateId:primary.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 0..1 |
Type | string |
13. Act.id | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/II |
14. Act.code | |
Control | 1..1 |
Binding | The codes SHALL be taken from v3 Code System ActCode; other codes may be used where these codes are not suitable |
Type | http://hl7.org/fhir/cda/StructureDefinition/CD |
Requirements | SHALL contain exactly one [1..1] code (CONF:81-9201). |
15. Act.negationInd | |
Control | 0..1 |
Type | boolean |
16. Act.text | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ED |
17. Act.statusCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from ActStatus |
Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
18. Act.effectiveTime | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/IVL-TS |
Requirements | SHOULD contain zero or one [0..1] effectiveTime (CONF:81-9203). |
19. Act.effectiveTime.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from NullFlavor |
Type | code |
20. Act.effectiveTime.value | |
Definition | A quantity specifying a point on the axis of natural time. A point in time is most often represented as a calendar expression. |
Control | 1..1 |
Type | dateTime |
Requirements | The effectiveTime, if present, SHALL contain exactly one [1..1] @value (CONF:81-17173). |
21. Act.effectiveTime.inclusive | |
Definition | Specifies whether the limit is included in the interval (interval is closed) or excluded from the interval (interval is open). |
Control | 0..1 |
Type | boolean |
22. Act.effectiveTime.operator | |
Definition | A code specifying whether the set component is included (union) or excluded (set-difference) from the set, or other set operations with the current set component and the set as constructed from the representation stream up to the current point. |
Control | 0..1 |
Type | code |
23. Act.effectiveTime.low | |
Definition | This is the low limit of the interval. |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/TS |
24. Act.effectiveTime.high | |
Definition | This is the high limit of the interval. |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/TS |
25. Act.effectiveTime.width | |
Definition | The difference between high and low boundary. The purpose of distinguishing a width property is to handle all cases of incomplete information symmetrically. In any interval representation only two of the three properties high, low, and width need to be stated and the third can be derived. |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/PQ |
26. Act.effectiveTime.center | |
Definition | The arithmetic mean of the interval (low plus high divided by 2). The purpose of distinguishing the center as a semantic property is for conversions of intervals from and to point values. |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/TS |
27. Act.priorityCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from ActPriority; other codes may be used where these codes are not suitable |
Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
28. Act.languageCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from HumanLanguage |
Type | http://hl7.org/fhir/cda/StructureDefinition/CS |
29. Act.subject | |
Control | 0..1 |
Type | Element |
30. Act.subject.typeCode | |
Control | 1..1 |
Binding | The codes SHALL be taken from ParticipationTargetSubject |
Type | code |
Default Value | SBJ |
Fixed Value | SBJ |
31. Act.subject.contextControlCode | |
Control | 1..1 |
Binding | The codes SHALL be taken from ContextControl |
Type | code |
Default Value | OP |
Fixed Value | OP |
32. Act.subject.awarenessCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from TargetAwareness; other codes may be used where these codes are not suitable |
Type | http://hl7.org/fhir/cda/StructureDefinition/CE |
33. Act.subject.relatedSubject | |
Control | 1..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RelatedSubject |
34. Act.specimen | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/Specimen |
35. Act.performer | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/Performer2 |
36. Act.author | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/Author |
37. Act.informant | |
Control | 0..* |
Type | Element |
38. Act.informant.typeCode | |
Control | 1..1 |
Binding | The codes SHALL be taken from ParticipationInformationGenerator |
Type | code |
Default Value | INF |
Fixed Value | INF |
39. Act.informant.contextControlCode | |
Control | 1..1 |
Binding | The codes SHALL be taken from ContextControl |
Type | code |
Default Value | OP |
Fixed Value | OP |
40. Act.informant.assignedEntity | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/AssignedEntity |
41. Act.informant.relatedEntity | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RelatedEntity |
42. Act.participant | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/Participant2 |
43. Act.entryRelationship | |
Control | 0..* |
Type | Element |
Invariants | Defined on this element act-er-1: Only one of observation, regionOfInterest, observationMedia, substanceAdministration, supply, procedure, encounter, organizer, and act (: (observation | regionOfInterest | observationMedia | substanceAdministration | supply | procedure | encounter | organizer | act).count() = 1) |
44. Act.entryRelationship.typeCode | |
Control | 1..1 |
Type | code |
45. Act.entryRelationship.inversionInd | |
Control | 0..1 |
Type | boolean |
46. Act.entryRelationship.contextConductionInd | |
Control | 1..1 |
Type | boolean |
Default Value | true |
47. Act.entryRelationship.sequenceNumber | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/INT |
48. Act.entryRelationship.negationInd | |
Control | 0..1 |
Type | boolean |
49. Act.entryRelationship.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
50. Act.entryRelationship.observation | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Observation |
51. Act.entryRelationship.regionOfInterest | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/RegionOfInterest |
52. Act.entryRelationship.observationMedia | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ObservationMedia |
53. Act.entryRelationship.substanceAdministration | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/SubstanceAdministration |
54. Act.entryRelationship.supply | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Supply |
55. Act.entryRelationship.procedure | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Procedure |
56. Act.entryRelationship.encounter | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Encounter |
57. Act.entryRelationship.organizer | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Organizer |
58. Act.entryRelationship.act | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/Act |
59. Act.reference | |
Control | 0..* |
Type | Element |
60. Act.reference.typeCode | |
Control | 1..1 |
Type | code |
61. Act.reference.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/BL |
62. Act.reference.externalAct | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalAct |
63. Act.reference.externalObservation | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalObservation |
64. Act.reference.externalProcedure | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalProcedure |
65. Act.reference.externalDocument | |
Control | 0..1 |
Type | http://hl7.org/fhir/cda/StructureDefinition/ExternalDocument |
66. Act.precondition | |
Control | 0..* |
Type | http://hl7.org/fhir/cda/StructureDefinition/Precondition |