Clinical Practice Guidelines
2.0.0-ballot - ballot International flag

Clinical Practice Guidelines, published by HL7 International / Clinical Decision Support. This guide is not an authorized publication; it is the continuous build for version 2.0.0-ballot built by the FHIR (HL7® FHIR® Standard) CI Build. This version is based on the current content of https://github.com/HL7/cqf-recommendations/ and changes regularly. See the Directory of published versions

Resource Profile: CPGMedicationDispense - Detailed Descriptions

Active as of 2024-04-14

Definitions for the cpg-medicationdispense resource profile.

Guidance on how to interpret the contents of this table can be found here

0. MedicationDispense
2. MedicationDispense.extension
SlicingThis element introduces a set of slices on MedicationDispense.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. MedicationDispense.extension:instantiatesCaseFeature
    Slice NameinstantiatesCaseFeature
    Control0..1
    TypeExtension(CPG Instantiates Case Feature Extension) (Extension Type: canonical(CPG Case Feature Definition))
    Must Supporttrue
    6. MedicationDispense.extension:caseFeatureType
    Slice NamecaseFeatureType
    Control0..1
    TypeExtension(CPG Case Feature Type Extension) (Extension Type: code)
    Must Supporttrue
    8. MedicationDispense.extension:caseFeaturePertinence
    Slice NamecaseFeaturePertinence
    Control0..1
    TypeExtension(CPG Case Feature Pertinence Extension) (Extension Type: code)
    Must Supporttrue
    10. MedicationDispense.identifier
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Must Supporttrue
    12. MedicationDispense.status
    Must Supporttrue
    14. MedicationDispense.statusReason[x]
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Must Supporttrue
    16. MedicationDispense.category
    Must Supporttrue
    18. MedicationDispense.medication[x]
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Must Supporttrue
    20. MedicationDispense.subject
    Must Supporttrue
    22. MedicationDispense.context
    Must Supporttrue
    24. MedicationDispense.supportingInformation
    Definition

    The pertinent positive or negative information relative to this event.

    ShortPertinent information
    Must Supporttrue
    26. MedicationDispense.authorizingPrescription
    Must Supporttrue

    Guidance on how to interpret the contents of this table can be found here

    0. MedicationDispense
    Definition

    Indicates that a medication product is to be or has been dispensed for a named person/patient. This includes a description of the medication product (supply) provided and the instructions for administering the medication. The medication dispense is the result of a pharmacy system responding to a medication order.

    ShortDispensing a medication to a named patient
    Control0..*
    Is Modifierfalse
    Summaryfalse
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    mdd-1: whenHandedOver cannot be before whenPrepared (whenHandedOver.empty() or whenPrepared.empty() or whenHandedOver >= whenPrepared)
    mdd-1: whenHandedOver cannot be before whenPrepared (whenHandedOver.empty() or whenPrepared.empty() or whenHandedOver >= whenPrepared)
    2. MedicationDispense.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. MedicationDispense.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on MedicationDispense.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 6. MedicationDispense.extension:instantiatesCaseFeature
      Slice NameinstantiatesCaseFeature
      Definition

      References the definition for this case feature.

      ShortCPG Instantiates Case Feature Extension
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(CPG Instantiates Case Feature Extension) (Extension Type: canonical(CPG Case Feature Definition))
      Is Modifierfalse
      Must Supporttrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      8. MedicationDispense.extension:caseFeatureType
      Slice NamecaseFeatureType
      Definition

      Describes whether the case feature is asserted or inferred.

      ShortCPG Case Feature Type Extension
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(CPG Case Feature Type Extension) (Extension Type: code)
      Is Modifierfalse
      Must Supporttrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      10. MedicationDispense.extension:caseFeaturePertinence
      Slice NamecaseFeaturePertinence
      Definition

      Describes the pertinence of the case feature.

      ShortCPG Case Feature Pertinence Extension
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(CPG Case Feature Pertinence Extension) (Extension Type: code)
      Is Modifierfalse
      Must Supporttrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      12. MedicationDispense.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      14. MedicationDispense.identifier
      Definition

      Identifiers associated with this Medication Dispense that are defined by business processes and/or used to refer to it when a direct URL reference to the resource itself is not appropriate. They are business identifiers assigned to this resource by the performer or other systems and remain constant as the resource is updated and propagates from server to server.

