National Healthcare Directory Attestation and Verification
1.0.0-ballot - ballot United States of America flag

National Healthcare Directory Attestation and Verification, published by HL7 Patient Administration Working Group. This is not an authorized publication; it is the continuous build for version 1.0.0-ballot). This version is based on the current content of https://github.com/HL7/fhir-directory-attestation/ and changes regularly. See the Directory of published versions

Resource Profile: NatlDirAttestLocation - Detailed Descriptions

Active as of 2022-12-08

Definitions for the NatlDirAttest-Location resource profile.

Guidance on how to interpret the contents of this table can be found here.

1. Location

Guidance on how to interpret the contents of this table can be found here.

1. Location
Definition

Details and position information for a physical place where services are provided and resources and participants may be stored, found, contained, or accommodated.

Control0..*
InvariantsDefined on this element
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (: text.`div`.exists())
2. Location.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
3. Location.extension:accessibility
SliceNameaccessibility
Definition

An extension to describe accessibility options offered by a practitioner or at a location.

Control0..* This element is affected by the following invariants: ele-1
TypeExtension(Accessibility) (Extension Type: CodeableConcept)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
4. Location.extension:newpatients
SliceNamenewpatients
Definition

New Patients indicates whether new patients are being accepted in general, or from a specific network.
This extension is included in the PractitionerRole, HealthcareService, and Location profiles.
This provides needed flexibility for specifying whether a provider accepts new patients by location and network.

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control This element is affected by the following invariants: ele-1
TypeExtension(NewPatients) (Complex Extension)
InvariantsDefined on this element
ele-1: (: )
ext-1: (: )
new-patients-characteristics: If no new patients are accepted, no characteristics are allowed (: extension('acceptingPatients').valueCodeableConcept.coding.exists(code = 'no') implies extension('characteristics').empty())
5. Location.extension:region
SliceNameregion
Definition

A boundary shape that represents the outside edge of the location (in GeoJSON format) This shape may have holes, and disconnected shapes.

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(boundary-geojson) (Extension Type: Attachment)
Comments

The format of the content is GeoJSON in both the JSON and XML formats. It will be stored in the resource using the .data property, and externally referenced via the URL property. The mimetype to be used will be 'application/geo+json'.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
6. Location.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
7. Location.identifier
Definition

Unique code or number identifying the location to its users.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Must Supporttrue
Requirements

Organization label locations in registries, need to keep track of those.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
8. Location.status
Definition

The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location.

Control10..1
BindingThe codes SHALL be taken from LocationStatus

Indicates whether the location is still in use.

Typecode
Is Modifiertrue
Must Supporttrue
Fixed Valueactive
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
9. Location.name
Definition

Name of the location as used by humans. Does not need to be unique.

Control10..1
Typestring
Must Supporttrue
Comments

If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
10. Location.mode
Definition

Indicates whether a resource instance represents a specific location or a class of locations.

Control0..01
BindingThe codes SHALL be taken from LocationMode

Indicates whether a resource instance represents a specific location or a class of locations.

Typecode
Requirements

When using a Location resource for scheduling or orders, we need to be able to refer to a class of Locations instead of a specific Location.

Comments

This is labeled as a modifier because whether or not the location is a class of locations changes how it can be used and understood.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. Location.type
Definition

Indicates the type of function performed at the location.

Control0..*
BindingThe codes SHALL be taken from ServiceDeliveryLocationRoleType; other codes may be used where these codes are not suitable

Indicates the type of function performed at the location.

TypeCodeableConcept
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. Location.telecom
Definition

The contact details of communication devices available at the location. This can include phone numbers, fax numbers, mobile numbers, email addresses and web sites.

