CH EPR mHealth (R4)
4.0.0-ci-build - DSTU3 Switzerland flag

CH EPR mHealth (R4), published by eHealth Suisse. This guide is not an authorized publication; it is the continuous build for version 4.0.0-ci-build built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/ehealthsuisse/ch-epr-mhealth/ and changes regularly. See the Directory of published versions

Resource Profile: PIXm_IN_Parameters_CH - Detailed Descriptions

Draft as of 2020-10-29

Definitions for the ch-pixm-in-parameters resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Parameters
2. Parameters.parameter
SlicingThis element introduces a set of slices on Parameters.parameter. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ name
4. Parameters.parameter:sourceIdentifier
Slice NamesourceIdentifier
ShortsourceIdentifier
Control1..1
6. Parameters.parameter:sourceIdentifier.name
Fixed ValuesourceIdentifier
8. Parameters.parameter:sourceIdentifier.valueIdentifier
Control1..?
TypeIdentifier
10. Parameters.parameter:sourceIdentifier.valueIdentifier.system
Control1..?
12. Parameters.parameter:sourceIdentifier.valueIdentifier.value
Control1..?
14. Parameters.parameter:targetSystem
Slice NametargetSystem
ShorttargetSystem
Control2..2
16. Parameters.parameter:targetSystem.name
Fixed ValuetargetSystem
18. Parameters.parameter:targetSystem.valueUri
Control1..?
Typeuri
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension

Guidance on how to interpret the contents of this table can be found here

0. Parameters
Definition

This resource is a non-persisted resource used to pass information into and back from an operation. It has no other use, and there is no RESTful endpoint associated with it.

ShortOperation Request or Response
Comments

The parameters that may be used are defined by the OperationDefinition resource.

Control0..*
Is Modifierfalse
Summaryfalse
2. Parameters.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Parameters.parameter
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control10..*
TypeBackboneElement
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
SlicingThis element introduces a set of slices on Parameters.parameter. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ name
6. Parameters.parameter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Parameters.parameter.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Parameters.parameter:sourceIdentifier
Slice NamesourceIdentifier
Definition

A parameter passed to or received from the operation.

ShortsourceIdentifierOperation Parameter
Control10..1*
TypeBackboneElement
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
12. Parameters.parameter:sourceIdentifier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Parameters.parameter:sourceIdentifier.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Fixed ValuesourceIdentifier
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Parameters.parameter:sourceIdentifier.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
TypeIdentifier, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Parameters.parameter.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
18. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier
Slice NamevalueIdentifier
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
TypeIdentifier, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1
Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.system
Definition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control10..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Example<br/><b>General</b>:123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Parameters.parameter:targetSystem
Slice NametargetSystem
Definition

A parameter passed to or received from the operation.

ShorttargetSystemOperation Parameter
Control20..2*
TypeBackboneElement
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
28. Parameters.parameter:targetSystem.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
30. Parameters.parameter:targetSystem.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Fixed ValuetargetSystem
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Parameters.parameter:targetSystem.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control0..1
This element is affected by the following invariants: inv-1
Typeuri, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Parameters.parameter.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
34. Parameters.parameter:targetSystem.value[x]:valueUri
Slice NamevalueUri
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control10..1
This element is affected by the following invariants: inv-1
Typeuri, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Parameters
Definition

This resource is a non-persisted resource used to pass information into and back from an operation. It has no other use, and there is no RESTful endpoint associated with it.

ShortOperation Request or Response
Comments

The parameters that may be used are defined by the OperationDefinition resource.

Control0..*
Is Modifierfalse
Summaryfalse
2. Parameters.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. Parameters.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Parameters.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Parameters.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Parameters.parameter
Definition

A parameter passed to or received from the operation.

ShortOperation Parameter
Control1..*
TypeBackboneElement
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
SlicingThis element introduces a set of slices on Parameters.parameter. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ name
12. Parameters.parameter.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
14. Parameters.parameter.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Parameters.parameter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Parameters.parameter.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Parameters.parameter.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control0..1
This element is affected by the following invariants: inv-1
TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Parameters.parameter.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
24. Parameters.parameter.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Parameters.parameter:sourceIdentifier
Slice NamesourceIdentifier
Definition

A parameter passed to or received from the operation.

ShortsourceIdentifier
Control1..1
TypeBackboneElement
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
28. Parameters.parameter:sourceIdentifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
30. Parameters.parameter:sourceIdentifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
32. Parameters.parameter:sourceIdentifier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
34. Parameters.parameter:sourceIdentifier.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Fixed ValuesourceIdentifier
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Parameters.parameter:sourceIdentifier.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
TypeIdentifier
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Parameters.parameter.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
38. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier
Slice NamevalueIdentifier
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
TypeIdentifier
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
42. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Parameters.parameter.value[x].extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
44. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUse
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1
Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.type
Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

ShortDescription of identifier
Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Control0..1
BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
(extensible to http://hl7.org/fhir/ValueSet/identifier-type
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.system
Definition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control1..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Example<br/><b>General</b>:123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.period
Definition

Time period during which identifier is/was valid for use.

ShortTime period when id is/was valid for use
Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Parameters.parameter:sourceIdentifier.value[x]:valueIdentifier.assigner
Definition

Organization that issued/manages the identifier.

ShortOrganization that issued id (may be just text)
Comments

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Control0..1
TypeReference(Organization)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Parameters.parameter:sourceIdentifier.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
58. Parameters.parameter:sourceIdentifier.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. Parameters.parameter:targetSystem
Slice NametargetSystem
Definition

A parameter passed to or received from the operation.

ShorttargetSystem
Control2..2
TypeBackboneElement
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-1: A parameter must have one and only one of (value, resource, part) ((part.exists() and value.empty() and resource.empty()) or (part.empty() and (value.exists() xor resource.exists())))
62. Parameters.parameter:targetSystem.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
64. Parameters.parameter:targetSystem.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
66. Parameters.parameter:targetSystem.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
68. Parameters.parameter:targetSystem.name
Definition

The name of the parameter (reference to the operation definition).

ShortName from the definition
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Fixed ValuetargetSystem
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Parameters.parameter:targetSystem.value[x]
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control0..1
This element is affected by the following invariants: inv-1
Typeuri
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Parameters.parameter.value[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
72. Parameters.parameter:targetSystem.value[x]:valueUri
Slice NamevalueUri
Definition

If the parameter is a data type.

ShortIf parameter is a data type
Control1..1
This element is affected by the following invariants: inv-1
Typeuri
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Parameters.parameter:targetSystem.resource
Definition

If the parameter is a whole resource.

ShortIf parameter is a whole resource
Comments

When resolving references in resources, the operation definition may specify how references may be resolved between parameters. If a reference cannot be resolved between the parameters, the application should fall back to it's general resource resolution methods.

Control0..1
This element is affected by the following invariants: inv-1
TypeResource
Is Modifierfalse
Summarytrue
76. Parameters.parameter:targetSystem.part
Definition

A named part of a multi-part parameter.

ShortNamed part of a multi-part parameter
Comments

Only one level of nested parameters is allowed.

Control0..*
TypeSee ttp://hl7.org/fhir/StructureDefinition/Parameters#Parameters.parameter
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))