      ShortExternal identifier
      Comments

      This is a business identifier, not a resource identifier.

      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      TypeIdentifier
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. MedicationDispense.status
      Definition

      A code specifying the state of the set of dispense events.

      Shortpreparation | in-progress | cancelled | on-hold | completed | entered-in-error | stopped | declined | unknown
      Comments

      This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

      Control1..1
      BindingThe codes SHALL be taken from MedicationDispense Status Codeshttp://hl7.org/fhir/ValueSet/medicationdispense-status|4.0.1
      (required to http://hl7.org/fhir/ValueSet/medicationdispense-status|4.0.1)

      A coded concept specifying the state of the dispense event.

      Typecode
      Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. MedicationDispense.statusReason[x]
      Definition

      Indicates the reason why a dispense was not performed.

      ShortWhy a dispense was not performed
      Control0..1
      BindingFor example codes, see MedicationDispense Status Reason Codeshttp://hl7.org/fhir/ValueSet/medicationdispense-status-reason
      (example to http://hl7.org/fhir/ValueSet/medicationdispense-status-reason)

      A code describing why a dispense was not performed.

      TypeChoice of: CodeableConcept, Reference(DetectedIssue)
      [x] NoteSee Choice of Data Types for further information about how to use [x]
      Is Modifierfalse
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. MedicationDispense.category
      Definition

      Indicates the type of medication dispense (for example, where the medication is expected to be consumed or administered (i.e. inpatient or outpatient)).

      ShortType of medication dispense
      Comments

      The category can be used to include where the medication is expected to be consumed or other types of dispenses. Invariants can be used to bind to different value sets when profiling to bind.

      Control0..1
      BindingThe codes SHOULD be taken from MedicationDispense Category Codeshttp://hl7.org/fhir/ValueSet/medicationdispense-category
      (preferred to http://hl7.org/fhir/ValueSet/medicationdispense-category)

      A code describing where the dispensed medication is expected to be consumed or administered.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. MedicationDispense.medication[x]
      Definition

      Identifies the medication being administered. This is either a link to a resource representing the details of the medication or a simple attribute carrying a code that identifies the medication from a known list of medications.

      ShortWhat medication was supplied
      Comments

      If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. For example, if you require form or lot number, then you must reference the Medication resource.

      Control1..1
      BindingFor example codes, see SNOMEDCTMedicationCodeshttp://hl7.org/fhir/ValueSet/medication-codes
      (example to http://hl7.org/fhir/ValueSet/medication-codes)

      A coded concept identifying which substance or product can be dispensed.

      TypeChoice of: CodeableConcept, Reference(Medication)
      [x] NoteSee Choice of Data Types for further information about how to use [x]
      Is Modifierfalse
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. MedicationDispense.subject
      Definition

      A link to a resource representing the person or the group to whom the medication will be given.

      ShortWho the dispense is for
      Comments

      SubstanceAdministration->subject->Patient.

      Control0..1
      TypeReference(Patient, Group)
      Is Modifierfalse
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. MedicationDispense.context
      Definition

      The encounter or episode of care that establishes the context for this event.

      ShortEncounter / Episode associated with event
      Control0..1
      TypeReference(Encounter, EpisodeOfCare)
      Is Modifierfalse
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. MedicationDispense.supportingInformation
      Definition

      The pertinent positive or negative information relative to this event.


      Additional information that supports the medication being dispensed.

      ShortPertinent informationInformation that supports the dispensing of the medication
      Control0..*
      TypeReference(Resource)
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. MedicationDispense.authorizingPrescription
      Definition

      Indicates the medication order that is being dispensed against.

      ShortMedication order that authorizes the dispense
      Comments

      Maps to basedOn in Event logical model.

      Control0..*
      TypeReference(MedicationRequest)
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be found here

      0. MedicationDispense
      Definition

      Indicates that a medication product is to be or has been dispensed for a named person/patient. This includes a description of the medication product (supply) provided and the instructions for administering the medication. The medication dispense is the result of a pharmacy system responding to a medication order.