Control0..*
TypeContactPoint
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. Location.telecom.extension:contactpoint-availabletime
SliceNamecontactpoint-availabletime
Definition

An extension representing the days and times a contact point is available

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

TypeExtension(ContactPointAvailableTime) (Complex Extension)
InvariantsDefined on this element
ele-1: (: )
ext-1: (: )
14. Location.telecom.extension:via-intermediary
SliceNamevia-intermediary
Definition

A reference to an alternative point of contact (NatlDirEndpointQry-PractitionerRole, NatlDirEndpointQry-Organization, NatlDirEndpointQry-OrganizationAffiliation, or NatlDirEndpointQry-Location) for this organization

Control0..*
TypeExtension(ViaIntermediary) (Extension Type: Reference(NatlDirEndpointQryPractitionerRole|NatlDirEndpointQryOrganizationAffiliation|NatlDirEndpointQryLocation|NatlDirEndpointQryOrganization))
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
15. Location.telecom.use
Definition

Identifies the purpose for the contact point.

Control0..1
BindingThe codes SHALL be taken from ContactPointUse

Use of contact point.

Typecode
Is Modifiertrue
Requirements

Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

Comments

Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
16. Location.address
Definition

Physical location.

Control0..1
TypeAddress
Must Supporttrue
Requirements

If locations can be visited, we need to keep track of their address.

Comments

Additional addresses should be recorded using another instance of the Location resource, or via the Organization.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
17. Location.address.use
Definition

The purpose of this address.

Control0..1
BindingThe codes SHALL be taken from AddressUse

The use of an address.

Typecode
Is Modifiertrue
Requirements

Allows an appropriate address to be chosen from a list of many.

Comments

Applications can assume that an address is current unless it explicitly says that it is temporary or old.

Example
General:home
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
18. Location.address.line
Definition

This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information.

Control0..*
Typestring
Must Supporttrue
Example
General:137 Nowhere Street
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
19. Location.address.city
Definition

The name of the city, town, suburb, village or other community or delivery center.

Control0..1
Typestring
Must Supporttrue
Alternate NamesMunicpality
Example
General:Erewhon
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
20. Location.address.state
Definition

Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes).

Control0..1
BindingThe codes SHALL be taken from USPS Two Letter Alphabetic Codes; other codes may be used where these codes are not suitableFor codes, see (unbound) Two letter USPS alphabetic codes
Typestring
Must Supporttrue
Alternate NamesProvince, Territory
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
21. Location.address.postalCode
Definition

A postal code designating a region defined by the postal service.

Control0..1
Typestring
Must Supporttrue
Alternate NamesZip
Example
General:9132
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
22. Location.physicalType
Definition

Physical form of the location, e.g. building, room, vehicle, road.

Control0..1
BindingFor example codes, see LocationType

Physical form of the location.

TypeCodeableConcept
Must Supporttrue
Requirements

For purposes of showing relevant locations in queries, we need to categorize locations.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
23. Location.managingOrganization
Definition

The organization responsible for the provisioning and upkeep of the location.

Control0..1
TypeReference(NatlDirEndpointQryOrganization|Organization)
Must Supporttrue
Requirements

Need to know who manages the location.

Comments

This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
24. Location.partOf
Definition

Another Location of which this Location is physically a part of.

Control0..1
TypeReference(NatlDirEndpointQryLocation|Location)
Must Supporttrue
Requirements

For purposes of location, display and identification, knowing which locations are located within other locations is important.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
25. Location.endpoint
Definition

Technical endpoints providing access to services operated for the location.

Control0..*
TypeReference(NatlDirEndpointQryEndpoint|Endpoint)
Must Supporttrue
Requirements

Organizations may have different systems at different locations that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here.

1. Location
Definition

Details and position information for a physical place where services are provided and resources and participants may be stored, found, contained, or accommodated.

Control0..*
2. Location.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Control0..1
Typeid
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

3. Location.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Control0..1
TypeMeta
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
4. Location.meta.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
5. Location.meta.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Location.meta.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
6. Location.meta.versionId
Definition

The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

Control0..1
Typeid
Comments

The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. Location.meta.lastUpdated
Definition

When the resource last changed - e.g. when the version changed.

