CH EMED EPR
2.0.0-ci-build - ci-build Switzerland flag

CH EMED EPR, published by CARA. This guide is not an authorized publication; it is the continuous build for version 2.0.0-ci-build built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/CARA-ch/ch-emed-epr/ and changes regularly. See the Directory of published versions

Data Type Profile: CHEMEDEPRRatioAmountPerTime - Detailed Descriptions

Draft as of 2024-12-20

Definitions for the ch-emed-epr-ratio-amount-per-time data type profile.

Guidance on how to interpret the contents of this table can be found here

0. Ratio
2. Ratio.id
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standard StatusDraft (from Draft)
4. Ratio.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standard StatusDraft (from Draft)
6. Ratio.numerator
TypeQuantity(Amount Quantity)
8. Ratio.denominator
TypeQuantity(Time Quantity)

Guidance on how to interpret the contents of this table can be found here

0. Ratio
Definition

A relationship of two Quantity values - expressed as a numerator and a denominator.

ShortA ratio of two Quantity values - a numerator and a denominator
Comments

The Ratio datatype should only be used to express a relationship of two numbers if the relationship cannot be suitably expressed using a Quantity and a common unit. Where the denominator value is known to be fixed to "1", Quantity should be used instead of Ratio.

Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
rat-1: Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present ((numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists()))
rat-1: Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present ((numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists()))
2. Ratio.id
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short✕ This element is not supportedUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Standard StatusDraft (from Normative)
Summaryfalse
4. Ratio.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short✕ This element is not supportedAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Standard StatusDraft (from Normative)
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Ratio.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. Ratio.numerator
    Definition

    The comparator is not used on a SimpleQuantity


    The value of the numerator.

    ShortA fixed quantity (no comparator)Numerator value
    Comments

    The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.

    Control10..1
    This element is affected by the following invariants: ele-1
    TypeQuantity(Amount Quantity)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    qty-3: If a code for the unit is present, the system SHALL also be present (code.empty() or system.exists())
    sqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())
    8. Ratio.denominator
    Definition

    The comparator is not used on a SimpleQuantity


    The value of the denominator.

    ShortA fixed quantity (no comparator)Denominator value
    Comments

    The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.

    Control10..1
    This element is affected by the following invariants: ele-1
    TypeQuantity(Time Quantity)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    qty-3: If a code for the unit is present, the system SHALL also be present (code.empty() or system.exists())
    sqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())

    Guidance on how to interpret the contents of this table can be found here

    0. Ratio
    Definition

    A relationship of two Quantity values - expressed as a numerator and a denominator.

    ShortA ratio of two Quantity values - a numerator and a denominator
    Comments

    The Ratio datatype should only be used to express a relationship of two numbers if the relationship cannot be suitably expressed using a Quantity and a common unit. Where the denominator value is known to be fixed to "1", Quantity should be used instead of Ratio.

    Control0..*
    This element is affected by the following invariants: ele-1
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    rat-1: Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present ((numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists()))
    2. Ratio.id
    Definition

    Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

    Short✕ This element is not supported
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Standard StatusDraft (from Normative)
    Summaryfalse
    4. Ratio.extension
    Definition

    Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

    Short✕ This element is not supported
    Control0..*
    TypeExtension
    Is Modifierfalse
    Standard StatusDraft (from Normative)
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Ratio.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 6. Ratio.numerator
      Definition

      The comparator is not used on a SimpleQuantity

      ShortA fixed quantity (no comparator)
      Comments

      The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.

      Control1..1
      This element is affected by the following invariants: ele-1
      TypeQuantity(Amount Quantity)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      qty-3: If a code for the unit is present, the system SHALL also be present (code.empty() or system.exists())
      sqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())
      8. Ratio.denominator
      Definition

      The comparator is not used on a SimpleQuantity

      ShortA fixed quantity (no comparator)
      Comments

      The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.

      Control1..1
      This element is affected by the following invariants: ele-1
      TypeQuantity(Time Quantity)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      qty-3: If a code for the unit is present, the system SHALL also be present (code.empty() or system.exists())
      sqty-1: The comparator is not used on a SimpleQuantity (comparator.empty())