      ShortDispensing a medication to a named patient
      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      mdd-1: whenHandedOver cannot be before whenPrepared (whenHandedOver.empty() or whenPrepared.empty() or whenHandedOver >= whenPrepared)
      2. MedicationDispense.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. MedicationDispense.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. MedicationDispense.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. MedicationDispense.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages)

      A human language.

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. MedicationDispense.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      TypeNarrative
      Is Modifierfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. MedicationDispense.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

      Control0..*
      TypeResource
      Is Modifierfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. MedicationDispense.extension
      Definition

      An Extension

      ShortExtension
      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on MedicationDispense.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 16. MedicationDispense.extension:instantiatesCaseFeature
        Slice NameinstantiatesCaseFeature
        Definition

        References the definition for this case feature.

        ShortCPG Instantiates Case Feature Extension
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(CPG Instantiates Case Feature Extension) (Extension Type: canonical(CPG Case Feature Definition))
        Is Modifierfalse
        Must Supporttrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        18. MedicationDispense.extension:caseFeatureType
        Slice NamecaseFeatureType
        Definition

        Describes whether the case feature is asserted or inferred.

        ShortCPG Case Feature Type Extension
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(CPG Case Feature Type Extension) (Extension Type: code)
        Is Modifierfalse
        Must Supporttrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        20. MedicationDispense.extension:caseFeaturePertinence
        Slice NamecaseFeaturePertinence
        Definition

        Describes the pertinence of the case feature.

        ShortCPG Case Feature Pertinence Extension
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(CPG Case Feature Pertinence Extension) (Extension Type: code)
        Is Modifierfalse
        Must Supporttrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        22. MedicationDispense.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        24. MedicationDispense.identifier
        Definition

        Identifiers associated with this Medication Dispense that are defined by business processes and/or used to refer to it when a direct URL reference to the resource itself is not appropriate. They are business identifiers assigned to this resource by the performer or other systems and remain constant as the resource is updated and propagates from server to server.

        ShortExternal identifier
        Comments

        This is a business identifier, not a resource identifier.

        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. MedicationDispense.partOf
        Definition

        The procedure that trigger the dispense.

        ShortEvent that dispense is part of
        Control0..*
        TypeReference(Procedure)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. MedicationDispense.status
        Definition

        A code specifying the state of the set of dispense events.

        Shortpreparation | in-progress | cancelled | on-hold | completed | entered-in-error | stopped | declined | unknown
        Comments

        This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

        Control1..1
        BindingThe codes SHALL be taken from MedicationDispense Status Codes
        (required to http://hl7.org/fhir/ValueSet/medicationdispense-status|4.0.1)

        A coded concept specifying the state of the dispense event.

        Typecode
        Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. MedicationDispense.statusReason[x]
        Definition

        Indicates the reason why a dispense was not performed.

        ShortWhy a dispense was not performed
        Control0..1
        BindingFor example codes, see MedicationDispense Status Reason Codes
        (example to http://hl7.org/fhir/ValueSet/medicationdispense-status-reason)

        A code describing why a dispense was not performed.

        TypeChoice of: CodeableConcept, Reference(DetectedIssue)
        [x] NoteSee Choice of Data Types for further information about how to use [x]
        Is Modifierfalse
        Must Supporttrue
        Must Support TypesNo must-support rules about the choice of types/profiles
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        32. MedicationDispense.category
        Definition

        Indicates the type of medication dispense (for example, where the medication is expected to be consumed or administered (i.e. inpatient or outpatient)).

        ShortType of medication dispense
        Comments

        The category can be used to include where the medication is expected to be consumed or other types of dispenses. Invariants can be used to bind to different value sets when profiling to bind.

        Control0..1
        BindingThe codes SHOULD be taken from MedicationDispense Category Codes
        (preferred to http://hl7.org/fhir/ValueSet/medicationdispense-category)

        A code describing where the dispensed medication is expected to be consumed or administered.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        34. MedicationDispense.medication[x]
        Definition

        Identifies the medication being administered. This is either a link to a resource representing the details of the medication or a simple attribute carrying a code that identifies the medication from a known list of medications.

        ShortWhat medication was supplied
        Comments

        If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. For example, if you require form or lot number, then you must reference the Medication resource.