Control1..1
Typeinstant
Comments

This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
8. Location.meta.source
Definition

A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

Control0..1
Typeuri
Comments

In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
9. Location.meta.profile
Definition

A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

Control0..*
Typecanonical(StructureDefinition)
Comments

It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
10. Location.meta.security
Definition

Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

Control0..*
BindingThe codes SHALL be taken from All Security Labels; other codes may be used where these codes are not suitable Security Labels from the Healthcare Privacy and Security Classification System
TypeCoding
Comments

The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. Location.meta.tag
Definition

Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

Control0..*
BindingFor example codes, see CommonTags Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones"
TypeCoding
Comments

The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. Location.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. Location.language
Definition

The base language in which the resource is written.

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages A human language
Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. Location.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Control0..1
TypeNarrative
Alternate Namesnarrative, html, xhtml, display
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
15. Location.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Control0..*
TypeResource
Alternate Namesinline resources, anonymous resources, contained resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

16. Location.extension
Definition

An Extension

Control0..*
TypeExtension
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Location.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
17. Location.extension:accessibility
SliceNameaccessibility
Definition

An extension to describe accessibility options offered by a practitioner or at a location.

Control0..* This element is affected by the following invariants: ele-1
TypeExtension(Accessibility) (Extension Type: CodeableConcept)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
18. Location.extension:newpatients
SliceNamenewpatients
Definition

New Patients indicates whether new patients are being accepted in general, or from a specific network.
This extension is included in the PractitionerRole, HealthcareService, and Location profiles.
This provides needed flexibility for specifying whether a provider accepts new patients by location and network.

Control0..* This element is affected by the following invariants: ele-1
TypeExtension(NewPatients) (Complex Extension)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
new-patients-characteristics: If no new patients are accepted, no characteristics are allowed (: extension('acceptingPatients').valueCodeableConcept.coding.exists(code = 'no') implies extension('characteristics').empty())
19. Location.extension:region
SliceNameregion
Definition

A boundary shape that represents the outside edge of the location (in GeoJSON format) This shape may have holes, and disconnected shapes.

Control0..1 This element is affected by the following invariants: ele-1
TypeExtension(boundary-geojson) (Extension Type: Attachment)
Comments

The format of the content is GeoJSON in both the JSON and XML formats. It will be stored in the resource using the .data property, and externally referenced via the URL property. The mimetype to be used will be 'application/geo+json'.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
20. Location.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
21. Location.identifier
Definition

Unique code or number identifying the location to its users.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Must Supporttrue
Requirements

Organization label locations in registries, need to keep track of those.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
22. Location.status
Definition

The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location.

Control1..1
BindingThe codes SHALL be taken from LocationStatus Indicates whether the location is still in use
Typecode
Is Modifiertrue
Must Supporttrue
Fixed Valueactive
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
23. Location.operationalStatus
Definition

The operational status covers operation values most relevant to beds (but can also apply to rooms/units/chairs/etc. such as an isolation unit/dialysis chair). This typically covers concepts such as contamination, housekeeping, and other activities like maintenance.

Control0..1
BindingThe codes SHOULD be taken from hl7VS-bedStatus The operational status if the location (where typically a bed/room)
TypeCoding
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
24. Location.name
Definition

Name of the location as used by humans. Does not need to be unique.

Control1..1
Typestring
Must Supporttrue
Comments

If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
25. Location.alias
Definition

A list of alternate names that the location is known as, or was known as, in the past.

Control0..*
Typestring
Requirements

Over time locations and organizations go through many changes and can be known by different names.

For searching knowing previous names that the location was known by can be very useful.

Comments

There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the location.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
26. Location.description
Definition

Description of the Location, which helps in finding or referencing the place.

Control0..1
Typestring
Requirements

Humans need additional information to verify a correct location has been identified.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
27. Location.mode
Definition

Indicates whether a resource instance represents a specific location or a class of locations.

Control0..0
BindingThe codes SHALL be taken from LocationMode Indicates whether a resource instance represents a specific location or a class of locations
Typecode
Requirements

When using a Location resource for scheduling or orders, we need to be able to refer to a class of Locations instead of a specific Location.