        Control1..1
        BindingFor example codes, see SNOMEDCTMedicationCodes
        (example to http://hl7.org/fhir/ValueSet/medication-codes)

        A coded concept identifying which substance or product can be dispensed.

        TypeChoice of: CodeableConcept, Reference(Medication)
        [x] NoteSee Choice of Data Types for further information about how to use [x]
        Is Modifierfalse
        Must Supporttrue
        Must Support TypesNo must-support rules about the choice of types/profiles
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        36. MedicationDispense.subject
        Definition

        A link to a resource representing the person or the group to whom the medication will be given.

        ShortWho the dispense is for
        Comments

        SubstanceAdministration->subject->Patient.

        Control0..1
        TypeReference(Patient, Group)
        Is Modifierfalse
        Must Supporttrue
        Must Support TypesNo must-support rules about the choice of types/profiles
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        38. MedicationDispense.context
        Definition

        The encounter or episode of care that establishes the context for this event.

        ShortEncounter / Episode associated with event
        Control0..1
        TypeReference(Encounter, EpisodeOfCare)
        Is Modifierfalse
        Must Supporttrue
        Must Support TypesNo must-support rules about the choice of types/profiles
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. MedicationDispense.supportingInformation
        Definition

        The pertinent positive or negative information relative to this event.

        ShortPertinent information
        Control0..*
        TypeReference(Resource)
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. MedicationDispense.performer
        Definition

        Indicates who or what performed the event.

        ShortWho performed event
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        44. MedicationDispense.performer.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        46. MedicationDispense.performer.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        48. MedicationDispense.performer.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        50. MedicationDispense.performer.function
        Definition

        Distinguishes the type of performer in the dispense. For example, date enterer, packager, final checker.

        ShortWho performed the dispense and what they did
        Control0..1
        BindingFor example codes, see MedicationDispense Performer Function Codes
        (example to http://hl7.org/fhir/ValueSet/medicationdispense-performer-function)

        A code describing the role an individual played in dispensing a medication.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Allows disambiguation of the types of involvement of different performers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        52. MedicationDispense.performer.actor
        Definition

        The device, practitioner, etc. who performed the action. It should be assumed that the actor is the dispenser of the medication.

        ShortIndividual who was performing
        Control1..1
        TypeReference(Practitioner, PractitionerRole, Organization, Patient, Device, RelatedPerson)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        54. MedicationDispense.location
        Definition

        The principal physical location where the dispense was performed.

        ShortWhere the dispense occurred
        Control0..1
        TypeReference(Location)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        56. MedicationDispense.authorizingPrescription
        Definition

        Indicates the medication order that is being dispensed against.

        ShortMedication order that authorizes the dispense
        Comments

        Maps to basedOn in Event logical model.

        Control0..*
        TypeReference(MedicationRequest)
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        58. MedicationDispense.type
        Definition

        Indicates the type of dispensing event that is performed. For example, Trial Fill, Completion of Trial, Partial Fill, Emergency Fill, Samples, etc.

        ShortTrial fill, partial fill, emergency fill, etc.
        Control0..1
        BindingFor example codes, see ActPharmacySupplyType
        (example to http://terminology.hl7.org/ValueSet/v3-ActPharmacySupplyType)

        Indicates the type of dispensing event that is performed. For example, Trial Fill, Completion of Trial, Partial Fill, Emergency Fill, Samples, etc.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        60. MedicationDispense.quantity
        Definition

        The amount of medication that has been dispensed. Includes unit of measure.

        ShortAmount dispensed
        Control0..1
        TypeQuantity(SimpleQuantity)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        62. MedicationDispense.daysSupply
        Definition

        The amount of medication expressed as a timing amount.

        ShortAmount of medication expressed as a timing amount
        Control0..1
        TypeQuantity(SimpleQuantity)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        64. MedicationDispense.whenPrepared
        Definition

        The time when the dispensed product was packaged and reviewed.

        ShortWhen product was packaged and reviewed
        Control0..1
        TypedateTime
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        66. MedicationDispense.whenHandedOver
        Definition

        The time the dispensed product was provided to the patient or their representative.

        ShortWhen product was given out
        Control0..1
        TypedateTime
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        68. MedicationDispense.destination
        Definition

        Identification of the facility/location where the medication was shipped to, as part of the dispense event.

        ShortWhere the medication was sent
        Control0..1
        TypeReference(Location)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        70. MedicationDispense.receiver
        Definition

        Identifies the person who picked up the medication. This will usually be a patient or their caregiver, but some cases exist where it can be a healthcare professional.

        ShortWho collected the medication
        Control0..*
        TypeReference(Patient, Practitioner)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        72. MedicationDispense.note
        Definition

        Extra information about the dispense that could not be conveyed in the other attributes.

        ShortInformation about the dispense
        Control0..*
        TypeAnnotation
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        74. MedicationDispense.dosageInstruction
        Definition

        Indicates how the medication is to be used by the patient.

        ShortHow the medication is to be used by the patient or administered by the caregiver
        Comments

        When the dose or rate is intended to change over the entire administration period (e.g. Tapering dose prescriptions), multiple instances of dosage instructions will need to be supplied to convey the different doses/rates. The pharmacist reviews the medication order prior to dispense and updates the dosageInstruction based on the actual product being dispensed.

        Control0..*
        TypeDosage
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        76. MedicationDispense.substitution
        Definition

        Indicates whether or not substitution was made as part of the dispense. In some cases, substitution will be expected but does not happen, in other cases substitution is not expected but does happen. This block explains what substitution did or did not happen and why. If nothing is specified, substitution was not done.

        ShortWhether a substitution was performed on the dispense
        Control0..1
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        78. MedicationDispense.substitution.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        80. MedicationDispense.substitution.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        82. MedicationDispense.substitution.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        84. MedicationDispense.substitution.wasSubstituted
        Definition

        True if the dispenser dispensed a different drug or product from what was prescribed.

        ShortWhether a substitution was or was not performed on the dispense
        Control1..1
        Typeboolean
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        86. MedicationDispense.substitution.type
        Definition

        A code signifying whether a different drug was dispensed from what was prescribed.

        ShortCode signifying whether a different drug was dispensed from what was prescribed
        Control0..1
        BindingFor example codes, see ActSubstanceAdminSubstitutionCode
        (example to http://terminology.hl7.org/ValueSet/v3-ActSubstanceAdminSubstitutionCode)

        A coded concept describing whether a different medicinal product may be dispensed other than the product as specified exactly in the prescription.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        88. MedicationDispense.substitution.reason
        Definition

        Indicates the reason for the substitution (or lack of substitution) from what was prescribed.

        ShortWhy was substitution made
        Control0..*
        BindingFor example codes, see SubstanceAdminSubstitutionReason
        (example to http://terminology.hl7.org/ValueSet/v3-SubstanceAdminSubstitutionReason)

        A coded concept describing the reason that a different medication should (or should not) be substituted from what was prescribed.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        90. MedicationDispense.substitution.responsibleParty
        Definition

        The person or organization that has primary responsibility for the substitution.

        ShortWho is responsible for the substitution
        Control0..*
        TypeReference(Practitioner, PractitionerRole)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        92. MedicationDispense.detectedIssue
        Definition

        Indicates an actual or potential clinical issue with or between one or more active or proposed clinical actions for a patient; e.g. drug-drug interaction, duplicate therapy, dosage alert etc.

        ShortClinical issue with action
        Comments

        This element can include a detected issue that has been identified either by a decision support system or by a clinician and may include information on the steps that were taken to address the issue.

        Control0..*
        TypeReference(DetectedIssue)
        Is Modifierfalse
        Summaryfalse
        Alternate NamesContraindication, Drug Utilization Review (DUR), Alert
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        94. MedicationDispense.eventHistory
        Definition

        A summary of the events of interest that have occurred, such as when the dispense was verified.

        ShortA list of relevant lifecycle events
        Comments

        This might not include provenances for all versions of the request – only those deemed “relevant” or important. This SHALL NOT include the Provenance associated with this current version of the resource. (If that provenance is deemed to be a “relevant” change, it will need to be added as part of a later update. Until then, it can be queried directly as the Provenance that points to this version using _revinclude All Provenances should have some historical version of this Request as their subject.).

        Control0..*
        TypeReference(Provenance)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))