Comments

This is labeled as a modifier because whether or not the location is a class of locations changes how it can be used and understood.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
28. Location.type
Definition

Indicates the type of function performed at the location.

Control0..*
BindingThe codes SHALL be taken from ServiceDeliveryLocationRoleType; other codes may be used where these codes are not suitable Indicates the type of function performed at the location
TypeCodeableConcept
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
29. Location.telecom
Definition

The contact details of communication devices available at the location. This can include phone numbers, fax numbers, mobile numbers, email addresses and web sites.

Control0..*
TypeContactPoint
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
30. Location.telecom.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
31. Location.telecom.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Location.telecom.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
32. Location.telecom.extension:contactpoint-availabletime
SliceNamecontactpoint-availabletime
Definition

An extension representing the days and times a contact point is available

Control0..*
TypeExtension(ContactPointAvailableTime) (Complex Extension)
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
33. Location.telecom.extension:via-intermediary
SliceNamevia-intermediary
Definition

A reference to an alternative point of contact (NatlDirEndpointQry-PractitionerRole, NatlDirEndpointQry-Organization, NatlDirEndpointQry-OrganizationAffiliation, or NatlDirEndpointQry-Location) for this organization

Control0..*
TypeExtension(ViaIntermediary) (Extension Type: Reference(NatlDirEndpointQryPractitionerRole|NatlDirEndpointQryOrganizationAffiliation|NatlDirEndpointQryLocation|NatlDirEndpointQryOrganization))
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
34. Location.telecom.system
Definition

Telecommunications form for contact point - what communications system is required to make use of the contact.

Control0..1 This element is affected by the following invariants: cpt-2
BindingThe codes SHALL be taken from ContactPointSystem Telecommunications form for contact point
Typecode
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
35. Location.telecom.value
Definition

The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

Control0..1
Typestring
Requirements

Need to support legacy numbers that are not in a tightly controlled format.

Comments

Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
36. Location.telecom.use
Definition

Identifies the purpose for the contact point.

Control0..1
BindingThe codes SHALL be taken from ContactPointUse Use of contact point
Typecode
Is Modifiertrue
Requirements

Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

Comments

Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
37. Location.telecom.rank
Definition

Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

Control0..1
TypepositiveInt
Comments

Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
38. Location.telecom.period
Definition

Time period when the contact point was/is in use.

Control0..1
TypePeriod
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
39. Location.address
Definition

Physical location.

Control0..1
TypeAddress
Must Supporttrue
Requirements

If locations can be visited, we need to keep track of their address.

Comments

Additional addresses should be recorded using another instance of the Location resource, or via the Organization.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
40. Location.address.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
41. Location.address.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Location.address.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
42. Location.address.use
Definition

The purpose of this address.

Control0..1
BindingThe codes SHALL be taken from AddressUse The use of an address
Typecode
Is Modifiertrue
Requirements

Allows an appropriate address to be chosen from a list of many.

Comments

Applications can assume that an address is current unless it explicitly says that it is temporary or old.

Example
General:home
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
43. Location.address.type
Definition

Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both.

Control0..1
BindingThe codes SHALL be taken from AddressType The type of an address (physical / postal)
Typecode
Comments

The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource).

Example
General:both
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
44. Location.address.text
Definition

Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts.

Control0..1
Typestring
Requirements

A renderable, unencoded form.

Comments

Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

Example
General:137 Nowhere Street, Erewhon 9132
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
45. Location.address.line
Definition

This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information.

Control0..*
Typestring
Must Supporttrue
Example
General:137 Nowhere Street
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
46. Location.address.city
Definition

The name of the city, town, suburb, village or other community or delivery center.

Control0..1
Typestring
Must Supporttrue
Alternate NamesMunicpality
Example
General:Erewhon
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
47. Location.address.district
Definition

The name of the administrative area (county).

Control0..1
Typestring
Alternate NamesCounty
Comments

District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead.

Example
General:Madison
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
48. Location.address.state
Definition

Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes).

Control0..1
BindingThe codes SHALL be taken from USPS Two Letter Alphabetic Codes; other codes may be used where these codes are not suitable Two letter USPS alphabetic codes
Typestring
Must Supporttrue
Alternate NamesProvince, Territory
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
49. Location.address.postalCode
Definition

A postal code designating a region defined by the postal service.

Control0..1
Typestring
Must Supporttrue
Alternate NamesZip
Example
General:9132
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
50. Location.address.country
Definition

Country - a nation as commonly understood or generally accepted.

Control0..1
Typestring
Comments

ISO 3166 3 letter codes can be used in place of a human readable country name.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
51. Location.address.period
Definition

Time period when address was/is in use.

Control0..1
TypePeriod
Requirements

Allows addresses to be placed in historical context.

Example
General:<valuePeriod xmlns="http://hl7.org/fhir">
  <start value="2010-03-23"/>
  <end value="2010-07-01"/>
</valuePeriod>
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
52. Location.physicalType
Definition

Physical form of the location, e.g. building, room, vehicle, road.

Control0..1
BindingFor example codes, see LocationType Physical form of the location
TypeCodeableConcept
Must Supporttrue
Requirements

For purposes of showing relevant locations in queries, we need to categorize locations.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
53. Location.position
Definition

The absolute geographic location of the Location, expressed using the WGS84 datum (This is the same co-ordinate system used in KML).

Control0..1
TypeBackboneElement
Requirements

For mobile applications and automated route-finding knowing the exact location of the Location is required.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
54. Location.position.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
55. Location.position.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
56. Location.position.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
57. Location.position.longitude
Definition

Longitude. The value domain and the interpretation are the same as for the text of the longitude element in KML (see notes below).

Control1..1
Typedecimal
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
58. Location.position.latitude
Definition

Latitude. The value domain and the interpretation are the same as for the text of the latitude element in KML (see notes below).

Control1..1
Typedecimal
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
59. Location.position.altitude
Definition

Altitude. The value domain and the interpretation are the same as for the text of the altitude element in KML (see notes below).

Control0..1
Typedecimal
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
60. Location.managingOrganization
Definition

The organization responsible for the provisioning and upkeep of the location.

Control0..1
TypeReference(NatlDirEndpointQryOrganization)
Must Supporttrue
Requirements

Need to know who manages the location.

Comments

This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
61. Location.partOf
Definition

Another Location of which this Location is physically a part of.

Control0..1
TypeReference(NatlDirEndpointQryLocation)
Must Supporttrue
Requirements

For purposes of location, display and identification, knowing which locations are located within other locations is important.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
62. Location.hoursOfOperation
Definition

What days/times during a week is this location usually open.

Control0..*
TypeBackboneElement
Comments

This type of information is commonly found published in directories and on websites informing customers when the facility is available.

Specific services within the location may have their own hours which could be shorter (or longer) than the locations hours.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
63. Location.hoursOfOperation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
64. Location.hoursOfOperation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
65. Location.hoursOfOperation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
66. Location.hoursOfOperation.daysOfWeek
Definition

Indicates which days of the week are available between the start and end Times.

Control0..*
BindingThe codes SHALL be taken from DaysOfWeek The days of the week
Typecode
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
67. Location.hoursOfOperation.allDay
Definition

The Location is open all day.

Control0..1
Typeboolean
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
68. Location.hoursOfOperation.openingTime
Definition

Time that the Location opens.

Control0..1
Typetime
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
69. Location.hoursOfOperation.closingTime
Definition

Time that the Location closes.

Control0..1
Typetime
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
70. Location.availabilityExceptions
Definition

A description of when the locations opening ours are different to normal, e.g. public holiday availability. Succinctly describing all possible exceptions to normal site availability as detailed in the opening hours Times.

Control0..1
Typestring
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
71. Location.endpoint
Definition

Technical endpoints providing access to services operated for the location.

Control0..*
TypeReference(NatlDirEndpointQryEndpoint)
Must Supporttrue
Requirements

Organizations may have different systems at different locations that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))